Resumo O objetivo deste estudo clínico, prospectivo, randomizado e paralelo foi avaliar diferentes tratamentos em consultório para hipersensibilidade dentinária (HD). Cento e noventa e dois dentes com exposições radiculares não cavitadas foram tratados com diferentes dessensibilizantes: verniz fluoretado (Duraphat - FLU); solução cerâmica bioativa (Biosilicato - BIOS); adesivo autocondicionante universal (Single Bond Universal - SBU); verniz fotoativado bioativo (PRG filler - SPRG). O grau de HD foi analisado por meio da escala visual analógica (VAS) e da escala visual computadorizada (CoVAS), antes dos tratamentos e após 7, 15 e 30 dias da primeira sessão. As comparações entre dessensibilizantes foram feitas pelos testes de Kruskal-Wallis e Dunn. O teste de Friedman foi utilizado para comparação entre os tempos (p ≤ 0,05). Comparando os dessensibilizantes, o FLU apresentou um valor de HD maior do que o BIOS usando VAS aos 7 dias, no entanto, nenhuma diferença foi encontrada usando a análise CoVAS. Comparando os tempos, BIOS e SBU apresentaram redução de HD após 7 dias e SBU apresentou redução aos 30 dias em comparação com 7 dias usando VAS. Os grupos FLU e SPRG reduziram a HD em 15 dias a 30 dias usando VAS. Houve redução de HD para FLU, BIOS e SBU após 7 dias e para BIOS essa redução também ocorreu aos 30 dias quando comparada a 15 dias usando CoVAS. O grupo SPRG apresentou redução de 15 para 30 dias. Todos os dessensibilizantes testados foram capazes de reduzir a sensibilidade inicial. A solução de cerâmica bioativa reduziu o HD gradualmente após 30 dias usando análise computadorizada. clínico prospectivo HD. . (HD) Duraphat FLU) Biosilicato BIOS) Single SBU) PRG SPRG. SPRG) (VAS CoVAS, CoVAS , (CoVAS) 1 3 sessão KruskalWallis Kruskal Wallis Dunn p 0,05. 005 0,05 0 05 0,05) entanto inicial (HD (CoVAS 00 0,0 0,

Abstract The aim of this clinical, prospective, randomized, and parallel study was to evaluate different in-office treatments for dentin hypersensitivity (DH). One hundred ninety-two teeth with non-cavitated root exposures were treated using different desensitizers: fluoride varnish (Duraphat - FLU); bioactive ceramic solution (Biosilicate - BIOS); universal self-etching adhesive (Single Bond Universal - SBU); bioactive photoactivated varnish (PRG filler - SPRG). The degree of DH was analyzed using a visual analog scale (VAS) and computerized visual scale (CoVAS), before treatments and after 7, 15, and 30 days from the first session. Comparisons among desensitizers were performed using the Kruskal-Wallis and Dunn's tests. Friedman test was used to compare between times (p ≤ 0.05). Comparing desensitizers FLU presented a higher value of DH than BIOS using VAS at 7 days, however, no differences were found using CoVAS analysis. Comparing times, BIOS and SBU showed a reduction in DH after 7 days and SBU showed a reduction at 30 days compared to 7 days using VAS. FLU and SPRG groups reduced DH from 15 days to 30 days using VAS. There was a reduction in DH for FLU, BIOS, and SBU after 7 days and for BIOS this reduction also occurred at 30 days when compared to 15 days using CoVAS. SPRG group showed a reduction from 15 to 30 days. All desensitizers tested were able to reduce the initial sensitivity. The bioactive ceramic solution reduced the DH gradually after 30 days using computerized analysis. clinical prospective randomized inoffice office DH. . (DH) ninetytwo ninety two noncavitated non cavitated Duraphat FLU) Biosilicate BIOS) selfetching self etching Single SBU) PRG SPRG. SPRG) (VAS CoVAS, , (CoVAS) 3 session KruskalWallis Kruskal Wallis Dunns Dunn s tests p 0.05. 005 0.05 0 05 0.05) however analysis 1 sensitivity (DH (CoVAS 00 0.0 0.

