ABSTRACT: This study examined the salivary pH, salivary lactate, and salivary IL-1 β responses from a high-intensity intermittent running test, and the influence of hygiene oral status on these biomarkers in elite adolescent basketball players. Forty-six adolescent players participated. Saliva sampling was taken before and 3 min after a high-intensity exercise (Yo-Yo Intermittent Recovery Test Level 1; Yo-Yo IR1). In order to quantify and classify the oral hygiene level, the athletes were submitted to a dental examination, and an adapted Simplified Oral Hygiene Index was applied. After the dental examination, the whole group was divided into good oral hygiene group (GHG) and poor oral hygiene group (PHG). The results of a two- way analysis of variance showed a significant interaction effect (P = 0.0003), group effect (P < 0.0001), and time effect (pre to post Yo-yo IR1; P < 0.0001) for salivary pH and for salivary lactate (interaction effect, P = 0.008; group effect, P < 0.000 1; time effect, P < 0.0001) with a lower salivary pH and a higher salivary lactate at pre and post-Yo-Yo IR1 for PHG, but no difference was observed for IL-1β. The data demonstrated that the high-intensity exercise led to a significant change in salivary pH and salivary lactate concentration of the basketball players, and that the oral hygiene status influenced these responses, with a greater change for those players showing a poor oral hygiene.

RESUMEN: Este estudio examinó las respuestas de pH salival, lactato salival e IL-1β salival de una prueba de carrera intermitente de alta intensidad, y la influencia del estado de higiene oral en los biomarcadores en jugadores adolescentes de baloncesto de élite. En el análisis participaron 46 jugadores adolescentes. Se tomó una muestra de saliva antes y 3 minutos después de un ejercicio de alta intensidad (Prueba de recuperación intermitente Yo-Yo Nivel 1; Yo-Yo IR1). Para cuantificar y clasificar el nivel de higiene oral, los atletas fueron sometidos a un examen dental y se aplicó un índice adaptado de higiene oral simplificado. Después del examen dental, el grupo se dividió en un grupo de buena higiene oral (GHG) y un grupo de mala higiene oral (PHG). Los resultados de un análisis de varianza mostraron un efecto de interacción significativo (P = 0.0003), efecto de grupo (P<0.0001) y efecto de tiempo (antes y después de Yo-yo IR1; P <0.0001) para el pH salival y para lactato salival (efecto de interacción, P = 0.008; efecto de grupo, P <0.0001; efecto de tiempo, P <0.0001) con pH salival más bajo y lactato salival más alto en IR1 pre y post YoY para PHG, pero no se observó una diferencia para IL-1β. Los datos demostraron que el ejercicio de alta intensidad genera un cambio significativo en el pH salival y el lactato de los jugadores de baloncesto, y que el estado de higiene oral influyó en estas respuestas, con un cambio mayor para aquellos jugadores que mostraron una mala higiene oral.

ABSTRACT: Dietary supplements are being consumed with an increasingly high frequency among sports practitioners, whether at professional and/or amateur level. The supplements contain some nutritional properties in their composition, so they can dissolute the hydroxyapatite crystals of the enamel and favor the process of dental corrosion. The objective was to measure the corrosive power of protein-based supplementation (Whey Protein), under conditions that resemble the use of the supplement by the athletes, increasing the ecological validity of the study. The teeth of the test group (TG) were placed in contact with the Whey protein solution and then exposed to artificial saliva. And the teeth of the control group (CG) were exposed only to artificial saliva. The analysis occurred in natural healthy molar teeth, so that each tooth of the TG was immersed in 50 mL of supplement for 1.5 minutes and then placed in contact with the artificial saliva for 30 seconds. The same procedure was performed 5 times a day for 30, 60, 90, 120, 150 and 180 days. Each group, in its time (TG0 to TG180), underwent analysis of superficial roughness with the aid of optical profilometer (Talysurf CCI®, 3D model). The control group (CG) did not change its superficial roughness. Half of the teeth of the test group (TG) suffered loss of enamel surface. The values, in micrometers, of surface loss of the TG samples were 1.21; 2.1; 2.0; 1.04; 0.97; 0.8; 0.53; 1.14; 1.9; 2.0; 1.66; 1.80. The dietary supplement (Whey protein®) may be a potential cause of the dental corrosion process, considering the demineralization of hydroxyapatite that occurs along with the surface enamel loss.

