Abstract This study employed e-Vol DXS cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities were found between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying that they are appropriate for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the reliability of these instruments in navigating danger zones during RCR, and contributes valuable insights for dental practitioners who handle complex root canal scenarios in mandibular molars. eVol e Vol (CBCT RCR. RCR . (RCR) Reciproc®, Reciproc (Reciproc® Next Next® Evo Evo® Gold® Gold T1 T (T1 T2 (T2 treatment scrutinized (MB (ML pretreatment pre T1. Posttreatment Post findings However distances essence wear (RCR Reciproc® (Reciproc (T

Resumo Este estudo avaliou um método para determinar a geometria espacial do preparo do canal radicular (PCR) usando uma dinâmica de navegação e um algoritmo específico do software e-Vol DX. Imagens de tomografia computadorizada de feixe cônico (TCFC) de 168 molares inferiores foram adquiridas antes e depois do PCR, usando instrumentos de níquel-titânio (NiTi) (ProTaper Next, BioRace, Reciproc Blue e WaveOne Gold). A geometria espacial dos canais radiculares e o risco operatório de desgaste desproporcional das paredes dentinárias após o preparo foram avaliados usando o software de TCFC e-Vol DX. Um sistema de Score de 3 pontos foi usado após a mensuração da espessura cemento/dentina antes e depois do PCR, em toda extensão dos canais radiculares. Os terços radiculares foram distribuídos em três partes de tamanhos semelhantes, e os Scores foram categorizados em três níveis: 1. risco leve (1/3), 2. risco moderado (2/3), 3. risco severo (3/3). Esses níveis foram propostos de acordo com o risco de criar formas desproporcionais, paredes finas ou perfurações radiculares. Os dados foram analisados estatisticamente pelo teste exato de Fischer ((=5%). Não houve diferenças significativas no risco operatório entre os sistemas de NiTi acionados a motor, para as paredes distal ou mesial em todos os terços do canal radicular (p>0,05). O método de geometria espacial para avaliar o risco operatório permite o planejamento clínico para um alargamento previsível do canal radicular em todos os terços radiculares. Com base no uso de uma estratégia de navegação dinâmica de canais radiculares de molares inferiores analisados em imagens de TCFC, os instrumentos de NiTi acionados estudados não apresentaram um aumento do risco operatório durante o preparo dos canais radiculares. PCR (PCR eVol Vol DX (TCFC 16 níqueltitânio níquel titânio (NiTi ProTaper Next BioRace Gold. Gold . Gold) cementodentina cemento dentina semelhantes 1 1/3, 13 1/3 , (1/3) 2 2/3, 23 2/3 (2/3) 3/3. 33 3/3 (3/3) desproporcionais =5%. 5 =5% ((=5%) motor p>0,05. p005 p p>0,05 0 05 (p>0,05) 1/ (1/3 2/ (2/3 3/ (3/3 =5 ((=5% p00 p>0,0 (p>0,05 (1/ (2/ (3/ = ((=5 p0 p>0, (p>0,0 (1 (2 (3 ((= p>0 (p>0, ( (( p> (p>0 (p> (p

Abstract This study evaluated a method to determine the spatial geometry of root canal preparation (RCP) using navigation dynamics and a specific algorithm from a new CBCT software (e-Vol DX). CBCT scans of 168 root canals of mandibular molars were acquired before and after RCP, using nickel-titanium (NiTi) instruments (ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold). The spatial geometry of the root canals and the operative risk of disproportional wear of dentinal walls after RCP were evaluated using a new CBCT software. A 3-point scoring system was used after the measuring of cementum/dentin thickness before and after RCP in all root thirds. The root thirds were distributed into three parts of similar sizes, and the scores were categorized at three levels: 1. mild risk (1/3), 2. moderate risk (2/3), 3. severe risk (3/3). These levels were proposed according to the risk of creating disproportionate shapes, thin walls, or perforations. The data were analyzed statistically by Fischer’s exact test (α = 5%). There were no significant differences in operative risk among the NiTi engine-driven systems, for the distal or mesial walls of all the root canal thirds (p>0.05). The spatial geometry method to assess operative risk allows clinical planning for a predictable enlargement of the root canal in all root thirds. Based on using a map-reading strategy on root canals in CBCT scans, NiTi engine-driven instruments did not present an increased operative risk during RCPs. (RCP eVol e Vol DX. DX . DX) 16 nickeltitanium nickel titanium (NiTi ProTaper Next BioRace Blue Gold. Gold Gold) 3point point 3 cementumdentin cementum dentin sizes 1 1/3, 13 1/3 , (1/3) 2 2/3, 23 2/3 (2/3) 3/3. 33 3/3 (3/3) shapes perforations Fischers Fischer s α 5%. 5 5% 5%) enginedriven engine driven systems p>0.05. p005 p p>0.05 0 05 (p>0.05) mapreading map reading RCPs 1/ (1/3 2/ (2/3 3/ (3/3 p00 p>0.0 (p>0.05 (1/ (2/ (3/ p0 p>0. (p>0.0 (1 (2 (3 p>0 (p>0. ( p> (p>0 (p> (p