Abstract The effectiveness of at-home dental bleaching treatments depends on the time that bleaching products are in contact with the teeth surface and, consequently, on the adequate use of associated custom acetate trays. Objective This randomized single-blinded trial aimed to analyze if the daily usage time of these products influences the patient’s compliance behavior when submitted to monitored at-home dental bleaching. Secondary outcomes were color change and tooth sensitivity. Methodology Sixty-six volunteers were randomly distributed into three groups (n=22): patients were instructed to use the trays for 2 (G2), 4 (G4), and 8 (G8) hours daily. The daily dental bleaching compliance behavior was measured using a microsensor inserted into the trays. Subjective and objective color evaluation assessments were adopted at baseline (T0), one (T1), two (T2), and three weeks (T3) after the beginning of the bleaching treatment, as well as two weeks after the treatment (T4). Tooth sensitivity was analyzed using the VAS scale, ranging from T1 to T4. Results G2 showed a greater degree of cooperation than G8 and cooperation was inversely proportional to the recommended usage time. Significantly higher color change was observed in the upper arch for G8 when compared to G2 in subjective analysis, from T1 to T4. There were no statistical differences between the groups in objective analysis. Conclusion Shorter recommended usage time of the bleaching product may improve the patient's compliance with at-home dental bleaching treatments. However, increased daily usage time may promote better subjective color change. Bleaching sensitivity was more significant in the first week for a longer time of use. athome home consequently singleblinded single blinded patient s Sixtysix Sixty six n=22 n22 n 22 (n=22) G2, G , (G2) G4, G4 (G4) (G8 T0, T0 T (T0) T1, (T1) T2, T2 (T2) T3 (T3 T4 . (T4) scale analysis However n=2 n2 (n=22 (G2 (G4 (G (T0 (T1 (T2 (T (T4 n= (n=2 (n= (n

Resumo Introdução dentifrícios fluoretados são amplamente utilizados pela população. Foram desenvolvidos dentifrícios com alta concentração de fluoreto de sódio e presença de tricálcio fosfato, fornecendo proteção adicional a pacientes vulneráveis ao desenvolvimento da cárie. Objetivo o objetivo deste estudo foi avaliar a influência de diferentes dentifrícios na dureza superficial, interna e desgaste do esmalte após cárie artificial, ciclagem de pH e escovação. Material e método blocos de esmalte (4x4 mm) foram obtidos a partir de 20 dentes bovinos. Os espécimes foram submetidos à lesão de cárie artificial e, em seguida, à ciclagem de pH e escovação de acordo com o dentifrício: Colgate Total 12 e Clinpro + Tricálcio Fosfato. Após este período, foram submetidos à análise de dureza superficial e interna e perfilometria. Foi realizada microscopia eletrônica de varredura. Resultado os dados obtidos foram avaliados por ANOVA um critério para avaliar a recuperação mineral e perfilometria, ANOVA dois critérios medidas repetidas para avaliar a dureza superficial e interna. Conclusão analisando a dureza superficial, após a indução da cárie houve uma redução significativa na dureza que foi parcialmente recuperada independente do dentifrício utilizado. Para dureza interna, Clinpro obteve valores menores no lado controle e até 90 micrômetros no lado teste. Quanto à perfilometria, o Colgate Total 12 apresentou maior desgaste quando comparado ao Clinpro. Concluiu-se que Clinpro promoveu menor dureza interna, porém, o Colgate Total 12 resultou em maior desgaste superficial do esmalte dentário. população fosfato 4x4 x (4x mm 2 bovinos seguida 1 Fosfato período perfilometria varredura utilizado 9 teste Concluiuse Concluiu se porém dentário 4x

Abstract Introduction fluoride toothpaste is widely used by the population. Objective dentifrices with a high concentration of sodium fluoride and the presence of tricalcium phosphate were developed, providing additional protection to patients vulnerable to the development of caries. This study aimed to evaluate the influence of different dentifrices on the surface and internal hardness and enamel wear after artificial caries, pH cycling, and toothbrushing. Material and method enamel blocks (4x4 mm) were obtained from 20 bovine teeth. The specimens were submitted to artificial caries lesion and then to pH cycling and brushing according to the dentifrice: Colgate Total 12 and Clinpro + Tricalcium Phosphate. Result after this period, they were submitted to analysis of superficial and internal hardness and profilometry. Scanning Electron Microscopy (SEM) was performed. The data obtained were evaluated by one-way Analysis of Variance (ANOVA) to evaluate the mineral recovery and profilometry, and two-way repeated measures ANOVA to evaluate the superficial and internal hardness. Conclusion analyzing the surface hardness, after caries induction, there was a significant reduction in hardness that was partially recovered regardless of the dentifrice used. For internal hardness, Clinpro obtained lower values on the control side and up to 90 micrometers on the test side. As for profilometry, Colgate Total 12 showed greater wear when compared to Clinpro. It was concluded that Clinpro promoted lower internal hardness, however, Colgate Total 12 resulted in greater surface wear of tooth enamel. population developed toothbrushing 4x4 x (4x mm 2 teeth 1 Phosphate period profilometry SEM (SEM performed oneway one way (ANOVA twoway two induction 9 however 4x

