Resumen Este estudio evaluó propiedades físicas y estructurales, como el grado de conversión (DC), la dureza Vickers (VHN) y la resistencia a la compresión (CS), de tres nuevos compósitos a base de resina de curado dual tipo bulk (RBC; ACTIVA , HyperFIL y Fill-Up) y los comparó con los de una resina compuesta convencional (Filtek Z250) en tres profundidades clínicamente relevantes. Se prepararon muestras (n=180) en tres profundidades (2,4 y 6mm). Se realizaron análisis de espectroscopia infrarroja por transformada de Fourier (FTIR) y pruebas VHN y CS. El valor de DC se calculó considerando el cambio relativo en los picos alifáticos C=C. Las superficies fracturadas de muestras representativas se caracterizaron mediante microscopía electrónica de barrido (MEB). Los datos se evaluaron estadísticamente mediante análisis de varianza de dos vías y pruebas post hoc de Bonferroni (p<0,05). De acuerdo con los resultados de VHN, Filtek Z250 mostró la relación de dureza inferior/superior más alta (97,94±1,01) con un espesor de 2mm y ACTIVA mostró la relación de dureza inferior/superior más baja (43,48±5,64) con un espesor de 6mm (p<0,001). De acuerdo con los resultados de FTIR, la DC disminuyó al aumentar el espesor en todos los materiales (p<0,05). Filtek Z250 mostró los valores de CS más altos (301±12,4 MPa) y ACTIVA los más bajos (232±17,2 MPa) a 2mm de espesor (p<0,05). Los valores más bajos de CS se obtuvieron para ACTIVA y los valores más altos para Filtek Z250 para muestras con espesores de 4 y 6mm, respectivamente (p<0,05). Las características estructurales de las resinas compuestas de restauración, como la química; además del tipo y contenido del relleno, y los parámetros operativos (es decir, el espesor del material y las condiciones de curado) afectan en gran medida las reacciones de interacción química y, por lo tanto, los valores de DC, VHN y CS.

Abstract This study evaluated selected structural and physical properties, such as degree of conversion (DC), Vickers hardness (VHN), and compression strength (CS), of three new dual-cure bulk-fill resin-based composites (RBCs; ACTIVA, HyperFIL, and Fill-Up) and compared them to those of a conventional RBC (Filtek Z250) at three clinically relevant depths. Samples (n=180) were prepared in three depths (2,4, and 6mm). Fourier-transform infrared spectroscopy (FTIR) analysis and VHN and CS tests were performed. The DC value was calculated by considering the relative change in the aliphatic C=C peaks. The fractured surfaces of representative samples were characterized using scanning electron microscopy (SEM). Data were statistically evaluated using two-way analysis of variance and post hoc Bonferroni tests (p<0.05). According to the VHN results, Filtek Z250 showed the highest bottom/top hardness ratio (97.94±1.01) at 2mm thickness and ACTIVA showed the lowest bottom/top hardness ratio (43.48±5.64) at 6mm thickness (p<0.001). According to the FTIR results, the DC decreased with increasing thickness in all materials (p<0.05). Filtek Z250 showed the highest (301±12.4 MPa) and ACTIVA exhibited the lowest (232±17.2 MPa) CS values at 2mm thickness (p<0.05). The lowest CS values were obtained for ACTIVA, and the highest values were obtained for Filtek Z250 for samples with thicknesses of 4 and 6mm, respectively (p<0.05). The structural features of restorative composites, such as the resin chemistry and filler type and content, and the operational parameters (i.e., material thickness and curing conditions) strongly affect crosslinking reactions and thus the DC, VHN, and CS values.