RESUMEN: Los suplementos dietéticos se consumen con una frecuencia cada vez más alta entre los practicantes de deportes, sea a nivel profesional y / o aficionado. Los suplementos contienen algunas propiedades nutricionales en su composición, por lo que pueden disolver los cristales de hidroxiapatita del esmalte y favorecer el proceso de corrosión dental. El objetivo fue medir el poder corrosivo de la suplementación a base de proteínas (proteína de suero), en condiciones que se asemejan al uso del suplemento por parte de los atletas, aumentando la validez ecológica del estudio. Los dientes del grupo de prueba (TG) se pusieron en contacto con la solución de proteína de suero y luego se expusieron a saliva artificial. Y los dientes del grupo de control (CG) estuvieron expuestos solo a saliva artificial. El análisis se realizó en dientes molares sanos naturales, cada diente del TG se sumergió en 50 ml de suplemento durante 1,5 minutos y luego se puso en contacto con la saliva artificial durante 30 segundos. El mismo procedimiento se realizó 5 veces al día durante 30, 60, 90, 120, 150 y 180 días. Cada grupo, en su momento (TG0 a TG180), se sometió a un análisis de rugosidad superficial con la ayuda de un perfilómetro óptico (Talysurf CCI®, modelo 3D). El grupo de control (CG) no cambió su rugosidad superficial. La mitad de los dientes del grupo de prueba (TG) sufrieron pérdida de la superficie del esmalte. Los valores, en micrómetros, de pérdida de superficie de las muestras de TG fueron 1.21; 2.1; 2,0; 1.04; 0,97; 0.8; 0,53; 1.14; 1.9; 2,0; 1,66; 1.80. El suplemento dietético (Whey protein®) puede ser una causa potencial del proceso de corrosión dental, considerando la desmineralización de la hidroxiapatita que ocurre junto con la pérdida de esmalte superficial.

ABSTRACT: The aim of the study was to determine the possibility of using panoramic X-ray as an auxiliary tool for the identification of talent in young athletes using the physical body growth indicator. Thirty three radiographs were used of athletes aged 13 to 15 years. Analysis was performed using the Eklof and Ringertz method. Dental age (40 %) came the closest to chronological age. Dental age determined in this study proved to be the most effective radiographic method for the determination of bone maturity for use in the identification of talent through imaging exams. This method was also the simplest and can be performed by the dentist of a sports club without exposing athletes to unnecessary radiation.

RESUMEN: El objetivo del estudio consistió en determinar la posibilidad de usar radiografía panorámica como herramienta auxiliar para la identificación de talentos en los atletas usando el indicador de crecimiento del cuerpo físico. Fueron utilizadas 33 radiografías de atletas, de entre 13 a 15 años. Se realizó un análisis de la aplicación utilizando el método de Eklof y Ringertz. Se encontró que la edad dentaria (40 %) se aproximó a la edad cronológica. La edad dental utilizada en este estudio demostró ser el método radiográfico más efectivo para la determinación de la madurez ósea para su uso en la identificación del talento a través de exámenes de imágenes. Este método también fue el más simple y puede ser realizado por el dentista de un club deportivo sin exponer a los atletas a radiaciones innecesarias.

ABSTRACT: There has been little discussion about the quality of life of patients with maxillary defects. This article evaluates the issues related to the condition. We performed a cross-sectional study of patients with maxillary defects from referral centers in Brazil. To avoid subject burden, a questionnaire was developed, based on questions from seven instruments, which dealt with domains and conclusions that were similar to those from other studies. The predictor variable was the patients’ score for each question. The outcome measure was the presence of the best-ranked items on the questionnaire as the impact factor. Six experts assessed these items and suggested which questions to include or exclude. Patients scored each item according to its occurrence and importance. Descriptive statistics and the items’ rank according to the impact factor were computed to determine whether there is a comprehensive instrument available. Thirteen patients and six professionals were included in this study. The patients’ age ranged from 24 to 72 years (mean (standard deviation, SD), 50.41 (14.46) years). We obtained a 60-item instrument from the selected questionnaires and subject interviews. Only 12 (37.5 %) out of the 32 best-rated items were verified by the existing instruments, two (6.25 %) were suggested by professionals and 18 (56.25 %) were conclusions from other studies. To the best of our knowledge, this is the first study to provide many features related to the quality of life in patients with maxillary defects.