Abstract: Objective: To evaluate non-carious cervical lesions (NCCLs) restored with different adhesion strategies. Methodology: This is a prospective, randomized, double-blind, split-mouth study. An adhesive restorative system (Single Bond Universal/Filtek Z350XT – SBU) was evaluated both without and with selective enamel conditioning (E-SBU), resin-modified glass-ionomer cements (Vitremer; RMGIC), and ethylenediaminetetraacetic acid pretreatment (EDTA; E-RMGIC). In total, 200 restorations, placed in 50 patients, were evaluated at baseline and at a 3-year follow-up using the modified United States Public Health Service (USPHS) criteria. Data were analyzed using the two-proportion equality test, multinomial logistic regression, Wilcoxon test, and Kaplan-Meier survival curves. Results: In total, 42 (84%) patients returned for the 3-year follow-up. SBU showed restoration losses statistically different from RMGIC. Retention was also statistically different in SBU between baseline and the 3-year follow-up. Marginal defects and surface texture were statistically significant for all groups in the period studied, except for the surface texture of SBU and the marginal integrity in E-RMGIC. We observed no statistically significant difference in wear, secondary caries, anatomical form, surface staining, and color over time. Recession degree was the only factor to influence retention rates. Cumulative survival (%) was 89, 98, 98, and 95.3, for SBU, SE-SBU, RMGIC, and E-RMGIC, respectively, without significant differences among them. There was a statistically significant difference between survival curves; however, multiple comparison procedures found no statistical differences. Conclusion: Selective enamel etching affected the retention of non-carious cervical restorations. Adhesion using EDTA and resin-modified glass-ionomer cements delayed marginal defects over time. The degree of gingival recession influenced retention rates. Resin composite restorations showed initial marginal defects, and ionomer restorations, reduced surface luster. EDTA pre-treatment followed by resin-modified glass-ionomer cements may be a promising adhesion strategy for NCCL restorations.

Abstract Objective This study aimed to evaluate the effects of different toothpastes on the surface wear of enamel, dentin, composite resin (CR), and resin-modified glass ionomer cement (RMGIC), and to perform a topographic analysis of the surfaces, based on representative images generated by atomic force microscopy (AFM) after erosion-abrasion cycles. Methodology One hundred and forty bovine incisors were collected and divided into two groups: 72 enamel and 72 dentin blocks (4×4 mm). Half of the specimens were restored with CR (Filtek Z350 XT) and the other half with RMGIC (Fuji II LC). Then, samples were submitted to a demineralization cycle (5 days, 4×2 min/day, 1% citric acid, pH 3.2) and exposed to three different toothpastes (2×15 s/day): without fluoride (WF, n=12), sodium fluoride-based (NaF, n=12), and stannous fluoride-based (SnF2, n=12). Surface wear, as well as restoration interfaces wear, were investigated by profilometry of the dental substrates and restorative materials. All representative surfaces underwent AFM analysis. Data were analyzed by two-way analysis of variance and Tukey’s tests (α=0.05). Results NaF-based toothpaste caused the greater dentin surface wear (p<0.05). Toothpastes affected only enamel-restoration interfaces. AFM analysis showed precipitate formation in dentinal tubules caused by the use of fluoride toothpastes. Conclusions NaF-based toothpastes had no protective effect on enamel adjacent to CR and RMGIC against erosion-abrasion challenges, nor on dentin adjacent to RMGIC material. SnF2-based toothpastes caused more damage to interfaces between enamel and RMGIC.