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Resumo Este estudo descreve um método para identificar canais radiculares acessórios usando o software e-Vol DX em imagens de TCFC. Os canais radiculares acessórios constituem abrigos estratégicos aos micro-organismos presentes nas infecções endodônticas. A identificação destes pequenos canais em exames radiográficos periapicais apresenta limitações, além de apresentar baixa acessibilidade natural a ação dos instrumentos endodônticos e dos agentes antimicrobianos. Os canais acessórios apresentam diâmetros suficientes para ficarem visíveis em imagens de tomografia computadorizada de feixe cônico (TCFC) de alta resolução espacial. Porém, podem passar despercebidos ou até confundidos quando não ocorrer treinamento específico para este tipo de diagnóstico. A metodologia consiste em estabelecer finos slices (0,1 mm ou menor) obtidos a partir de cortes coronal, sagital e axial. O método consiste nos seguintes passos: ao encontrar uma linha hipodensa de um canal radicular principal em um corte tomográfico (axial, sagital ou coronal) deve-se ajustar as linhas de navegação da reconstrução multiplanar (MPR) para que fiquem paralelas ao canal principal e perpendiculares a esta linha hipodensa (correção de paralaxe). A seguir, depois de criterioso ajuste da imagem em busca do canal acessório, aparece invariavelmente como uma linha em um dos cortes tomográficos da MPR, outra linha em outro corte e um ponto no terceiro corte. Os três cortes da MPR apresentam imagens com a sequência linha-linha-ponto. Desta maneira, pode-se identificar um canal acessório e visualizá-lo em reconstrução volumétrica em filtro específico. Esta metodologia é fácil de ser aplicada e pode beneficiar o diagnóstico quando se deseja identificar canais radiculares acessórios e distingui-lo de linha de fratura radicular.

Abstract This study describes a methodology to identify accessory root canals using the e-Vol DX software in CBCT scans. Accessory root canals are strategic shelters for microorganisms present in root canal infections. The identification of these small canals in periapical radiographic exams has limitations, besides being markedly limited accessibility to the action of endodontic instruments and to the antimicrobial agents. A significant number of accessory canals have sufficient diameters to be visible on cone-beam computed tomography (CBCT) images of high spatial resolution. Therefore, it may go unnoticed or even confused when there is no specific training for this type of diagnosis. The methodology consists in establishing thin slices (0.1mm or smaller) obtained from coronal, sagittal and axial slices. The method consists of the following steps: during navigation along the long axis of a root canal when finding a possible hypodense line of main root canal in a tomographic section (axial, sagittal or coronal), the navigation software lines of the multiplanar reconstruction (MPR) must be adjusted so that they are parallel and perpendicular to the hypodense line (parallax correction). Then, after judiciously adjusted, the accessory canal image will invariably appear as a line on one of the MPR tomographic slices, another line on another slice, and a dot on the third slice. The three sections of the MPR present images with the “line-line-dot” sequence. In this way, it is possible to identify an accessory root canal and also visualize it in volumetric reconstruction in a specific filter. The application of this method is easy to employed and may benefit the diagnosis when you want to visualize accessory root canals and distinguish it from root fracture line.

Abstract Cone-beam computed tomography (CBCT) is an essential imaging method that increases the accuracy of diagnoses, planning and follow-up of endodontic complex cases. Image postprocessing and subsequent visualization relies on software for three-dimensional navigation, and application of indexation tools to provide clinically useful information according to a set of volumetric data. Image postprocessing has a crucial impact on diagnostic quality and various techniques have been employed on computed tomography (CT) and magnetic resonance imaging (MRI) data sets. These include: multiplanar reformations (MPR), maximum intensity projection (MIP) and volume rendering (VR). A recent advance in 3D data visualization is the new cinematic rendering reconstruction method, a technique that generates photorealistic 3D images from conventional CT and MRI data. This review discusses the importance of CBCT cinematic rendering for clinical decision-making, teaching, and research in Endodontics, and a presents series of cases that illustrate the diagnostic value of 3D cinematic rendering in clinical care.