RESUMEN: Existe escasa discusión en la literatura sobre la calidad de vida de los pacientes con defectos maxilares. Este artículo evalúa los problemas relacionados con esta condición. Realizamos un estudio transversal de pacientes con defectos maxilares de centros de referencia en Brasil. Se desarrolló un cuestionario basado en preguntas de siete instrumentos, que trataba sobre dominios y conclusiones similares a las de otros estudios. La variable de estimación fue la puntuación de los pacientes para cada pregunta. La medida de resultado fue la presencia de los elementos mejor clasificados en el cuestionario como factor de impacto. Seis expertos evaluaron estos ítems y sugirieron qué preguntas incluir o excluir. Los pacientes puntuaron cada ítem según su ocurrencia e importancia. Se calcularon las estadísticas descriptivas y la clasificación de los ítems según el factor de impacto, para determinar si existe un instrumento completo. Trece pacientes y seis profesionales fueron incluidos en este estudio. La edad de los pacientes osciló entre 24 y 72 años [media (desviación estándar), 50,41 (14,46) años]. Obtuvimos un instrumento de 60 ítems de los cuestionarios y entrevistas de temas seleccionados. Solo 12 (37,5 %) de los 32 ítems mejor calificados se verificaron de acuerdo a los instrumentos existentes, dos (6,25 %) fueron sugeridos por profesionales y 18 (56,25 %) fueron conclusiones de otros estudios. De acuerdo a nuestro conocimiento, este es el primer estudio que proporciona características relacionadas con la calidad de vida en pacientes con defectos maxilares.

Abstract Objective: To evaluate the inclusion capacity and bactericidal efficiency of diallyl dimethyl ammonium chloride (PDADMAC) diluted in tetrahydrofuran (THF) upon inclusion in the medical grade silicone polymer structure. Material and Methods: It was diluted the PDADMAC in THF at the concentration of 4wt%. It was included in the silicon paste during its vulcanization process. The contact angle measurements were performed to evaluate whether the biocide inclusion into the silicon paste was successful. All samples were sterilized with gamma radiation at 25KGy-dosage prior to the microbiological tests. Microbiological testing strictly followed the Antibacterial products - Test for antibacterial activity and efficacy JIS Z 2801: 201010 and the used of specific bacteria, as Staphylococcus aureus ATCC 6538P and Escherichia coli ATCC 8739. Results: The results showed that PDADMAC, when dissolved in THF at 4wt%, displayed good incorporation in medical silicone and a broad-spectrum antibacterial response. The results of the tests using Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P showed that the silicone with no biocide addition did not present antibacterial activity. In contrast, the experimental group plus 2 mL of PDADMAC would have an ideal antibacterial response. Conclusion: Medical grade silicone can be used as a material with antibacterial properties, since it has been able to keep PDADMAC compound attached to its structure, thus acquiring antimicrobial property.

Sports Dentistry (SD) acts in the prevention, maintenance and treatment of oral and facial injuries, as well as the collection and dissemination of information on dental trauma, beyond stimulus to research. Establishes as a duty for the dentist detect problems related to the athlete’s stomatognathic system. This essay is based on the provided data from the literature related to SD, including definition, practice areas and research fields. To discuss the data, six areas were categorized: shares in sports dentistry; oral health of athlete; sports-related dental implications; dental-facial trauma; face shields; and mouthguards. The analyzed data show that the SD is still an underexplored field of action by dentists, but it is expanding, despite not being recognized specialty by the Federal Council of Dentistry, but the Brazilian Academy of Sports Dentistry has been created with a mission to show the real importance of Dentistry in sport. The dentist should be part of the group of professionals associated with the athlete to perform periodic checks in order to ensure oral health which may contribute to athletes´performance. When impact occurs, however, it would be possible reduce the severity of the impact related to injuries, by using helmets, masks, goggles, face shields and mouthguard. Additionally, it is imperative that dentists, sports coaching, athletes, and professional who work with athletes be aware of the benefits of incorporating SD as an important academic and professional subject.