Abstract Objective The aim of this study was to compare two in vitro erosion protocols, in which one simulates in vivo conditions experienced by patients with gastroesophageal disorders or bulimia (HCl-pepsin protocol), and the other simulates the diet of an individual who consumes a high volume of erosive beverages (citric acid protocol). In addition, the mechanical properties and surface gloss of eroded human dentin were compared with those of sound human dentin. Materials and Methods Blocks of cervical dentin were used: sound human dentin (n=10), human dentin with erosive lesions (n=10), and bovine dentin (n=30). Twenty bovine blocks were subjected to either of two erosion protocols (n=10/protocol). In the first protocol, samples were demineralized using HCl-pepsin solution, then treated with trypsin solution. In the second protocol, samples were demineralized with 2% citric acid. Toothbrushing was performed in both protocols using a toothbrushing machine (15 s with a 150 g load). Ten bovine dentin blocks were not subjected to any erosive treatment. All samples of bovine and human dentin were analyzed to obtain Martens hardness values (MH), elastic modulus (Eit*) and surface gloss. One-way ANOVA and Tukey's test were performed to analyze the data (α=0.05). Results Sound human and eroded human dentin groups showed similar MH and Eit* values (p>0.05); however, sound human dentin showed a higher surface gloss value when compared to eroded human dentin (p<0.05). Sound bovine dentin and HCl-pepsin-treated bovine dentin treatments resulted in similar values for both MH and Eit* (p>0.05), but HCl-pepsin-treated bovine dentin and citric acid-treated bovine dentin resulted in lower surface gloss than sound bovine dentin (p<0.05). Conclusions The HCl-pepsin protocol modified bovine dentin properties that could be similar to those that occur on human dentin surfaces with erosive lesions.

Abstract Objective This prospective, randomized, split-mouth clinical trial evaluated the clinical performance of conventional glass ionomer cement (GIC; Riva Self-Cure, SDI), supplied in capsules or in powder/liquid kits and placed in Class I cavities in permanent molars by the Atraumatic Restorative Treatment (ART) approach. Material and Methods A total of 80 restorations were randomly placed in 40 patients aged 11-15 years. Each patient received one restoration with each type of GIC. The restorations were evaluated after periods of 15 days (baseline), 6 months, and 1 year, according to ART criteria. Wilcoxon matched pairs, multivariate logistic regression, and Gehan-Wilcoxon tests were used for statistical analysis. Results Patients were evaluated after 15 days (n=40), 6 months (n=34), and 1 year (n=29). Encapsulated GICs showed significantly superior clinical performance compared with hand-mixed GICs at baseline (p=0.017), 6 months (p=0.001), and 1 year (p=0.026). For hand-mixed GIC, a statistically significant difference was only observed over the period of baseline to 1 year (p=0.001). Encapsulated GIC presented statistically significant differences for the following periods: 6 months to 1 year (p=0.028) and baseline to 1 year (p=0.002). Encapsulated GIC presented superior cumulative survival rate than hand-mixed GIC over one year. Importantly, both GICs exhibited decreased survival over time. Conclusions Encapsulated GIC promoted better ART performance, with an annual failure rate of 24%; in contrast, hand-mixed GIC demonstrated a failure rate of 42%.

Resumo Este estudo teve como objetivo avaliar a penetração trans-amelodentinária do peróxido de hidrogênio (H2O2) aplicados em dentes bovinos pigmentados com chá preto em diferentes intensidades. Divisão dos grupos: AD em água destilada; CP100 em uma infusão de 1,6 g de chá preto para 100 mL de água destilada; CP10 em uma infusão de 1,6 g de chá preto para 10 mL de água destilada. Todos os grupos foram imersos por 6 dias. Para quantificar a penetração de H2O2, as amostras foram colocadas em câmaras pulpares artificiais (CPAs) e submetidas a um tratamento clareador com PH a 38%, uma vez por semana durante 3 semanas. Após o tratamento clareador, a solução tampão de acetato das CPAs com a enzima da peroxidase, foi avaliada num espectrofotômetro de reflexão. A penetração trans-amelodentinária de PH e os valores de L* obtidos em T1, T2 e T3 foram submetidos ao teste estatístico de Kruskal-Wallis e Friedman. Em T1, a difusão de H2O2 no AD foi mais elevada do que em CP100 e CP10. Nos outros tempos de avaliação, os valores de penetração no CP100 e CP10 aumentaram e permaneceram semelhantes. Os valores L* aumentaram significativamente em todos os grupos no T1. No T2, os valores L* foram maiores no AD e os valores em CP100 e CP10 foram semelhantes entre si. No último tempo, o CP10 apresentou os menores valores de L*. Diferentes níveis de pigmentação não afetaram a penetração de H2O2 através do esmalte e dentina e o agente de clareador foi eficaz na alteração cromática.