ABSTRACT Objective: The main goal of this study was to compare the polymerization degree of bulk-fill giomer resin cured with three different light-curing units (LCUs): a polywave third-generation (Valo); a monowave (DemiUltra: DU); and a second-generation LED (Optima 10: Opt) LCUs by using structural and mechanical properties. Material and methods: Giomer samples of 2 and 4 mm cured with three LCUs were employed in vitro analysis. The degree of curing (DC%) was determined with Fourier-Transform Infrared Spectroscopy (FTIR). Microstructural features were observed with scanning electron microscopy (SEM). Flexural strength (FS), compression strength (CS), elastic modulus and fracturing strain were determined for mechanical properties. Surface microhardness (SMH) values were also measured. Oneway ANOVA, two-way analysis of variance and Tukey multiple comparison tests were used for statistically analyzing the FS and SMH. Results: DC% values were 58.2, 47.6, and 39.7 for the 2 mm samples cured with DU, Opt., and Valo LCUs, respectively. DC% values of the 4 mm samples were 50.4, 44.6, and 38.2 for DU, Opt, and Valo, respectively. SMH values were Valo, Opt<DU at top of the samples; Valo<DU, Opt at 2 mm, and DU, Valo<Opt at 4 mm depth. Giomer samples cured with Opt and DU exhibited higher FS values than Valo. CS values were similar but compressive modulus and fracturing strain (%) varied depending on the curing protocol. Conclusions: Based on the results, it can be concluded that curing device and protocol strongly affect crosslinking reactions and thus DC%, SMH, compressive modulus and strain at break values. Consequently, it can be deduced that curing protocol is possibly the most important parameter for microstructure formation of highly-filled composite restoratives because it may bring some structural defects and physical frailties on restorations due to lower degree of polymerization.

The effect of wood-derived charcoal flour on the water resistance and mechanical properties of wood plastic composite (WPC) panels was investigated. The hot press molded WPC panels were produced from polypropylene (37 wt%) with maleic anhydride-grafted polypropylene (MAPP, 3 wt%) and different mixtures of wood flour and charcoal flour. The amount of charcoal flour was gradually increased up to 60 wt%. The thickness swelling and water absorption of WPC panels considerably decreased with increasing charcoal flour content. The internal bond strength and bending properties of the WPC panels significantly improved with increasing charcoal flour content. This was mainly attributed to the high amount of pores and gaps in the charcoal flour. Melted polypropylene could get into the pores and gaps during the hot press molding, which lead to a better interfacial adhesion between polymer matrix and wood filler. The results showed that the charcoal flour could be partially substituted for the wood flour in the production of WPC panels having higher dimensional stability and internal bond strength.

Objetivo: Comparar os efeitos da vitamina E e 1% da solução de azul de metileno na prevenção de aderências induzidas em ratos. Métodos: Trinta e sete ratos fêmeas Spraque Dawley foram distribuídos em quatro grupos. O primeiro grupo foi mantido como grupo sham. O modelo de aderência foi realizado no corno uterino esquerdo nos outros grupos. As áreas da lesão dos ratos do segundo, terceiro e quarto grupos foram revestidas com 2 ml de solução salina 0,9% (Grupo C), 10 mg de vitamina E (Grupo VE) e solução de azul de metileno 1% (Grupo MB), respectivamente. Resultados: Histopatologicamente, o escore das aderências, infiltração celular mononuclear, edema e fibrose foram mais proeminentes no grupo MB em comparação aos grupos C e VE. Não houve diferença significante entre os grupos na peroxidase da glutatione do tecido (GPx), atividade da catalase (CAT) e o nível de glutation (GSH). Estes parâmetros foram ligeiramente aumentados no grupo com suplemento da VE. A administração da VE e do MB diminuiu significantemente os níveis quando quando comparada ao Grupo C. O nível de malondialdeído no grupo VE foi significantemente mais baixo do que nos grupos sham e C. Conclusão: A administração intraperitoneal da solução de azul de metileno foi mais eficaz de acordo com a vitamina E na prevenção de aderências intra-abdominais no corno uterino de ratos.