The aim of this study was to assess the prevalence of caries in children with cleft lip and∕or palate aged 6-36 months of life. This study was conducted at the University of São Paulo School of Dentistry, Brazil. A total of 143 children were selected (73 male, 70 female), all of whom had at least two erupted teeth. The children were distributed as follows: 88 had cleft lip and palate, 35 had cleft palate, 20 had cleft lip. Dental caries disease was diagnosed according to criteria set by the World Health Organization. It was observed that 18.9% of the study children had caries. No correlation between prevalence of caries and gender or type of cleft was observed. Mean dmf-t was 0.47. The prevalence of caries was higher in the upper arch, and the most affected tooth was the central incisor (p = 0.001). Children with cleft lip and∕or palate did not have high caries indices.

The dentist can offer athletes improvement in their physical performance through the maintenance of oral health, preventing and treating any and all changes in the stomatognathic system, such as dental malocclusions, that compromise the athletes' performance. The objective of this study is to research the presence of dental malocclusions in athletes of the category between 13 and 20 years of age, from the São Paulo Football Club. 84 athletes participated in this study, dealing with the following topics: molar relation (Angle's classification); presence of overbite; underbite; overcrowding; abnormal spacing; open bite; and anterior, posterior, bilateral and unilateral crossbite; midline deviation and facial type (mesofacial, brachyfacial and dolichofacial). Only one table was made, showing percentages. In regard to Angle's molar relation, 89% are in Class I, 8% in Class II, 3% Class III, 9% of the athletes had overbite, 4% had underbite, 13% had overcrowding and 21% had abnormal spacing. In regard to the bite, 11% presented anterior open bite. In regard to crossbite, 7% presented unilateral crossbite on the right side and 2% on the left side; 5% presented posterior crossbite and 4% anterior crossbite. In regard to midline deviations, 4% presented deviation in the maxilla and 33% in the mandible. In regard to facial type: 39% are dolichofacial, 4% brachyfacial and 57% mesofacial. Based on the results shown, proposals for the implementation of dental, phoniatric, and Ear, Nose and Throat (ENT) practices are already being discussed with the multidisciplinary team of the club involved.

A fiel reprodução da íris do olho remanescente através da pintura na confecção da prótese ocular é fator fundamental no resultado estético e na dissimulação da perda para os pacientes afetados. Decidiu-se, então, avaliar a estabilidade das cores da tinta acrílica utilizada na pintura da mesma, sob a ação de dois fatores: a temperatura do ciclo de polimerização da resina acrílica e a incidência da luz solar, principal agente de fotodegradação que compromete a longevidade das próteses oculares, através de teste de envelhecimento acelerado. Foram assim, confeccionados corpos de prova simulando a íris protética, nas cores azul, amarelo, preto, marrom e verde, submetidos a uma leitura colorimétrica inicial e outra após as condições térmicas do ciclo de polimerização. Posteriormente os mesmos foram testados durante três semanas através de ensaio de envelhecimento acelerado artificialmente com radiação ultravioleta A e leituras colorimétricas semanais. Através dos valores da alteração de cor (DE*) foi obtida uma média para as quatro amostras pintadas com a mesma cor e os valores resultantes foram submetidos à análise estatística. Os testes de Levine e t de Student foram utilizados para analisar a influência da temperatura do processo de polimerização na estabilidade de cada cor utilizada na fabricação das próteses. O teste de Friedman para três amostras dependentes foi usado para analisar a degradação de cor em função do tempo. O nível de significância foi de 0,05 para todas as análises. Após a ação da temperatura do ciclo de polimerização, observou-se que somente na cor amarelo ocorreu alteração acima do nível clinicamente aceitável (p<0,05). Após o ensaio de envelhecimento, ocorreram diferenças estatisticamente significantes em função do tempo nas cores verde, marrom, preto e azul. A variação de cor ocorreu em níveis considerados clinicamente aceitáveis para as cores marrom e preto; levemente acima dos níveis clinicamente aceitáveis para a cor verde; e em níveis elevados, inviáveis clinicamente para a cor azul. Na cor amarelo não houve diferenças estatisticamente significantes (p>0,05), com alteração apenas um pouco acima do limite considerado clinicamente aceitável. Em conslusão: 1. Somente a cor amarelo apresentou alteração acima dos níveis clinicamente aceitáveis após o ciclo de polimerização; 2. Após o envelhecimento artificial, não houve alterações na cor amarelo acima dos níveis clinicamente aceitáveis; 3. Para a cor verde, a degradação foi significante e um pouco acima dos níveis clinicamente aceitáveis; 4. As cores preto, marrom e azul apresentaram diferenças significantes em função do tempo; as alterações das cores marrom e preto foram em níveis clinicamente aceitáveis, enquanto a cor azul apresentou um elevado índice de degradação de cor em todo tempo.