Abstract Great attention has been given to the study of radiolucent periapical lesions to avert possible misdiagnosis of apical periodontitis associated with certain radiolucent non-endodontic lesions. However, there are a significant number of radiopaque lesions found in the periapical region, which could be equally relevant to endodontic practice. The diagnosis and management of these radiopaque/hyperdense lesions could be challenging to the endodontist. These bone alterations could be neoplastic, dysplastic or of metabolic origin. In the context of the more widespread use of cone-beam CT, a detailed review of radiopaque inflammatory and non-inflammatory lesions is timely and may aid clinicians perform a differential diagnosis of these lesions. Distinguishing between inflammatory and non-inflammatory lesions simplifies diagnosis and consequently aids in choosing the correct therapeutic regimen. This review discusses the literature regarding the clinical, radiographic, histological and management aspects of radiopaque/hyperdense lesions, and illustrates the differential diagnoses of these lesions.

O objetivo deste estudo foi detectar a presença de istmos em molares superiores e inferiores, e avaliar a frequência usando dinâmica de navegação em imagens de tomografia computadorizada de feixe cônico (TCFC). Duzentos molares superiores e inferiores humanos foram usados em ensaio ex vivo. Uma amostra consecutiva de duzentos molares (superiores e inferiores, primeiros e segundos) foi selecionada a partir de exames de TCFC. Os istmos foram detectados a partir do orifício de entrada da cavidade pulpar em direção ao ápice, de acordo com o início e o fim, nas categorias: 1. início e término no terço cervical; 2. início no terço cervical e término no terço médio; 3. início no terço cervical e término no terço apical; 4. início e fim no terço médio; 5. início no terço médio e término no terço apical; 6. início e término no terço apical ; 7. ausência de istmo radicular. Os exames de TCFC foram obtidos em diferentes planos com estratégias de navegação em cortes axiais de 0,5 mm/0.5 mm de coronal para a direção apical. As frequências de istmo radicular foram analisadas de acordo com o terço da raiz e avaliadas pelo teste do qui-quadrado. O nível de significância estabelecido foi de 5%. A presença de istmo radicular em molares superiores foi de 86% em ensaio ex vivo e 62% em ensaio in vivo, enquanto que, em molares inferiores foram observados 70% em ensaio ex vivo e 72% em ensaio vivo. A frequência radicular de istmo foi elevada em ambos os modelos de estudo. A dinâmica da estratégia de navegação em imagens de TCFC é precisa para detectar a localização do istmo radicular.

The aim of this study was to detect root isthmuses in maxillary and mandibular molars and evaluate their frequencies using map-reading dynamics in CBCT images. Two hundred extracted human maxillary and mandibular molars were used in ex vivo assay. A consecutive sample of two hundred maxillary and mandibular molars (first and second) was selected from CBCT exams. The isthmuses were detected from the pulp orifice to the apex and were recorded according to their beginning and their end, into categories: 1. begin and end in cervical third; 2. beginning in cervical third and end in middle third; 3. beginning in cervical third and end in apical third; 4. beginning and end in middle third; 5. begin in middle third and end in apical third; 6. beginning and end in apical third; 7. no isthmus. The scans were obtained in different planes with map-reading in axial slices of 0.5 mm/0.5 mm involved the coronal to apical direction. The frequencies of isthmus were analyzed according to the level of root and evaluated by Chi-square test. The level of significance was set at α=0.05. The presence of isthmus detected in maxillary molars was 86% in ex vivo assay and 62% in vivo assay, whereas in mandibular molars was observed 70% in ex vivo assay and 72% in vivo assay. The frequency of isthmus was high in both study models. The map-reading dynamics in CBCT images was found to be precise to detect the localization of isthmus.