Purpose: To compare the effects of vitamin E and 1% methylen blue solutions on prevention of experimentally induced adhesions in rats. Methods: Thirty seven female Spraque Dawley rats were randomized into four groups. First group was kept as sham operated group. An adhesion model was constituted on the left uterine horn of the other groups. The lesion areas of rats from the second, the third and the fourth groups were coated with 2 ml 0.9 % saline solution (C group), 10 mg vitamin E (VE group) and 1% methylen blue solutions (MB group), respectively. Results: Histopathologically, adhesion scores, mononuclear cell infiltration, oedema and fibrosis were more prominent in the MB group compared with C and VE groups. There were no significant differences between the groups in tissue glutathione peroxidase (GPx), catalase (CAT) activities and glutation (GSH) level, these parameters were slightly increased in group with VE supplementation though. The administration of VE and MB significantly decreased NO (P<0.01) levels when compared to the C group. The level of malondialdehyde (MDA) in the VE group was significantly lower (P<0.05) than those of the Sh and C groups. Conclusion: Intraperitoneal methylen blue solutions treatments were more effective according to vitamin E in preventing the formation of intra-abdominal adhesion in a rat uterine horn model.

OBJECTIVES: This study was designed to investigate prevention of contralateral testicular injury with sildenafil citrate after unilateral testicular torsion/detorsion. METHODS: Thirty-seven adult male rats were divided into four groups: sham operated (group 1, n = 7), torsion/detorsion + saline (group 2, n = 10), torsion/detorsion + 0.7 mg of sildenafil citrate (group 3, n = 10) and torsion/detorsion + 1.4 mg of sildenafil citrate (group 4, n = 10). Unilateral testicular torsion was created by rotating the right testis 720º in a clockwise direction for 2 h in other groups, except for group 1, which was served as sham group. After torsion (2 h) and detorsion (2 h) periods, rats were killed. RESULTS: The level of reduced glutathion (GSH) (p<0.05) and the activities of catalase (p<0.01) and glutathione peroxidase (p<0.05) in the contralateral testis from group 2 were significantly lower and nitric oxide (NO) (p<0.05) level in the contralateral testis were significantly higher than those of group 1. Administration of low-dose sildenafil citrate (group 3) prevented the increases in malondialdehyde and NO levels and decreases in glutathione peroxidase activities and GSH values induced by testicular torsion. However, administration of high-dose sildenafil citrate (group 4) had no effect on these testicular parameters (p>0.05). Histopathological changes were detected in groups 2, 3 and 4. CONCLUSION: These results suggest that biochemically and histologically torsion/detorsion injury occurs in the contralateral testis following 2-h torsion and 2-h detorsion and that administration of low-dose sildenafil citrate before detorsion prevents ischemia/reperfusion cellular damage in testicular tissue.

OBJECTIVE: This study compares the efficacies of vitamin E and selenium, both individually and in combination, for the prevention of postoperative intra-abdominal adhesions in rats. METHODS: Forty-seven female rats were divided into five groups. The sham animals (S group, n = 7) were given only laparotomies and intraperitoneally received 0.9% NaCl (2 ml). In the 40 other rats, abrasions of the left uterine horn were performed, followed by intraperitoneal administration of either 2 ml 0.9% NaCl (C group), 10 mg vitamin E (vitamin E group), 0.2 mg/kg selenium (Se group) or 10 mg vitamin E with 0.2 mg/kg selenium (vitamin E + Se group), with 10 animals in each treatment group. RESULTS: Adhesion formation was significantly reduced in animals in the Se and vitamin E + Se groups (p<0.05). Tissue catalase and glutathione peroxidase activities did not significantly differ between the groups. However, catalase and glutathione peroxidase activities and reduced glutathione levels were slightly increased in the vitamin E, Se and vitamin E + Se groups. In the vitamin E group, malondialdehyde concentrations were significantly lower than in the C group (p<0.05), but no significant differences were present among the S, C, Se and vitamin E + Se groups. Levels of nitric oxide were significantly higher in the C group than in the other groups (p<0.01). CONCLUSION: Intraperitoneal administration of selenium or combined vitamin E and selenium appears to be effective in preventing intra-abdominal adhesion formation in rat models through the reduction of lipid peroxidation products.