Abastract This study aimed to evaluate the transenamel and transdentinal penetration of hydrogen peroxide (H202) applied to bovine teeth pigmented with black tea at different intensities. The following groups were formed DW: immersion in distilled water; BT100: immersion in an infusion of 1.6 g of black tea per 100 mL distilled water; BT10: immersion in an infusion of 1.6 g black tea per 10 mL distilled water. All groups were immersed for 6 days. To quantify the penetration of H202, the specimens were placed in artificial pulp chambers (APCs) and subjected to bleaching treatment with 38% H2O2 once per week for 3 weeks. After bleaching treatment, the acetate buffer solution of APCs with peroxidase enzyme was evaluated in a reflection spectrophotometer. The transenamel and transdentinal penetration of H2O2 and the L* values obtained at T1, T2 and T3 were subjected to Kruskal-Wallis and Friedman statistical tests. At T1, the H2O2 diffusion in DW was higher than that in BT100 and BT10. At the other evaluation times, the penetration values in BT100 and BT10 increased and remained similar. The L* values increased significantly in all groups at T1. At T2, the L* values were higher in DW, while the values in BT100 and BT10 were similar to each other. At the end of the experiment, BT10 showed the lowest L* values. The pigmentation level did not affect the penetration of H2O2 through the enamel and dentin and the bleaching agent effectively changed the color of the teeth.

Superficial irregularities and certain intrinsic stains on the dental enamel surfaces can be resolved by enamel microabrasion, however, treatment for such defects need to be confined to the outermost regions of the enamel surface. Dental bleaching and resin-based composite repair are also often useful for certain situations for tooth color corrections. This article presented and discussed the indications and limitations of enamel microabrasion treatment. Three case reports treated by enamel microabrasion were also presented after 11, 20 and 23 years of follow-ups.

This case report describes the Indirect Pulp Treatment (IPT) of deep caries lesion in a permanent molar. A 16-year-old male patient reported discomfort associated with thermal stimulation on the permanent mandibular left first molar. The radiographs revealed a deep distal caries lesion, very close to the pulp, absence of radiolucencies in the periapical region, and absence of periodontal space thickening. Pulp sensitivity was confirmed by thermal pulp vitality tests. Based on the main complaint and the clinical and radiographic examinations, the treatment plan was established to preserve pulp vitality. Clinical procedures consisted of removing the infected dentin and lining the caries-affected dentin with calcium hydroxide paste. The tooth was provisionally sealed for approximately 60 days. After this period, tooth vitality was confirmed, the remaining carious dentin was removed, and the tooth was restored. At 4-year follow-up, no clinical or radiographic pathological findings were found.

The aim of this study was to evaluate the teaching of the Atraumatic Restorative Treatment (ART) approach in Brazilian dental schools. MATERIALS AND METHODS: A questionnaire on this subject was sent to Pediatric Dentistry, Operative Dentistry and Public Health Dentistry professors. The questions approached the followig subjects: the method used to teach ART, the time spent on its teaching, under which discipline it is taught, for how many years ART has been taught and its effect on the DMFT index. RESULTS: A total of 70 out of 202 dental schools returned the questionnaire. The ART approach is taught in the majority of the Brazilian dental schools (96.3%), and in most of these schools it is taught both in theory and in clinical practice (62.9%). The majority (35.3%) of professors teach ART for 8 hours, and most often as part of the Pediatric Dentistry discipline (67.6%). It has been taught for the last 7 to 10 years in 34.3% of dental schools. Most professors did not observe a change in the DMFT index with this approach. There is a diversity in the teaching of ART in Brazil in terms of the number of hours spent, the teaching method (theory and practice), and the disciplines involved in its teaching. CONCLUSIONS: It is necessary to address the training of professors in the ART approach for the whole country. An educational model is proposed whereby a standard ART module features as part of other preventive and restorative caries care educational modules. This will facilitate and standardize the introduction and adoption of the ART approach in undergraduate education in Brazil.