OBJECTIVE:To evaluate the discrepancy of root canal filling (RCF) measurements obtained from original root specimens and cone-beam computed tomography (CBCT) images. MATERIAL AND METHODS: Seventy-two human maxillary anterior teeth were prepared up to an ISO #50 K-File 1 mm short of the apical foramen. Thus, the teeth were randomly divided into 8 groups, according to the root canal filling material: Sealapex ®, Sealapex®+gutta-percha points, Sealer 26®, Sealer 26®+gutta-percha points, AH PlusTM, AH PlusTM+gutta-percha points, Grossman Sealer, and Grossman Sealer+gutta-percha points. After root canal preparation and RCF, CBCT scans were acquired and the specimens were sectioned in axial, sagittal and coronal planes. The RCF measurements were obtained in different planes and thicknesses to determine the discrepancy between the original root specimens (using a digital caliper) and the CBCT images (using the scanner’s proprietary software). One-way analysis of variance and Tukey tests were used for statistical analyses. The significance level was set at α=5%. RESULTS: Measurements of the different endodontic filling materials were 9% to 100% greater on the CBCT images than on the original root specimens. Greater RCF dimensions were found when only sealers were used, with statistically significant difference among the groups. CONCLUSIONS: RCF dimensions were greater on CBCT images than on the original root specimens, especially when only sealer was used.

OBJETIVO: determinar as medidas lineares dos estágios de desenvolvimento da dentição permanente humana, usando tomografia computadorizada de feixe cônico (TCFC). MÉTODOS: este estudo foi desenvolvido a partir de bancos de dados de clínicas radiológicas privadas, envolvendo 18 pacientes (13 do sexo masculino, 5 do sexo feminino, com idades variando entre 3 e 20 anos). As imagens das TCFC foram obtidas por meio do sistema i-CAT e medidas com uma função específica do programa desse mesmo sistema. Duzentos e trinta e oito dentes foram analisados, em diferentes estágios de desenvolvimento, nos planos coronal e sagital. O método foi baseado na delimitação e mensuração das distâncias entre pontos anatômicos correspondentes ao desenvolvimento das coroas e raízes dentárias. A partir dos valores obtidos, pôde-se desenvolver um modelo quantitativo para se avaliar os estágios inicial e final de desenvolvimento para todos os grupos dentários. RESULTADOS E CONCLUSÕES: as medidas obtidas dos diferentes grupos dentários estão de acordo com as estimativas das investigações publicadas previamente. As imagens por TCFC dos diferentes estágios de desenvolvimento podem contribuir no diagnóstico, planejamento e resultado dos tratamentos em diversas especialidades odontológicas. As dimensões das coroas e das raízes dentárias podem ter importantes aplicações clínicas e em pesquisas, constituindo uma técnica não invasiva que contribui com estudos in vivo. Entretanto, mais estudos são recomendados a fim de minimizar possíveis variáveis metodológicas.

OBJECTIVE: To determine the linear measurements of human permanent dentition development stages using Cone-Beam Computed Tomography. METHODS: This study was based on databases of private radiology clinics involving 18 patients (13 male and 5 female, with age ranging from 3 to 20 years). Cone-Beam Computed Tomography (CBCT) images were acquired with i-CAT system and measured with a specific function of the i-CAT software. Two hundred and thirty-eight teeth were analyzed in different development stages in the coronal and sagittal planes. The method was based on delimitation and measurement of the distance between anatomical landmarks corresponding to the development of the dental crowns and roots. These measurements allowed the development of a quantitative model to evaluate the initial and final development stages for all dental groups. RESULTS AND CONCLUSIONS: The measurements acquired from different dental groups are in agreement with estimates of investigations previously published. CBCT images of different development stages may contribute to diagnosis, planning and outcome of treatment in various dental specialties. The dimensions of dental crowns and roots may have important clinical and research applications, constituting a noninvasive technique which contributes to in vivo studies. However, further studies are recommended to minimize methodological variables.

INTRODUÇÃO: o exame de tomografia computadorizada de feixe cônico (TCFC) oferece excelente representação dos tecidos duros da articulação temporomandibular (ATM). OBJETIVO: investigar as alterações morfológicas do côndilo mandibular, da infância à idade adulta, utilizando a TCFC. MÉTODOS: um estudo transversal foi conduzido envolvendo 36 côndilos de 18 indivíduos com idades variando entre 3 e 20 anos. As imagens dos côndilos foram obtidas por meio do sistema i-CAT e medidas com uma ferramenta do programa específica para ATM, que permite cortes perpendiculares à cabeça do côndilo, com correção individual em função das diferenças angulares de cada um. As maiores distâncias nas vistas lateral e frontal foram consideradas tanto para os côndilos do lado direto como para os do lado esquerdo. RESULTADOS: a dimensão lateral do côndilo mandibular parece ser estabelecida de maneira precoce, sofrendo poucas alterações com o passar dos anos, enquanto a dimensão frontal tende a aumentar. Assimetrias entre o côndilo esquerdo e o direito foram comumente observadas; no entanto, tais diferenças não apresentaram significância estatística para as vistas lateral (P=0,815) e frontal (P=0,374). CONCLUSÕES: os côndilos apresentaram simetria com relação ao tamanho, sendo observado crescimento apenas na dimensão frontal Os resultados sugerem que a TCFC constitui-se numa ferramenta útil na mensuração e avaliação das dimensões condilares.