Accurate iris reproduction in the fabrication of ocular prosthesis in order to match the remaining eye is a key factor to mask the loss and achieve an esthetic outcome for anophthalmic patients. This study evaluated the stability of acrylic paints used for replicating iris color in ocular prostheses by the analysis of two factors: the temperature of the acrylic resin polymerization cycle during prosthesis fabrication and the incidence of sun light, which is the main photodegrading agent undermining the longevity of ocular prostheses. An accelerated aging assay was used for both analyses. Specimens simulating the prosthetic iris in the colors blue, yellow, black, brown and green were fabricated, and were submitted to a colorimetric reading before and after undergoing the thermal conditions of acrylic resin polymerization. Next, the specimens were submitted to an artificial accelerated aging assay with ultraviolet radiation A and weekly colorimetric readings during a 3-week period. The color change (??*) values for the four specimens painted with the same color paint were averaged and the resulting values were considered for statistical analysis. Levine's test and Student's t-test were used to analyze the influence of the temperature of the polymerization cycle during prosthesis fabrication on the color stability of each acrylic resin paint. Friedman's test for three dependent samples was used for analysis of color photodegradation as function of time. Significance level was set at 0.05 for all analyses. It was observed that, after the action of the temperature of the polymerization cycle, alteration above clinically acceptable level of ??*> 3.3 was observed only for the yellow color. After the accelerated aging assay, there were statistically significant differences (p<0.05) as a function of time in the green, brown, black and blue colors. Changes were clinically acceptable for the brown and black colors; slightly above the clinically acceptable limit for the green color; and significantly high and impracticable from a clinical standpoint for the blue color. There was no statistically significant differences (p>0.05) for the yellow color, which presented color change only a little above the clinically acceptable limit. In conclusion: 1. Only the yellow color presented alterations above the clinically acceptable levels after the polymerization cycle; 2. After accelerated aging, there was no changes in the yellow color above the clinically acceptable levels; 3. For the green color, degradation was significant and slightly above the clinically acceptable levels; 4. The black, brown and blue colors presented significant alterations as function of time; the alterations of the brown and black colors were within acceptable clinical levels, while the blue color presented a more accentuated degradation over time.

Um modelo experimental de arco dentário, obtido em epóxi, acoplado a uma máquina universal de ensaios Kratos, foi utilizado para estudar o comportamento mecânico do copolímero de etileno e acetato de vinila (EVA), na forma de protetor bucal para esporte e placa plana. As seguintes variáveis foram observadas: espessura (lâminas de 3 e 4 mm), temperatura (ambiente e bucal) e presença ou ausência de saliva artificial. As propriedades mecânicas do EVA, foram testadas ao esforço compressivo: energia aparente absorvida (J.mm-1), tensão máxima (N.mm-1), deslocamento máximo (mm) e força máxima (N). Dados foram registrados e modelados matematicamente. Considerando a energia aparente absorvida, tensão máxima e força máxima, verificou-se que com o aumento da espessura dos protetores bucais houve melhores resultados de dissipação de forças compressivas e seu redirecionamento para o sistema e diversas regiões do arco dental. Com a presença de saliva e temperatura próxima a bucal o material respondeu positivamente a essas alterações aumentando sua ductibilidade apresentando assim melhora em sua resposta mecânica. Com respeito ao deslocamento máximo observou-se que houve melhor acomodação da oclusão quando em condições próximas à bucal. Conclue-se que o EVA provou ser um material adequado para a confecção de protetores bucais para esporte e placas interoclusais.O EVA mostrou melhores resultados na dissipação de forças demonstrando sua grande capacidade amortecedora e grande potencial de proteção.