The aim of this study was to assess the influence of ultrasonic wave propagation on the compressive (CS) and diametral tensile (DTS) strengths of glass ionomer cements (GICs). Three variables were evaluated: conventional GICs, ultrasonic excitation and storage time (1 hour, 24 hours and 7 days). Bovine teeth molds were used for simulating a clinical ultrasonic excitation. The data were submitted to three-way ANOVA and Tukey tests (P < 0.05). All the tested conventional GICs presented an increase in strength from 1 hour to 7 days for CS and DTS. Ultrasonic excitation resulted in a statistically significant increase in the CS, but showed no statistically significant difference in the DTS. Regardless the GICs tested the increase in strength was maturation time-dependent for all groups.

Comparou-se a Resistência à Compressão (RC) e à Tração Diametral (TD) de um cimento de ionômero de vidro de alta viscosidade [Fuji IX (GC Corporation)] e de dois novos cimentos Brasileiros [Vitro Molar (DFL) e Bioglass R (Biodinamica)], recentemente lançados no mercado, ambos indicados para o Tratamento Restaurador Atraumático (ART), em diferentes períodos de tempo. Foram confeccionados quinze corpos-de-prova com 6,0 mm de diâmetro x 3,0 mm de altura para o teste de TD e quinze com 6,0 mm de diâmetro e 12,0 mm de altura para o teste de RC, para cada ionômero a ser testado. Os corpos-de-prova foram armazenados em recipientes plásticos, com água deionizada, e mantidos em estufa a 37ºC e 100% de umidade, até a realização dos testes. Cinco corpos-de-prova de cada material foram submetidos aos testes de TD e RC em cada período de tempo: 1-hora, 24-horas e 7-dias, em uma máquina de testes universal (EMIC - DL 500) a uma velocidade de 1,0 mm/min para RC e 0,5mm/min para TD. Os dados obtidos foram submetidos aos testes ANOVA a dois critérios e Tukey (á=0,05). Os valores médios de RC e TD variaram de 42,03 a 155.47 MPa e de 5,54 a 13,72 MPa, respectivamente para os períodos analisados. O Fuji IX e o Vitro Molar não apresentaram diferenças em relação aos testes de RC e TD, exceto para RC no período de 1-hora. O Bioglass R apresentou os menores valores de RC dos cimentos testados. Na TD o Bioglass R não apresentou diferença em relação aos outros cimentos testados no período de 1-hora e não foi diferente do Vitro-Molar nos períodos de 24-horas e 7-dias. Mais estudos são necessários para avaliar outras propriedades mecânicas desses novos cimentos de ionômero de vidro brasileiros, tais como: tenacidade e desgaste, bem como composição química e biocompatibilidade.

The aim of this study was to compare, in different periods of time, the compressive and diametral tensile strength of a traditional high viscous glass ionomer cement: Fuji IX (GC Corporation), with two new Brazilian GIC's: Vitro-Molar (DFL) and Bioglass R (Biodinamica), all indicated for the Atraumatic Restorative Treatment (ART) technique. Fifteen disk specimens (6.0mm diameter x 3.0mm height) for the diametral tensile strength (DTS) test and fifteen cylindrical specimens (6.0mm diameter x 12.0mm height) for the compressive strength (CS) test were made of each GIC. Specimens were stored in deionized water at 37º C and 100% of humidity in a stove until testing. Five specimens of each GIC were submitted to CS and DTS test in each period, namely 1 hour, 24 hours and 7 days. The specimens were tested in a testing machine (Emic) at a crosshead speed of 1.0mm/min for CS and 0.5mm/min for the DTS test until failure occurred. The data were submitted to two-way ANOVA and Tukey tests (alpha=0.05). The mean CS values ranged from 42.03 to 155.47MPa and means DTS from 5.54 to 13.72 MPa, with test periods from 1h to 7 days. The CS and DTS tests showed no statistically significant difference between Fuji IX and Vitro Molar, except for CS test at 1-hour period. Bioglass R had lowest mean value for CS of the cements tested. In DTS test Bioglass R presented no statistically significant differences when compared with all others tested GICs at 1-hour period and Bioglass R presented no difference at 24-hour and 7-day periods when compared to Vitro-Molar. Further studies to investigate other physical properties such as fracture toughness and wear resistance, as well as chemical composition and biocompatibility, are now needed to better understand the properties of these new Brazilian GIC's.