INTRODUCTION: Cone-Beam Computed Tomography (CBCT) imaging provides an excellent representation of the temporomandibular joint bone tissues. OBJECTIVE: The aim of this study was to investigate morphological changes of the mandibular condyle from childhood to adulthood using CBCT. METHODS: A cross-sectional study was conducted in 36 condyles of 18 subjects from 3 to 20 years of age. Condyles were scanned with the i-CAT Cone-Beam 3D imaging system and linear dimensions were measured with a specific i-CAT software function for temporomandibular joint, which permitted slices perpendicular to the condylar head, with individual correction in function of angular differences for each condyle. The greatest distances in lateral and frontal sections were considered on both left and right mandibular condyles. RESULTS: The linear dimension of the mandibular condyle on the lateral section varied little with growth and seemed to be established early, while the dimension of the frontal section increased. Small asymmetries between left and right condyles were common but without statistical significance for both lateral (P=0.815) and frontal (P=0.374) dimensions. CONCLUSIONS: The condyles were symmetric in size and only the frontal dimension enlarged during growth. These preliminary data suggest that CBCT is a useful tool to measure and evaluate the condylar dimensions.

O objetivo deste estudo foi determinar a influência de retentores intraradiculares na periodontite apical (PA), detectados por radiografia periapical (RP) e tomografia computadorizada de feixe cônico (TCFC). Um total de 1.020 imagens, tomadas de 619 pacientes (245 homens, idade média de 50,1 anos), entre Fevereiro de 2008 e Setembro de 2009, foram avaliadas. A presença e o comprimento de retentores intraradiculares (curto, médio e longo) foram associados com a PA. Os dados foram estatisticamente avaliados empregando-se os testes Qui-quadrado e o Kappa. Três observadores avaliaram todas as imagens, considerando-se a presença de retentor intraradicular, seu comprimento e a PA. De um total de 1.020 dentes analisados no estudo, a PA foi detectada em 397 (38,92%) usando RP e em 614 (60,19%) usando TCFC (p<0,001). Em 591 retentores intraradiculares, nos diferentes comprimentos (curto, médio, longo) foram observadas PA usando RP em 15,06%; 18,78% e 7,95%, respectivamente (p=0,466). Considerando os mesmos comprimentos de retentores foram observados PA em 24,20%; 26,40% e 11,84% por meio de TCFC, respectivamente (p=0,154). A distribuição de retentores nos diferentes grupos dentários mostrou elevada prevalência em dentes anteriores superiores (54,79%). Os retentores intraradiculares não influenciaram a PA e as TCFC detectaram mais freqüentemente a periodontite apical.

The determination of the success of endodontic treatment has been often discussed based on outcome obtained by periapical radiography. The aim of this study was to verify the influence of intracanal post on apical periodontitis detected by cone-beam computed tomography (CBCT). A consecutive sample of 1020 images (periapical radiographs and CBCT scans) taken from 619 patients (245 men; mean age, 50.1 years) between February 2008 and September 2009 were used in this study. Presence and intracanal post length (short, medium and long) were associated with apical periodontitis (AP). Chi-square test was used for statistical analyses. Significance level was set at p<0.01. The kappa value was used to assess examiner variability. From a total of 591 intracanal posts, AP was observed in 15.06%, 18.78% and 7.95% using periapical radiographs, into the different lengths, short, medium and long, respectively (p=0.466). Considering the same posts length it was verified AP in 24.20%, 26.40% and 11.84% observed by CBCT scans, respectively (p=0.154). From a total of 1,020 teeth used in this study, AP was detected in 397 (38.92%) by periapical radiography and in 614 (60.19%) by CBCT scans (p<0.001). The distribution of intracanal posts in different dental groups showed higher prevalence in maxillary anterior teeth (54.79%). Intracanal posts lengths did not influenced AP. AP was detected more frequently when CBCT method was used.