In the present investigation, an experimental dental arch model fabricated in epoxy was assayed in Kratos universal testing machine to study the mechanical behavior of ethylene and vinyl acetate copolymer (EVA) in the form of mouthguard for sports and flat plate. The following variables were considered: thickness (3 and 4-mm plates), temperature (room and mouth temperature) and presence/absence of artificial saliva. Mechanical properties of EVA were tested under compressive strength: apparent absorbed energy (J.mm-1), maximum tension (N.mm-1), maximum dislocation (mm) and maximum strength (N). Data were recorded and modeled mathematically. Regarding the absorbed energy, maximum tension and maximum force, it was verified that the higher the thickness of the mouthguards, the better the results of force dissipation and redirection to the system and to several regions of the dental arch. In the presence of saliva and close to mouth temperature, the material responded positively to these alterations, resenting increased ductibility as well as improved mechanical responses. Regarding maximum dislocation, it was observed a better accommodation of the occlusion under conditions that simulate those observed in the oral environment. In conclusion, EVA proved to be an adequate material for fabrication of mouthguards and interocclusal splints. In addition, EVA showed good results in force dissipation and demonstrated a shock-absorbing capacity and a great protection potential.

O objetivo desta investigação foi estudar a biocompatibilidade de materiais aloplásticos, que pudessem ser usados como próteses internas. Comparamos em nosso estudo as reações histológicas de dois materiais: silicona e a hidroxiapatita. Usando ratas da cepa Wistar, preparamos corpos de prova de silicona e de silicona revestida com hidroxiapatita e fizemos inclusões subcutâneas no dorso das ratas. Os cortes histológicos foram analisados após um período de 7, 14, 21, 30, 60, 90 e 120 dias e demonstraram que as inclusões das siliconas revestidas com hidroxiapatita são mais biocompatíveis do que as de silicona pura, já que não formam cápsula fibrosa. Estes resultados mostram que podemos indicar peças de silicona revestidas com hidroxiapatita para prótese interna.

This study investigated the biocompatibility of alloplastic materials as internal prostheses. We compared the histologic reactions for two different materials: silicone and hydroxyapatite. We prepared test samples of silicone and silicone with hydroxyapatite coating using "wistar" rats. We did subcutaneous implantations on the back side of rats in both samples. Histological specimens were analyzed after 4 months of observation, and it became evident that silicone with hydroxyapatite impactions did not create any fiberform capsules. These results suggest that we can indicate silicone with hydroxyapatite coating as an internal prosthesis.

Fez-se um estudo comparativo entre técnicas de moldagem visando a confecção de uma prótese ocular. Trabalhando-se com vinte pacientes, confeccionaram-se para cada um deles três próteses, obtidas através de moldagens pelas seguintes técnicas: 1) injeção; 2) moldeira de estoque; 3) moldeira individual. O grau de mobilidade das três próteses foi medido através de um aparelho construído pelos autores que substitui o sinoptóforo. Os resultados obtidos analisados estatisticamente indicam que o método de injeção foi o melhor na amostra estudada

The authors conducted a comparative study on impression techniques for ocular prosthesis. Three prostheses were made for each one of twenty patients, using the following techniques: 1. injection; 2. the stock tray; 3. an individual tray. The degree of mobility of the three prostheses was measured by an apparatus devised by the authors as a substitute for a sinoptophorus. Results obtained analyzed statistically are indicative that the injection method was the best in the sample under study, on the present casuistics