O objetivo deste estudo foi discutir um método para obter o raio de curvatura a partir de imagens de tomografias computadorizadas cone beam (CBCT). A severidade da curvatura do canal radicular é essencial para selecionar o instrumento e a técnica de instrumentação. O diagnóstico e o planejamento do tratamento endodôntico tem sido feito com o auxílio da radiografia periapical. Contudo, a precisão da imagem obtida por CBCTpara identificar alterações anatômicas e patológicas reduz os resultados falso-negativos. Em imagens com alta qualidade de resolução a mensuração do raio de curvatura pode ser obtida a partir do circuncentro. Baseado em três pontos matemáticos com a ferramenta de trabalho de um software (Planimp®) pode-se calcular o raio de curvatura em ambas as direções, tanto para frente em sentido apical, como para trás em direção cervical. Este método para se determinar o raio de curvatura auxiliado por imagens de tomografia computadorizada é fácil, reprodutível e favorece o planejamento do tratamento endodôntico o que influencia na eficácia do preparo de canais radiculares curvos.

This article describes and discusses a method to determine root curvature radius by using cone-beam computed tomography (CBCT). The severity of root canal curvature is essential to select instrument and instrumentation technique. The diagnosis and planning of root canal treatment have traditionally been made based on periapical radiography. However, the higher accuracy of CBCT images to identify anatomic and pathologic alterations compared to panoramic and periapical radiographs has been shown to reduce the incidence of false-negative results. In high-resolution images, the measurement of root curvature radius can be obtained by circumcenter. Based on 3 mathematical points determined with the working tools of Planimp® software, it is possible to calculate root curvature radius in both apical and coronal directions. The CBCT-aided method for determination of root curvature radius presented in this article is easy to perform, reproducible and allows a more reliable and predictable endodontic planning, which reflects directly on a more efficacious preparation of curved root canals.

O objetivo do estudo transversal foi avaliar a prevalência de dentes tratados endodonticamente em uma população de Brasileiros adultos. Um total de 1.401 radiografias panorâmicas, oriundas do banco de imagens do Centro de Radiologia e Imagens Orofacial de Cuiabá (CRIOF, Cuiabá, MT, Brasil), entre agosto de 2002 e setembro de 2007 foi analisado. Três examinadores avaliaram todas as imagens, considerando-se a presença de tratamento endodôntico, indiferente à qualidade do tratamento (presença ou ausência de retentor intra-radicular ou periodontite apical). Os dados foram estatisticamente avaliados empregando-se razão de chances (odds ratio), regressão logística e teste Qui-quadrado. A partir de 29.467 dentes avaliados, 6.313 (21,4%) eram endodonticamente tratados. Os pré-molares e molares superiores foram os dentes com maior prevalência de tratamento, enquanto os incisivos inferiores representaram o grupo de menor prevalência. Indivíduos do gênero feminino (61,9%), e com idade entre 46 a 60 anos apresentaram maior prevalência de tratamento endodôntico. O presente estudo encontrou elevada prevalência de dentes tratados endodonticamente em adultos Brasileiros comparada com outros estudos epidemiológicos.

This cross-sectional study examined the prevalence of endodontically treated teeth in 1,401 Brazilian adults. Panoramic radiographs were selected at the Radiological Center of Orofacial Images (CRIOF, Cuiabá, MT, Brazil) between August 2002 and September 2007. Three independent endodontists discussed interpretation criteria and classified specimens according to the following data: presence of root canal treatment, which was defined as partially or completely filled canal space, regardless of whether filling ended at the radiographic apex or not; presence of intracanal post; and associated apical periodontitis. Odds ratio, logistic regression and a chi-square test were used for statistical analyses. Significance level was set at p<0.05. Of 29,467 teeth evaluated, 6,313 (21.4%) were treated endodontically. Endodontic treatment was most frequent in maxillary premolars and molars, whereas mandibular incisors showed the lowest prevalence. Most endodontically treated teeth were found in people aged 46 to 60 years (47.6%, p<0.001) and the prevalence increased with age in this age range. Females (61.9%, p<0.001) showed a higher prevalence of teeth with root fillings than males. The present study found a higher prevalence of endodontically treated teeth in a Brazilian adult population compared to the prevalence reported in epidemiological studies conducted in other countries.