Abstract (Introduction): The current cultivation of trees is insufficient to cover the national demand for wood, in this way small producers become an alternative solution to this situation, since despite having small areas, in the country there are abundant farms with these conditions; However, the current forest management scheme does not meet adequate standards for the incorporation of these small producers. (Objective): To present an adaptive forest management scheme (AFMS) to the needs of the small farmer, in addition, to demonstrate the institutional availability to change according to expert criteria. (Methodology): 1) the factors that influence the decision to adopt an agricultural or forestry production system were identified; 2) a profile of an ideal productive system that met the interests and preferences of the small producer was made, which was compared with the characteristics of agricultural and forestry production; 3) the proposal of an EMFA adjusted to the preferences and interest of the producer was made, which was also compared with the ideal profile; 4) three proposed change actions were presented to experts, obtaining different degrees of possibility of changes in the EMFA. (Results): The discrepancy of the forest management scheme for the cultivation of trees with the perspective that a small producer has on an ideal production system was evidenced, as well as the substantial improvement that an EMFA would have in the valuation of the small producer and the institutional availability to change the EMFA according to the perspective of the small producers. (Conclusions): The adjustment of the forest management scheme allows a greater adoption of the activity by the small producer, but it was recognized that any proposal that is made would be successful only if forest governance makes it more flexible and allows change.

Resumen (Introducción): El cultivo actual de árboles es insuficiente para cubrir la demanda nacional de madera, de este modo, los pequeños productores se tornan como una alternativa de solución ante esta situación, ya que pese a contar con áreas pequeñas, en el país son abundantes las fincas con estas condiciones; sin embargo, el esquema actual de manejo forestal no cumple con estándares adecuados para la incorporación de estos pequeños productores. (Objetivo): Presentar un esquema de manejo forestal adaptativo (EMFA) a las necesidades del pequeño productor, además de evidenciar la disponibilidad institucional al cambio, según el criterio experto. (Metodología): 1) se identificaron los factores que influyen en la decisión de adopción de un sistema productivo agrícola o forestal; 2) se realizó un perfil de un sistema productivo ideal que cumpliera con los intereses y preferencias del pequeño productor, el cual se confrontó con las características de la producción agrícola y forestal; 3) se efectuó la propuesta de un EMFA ajustado a las preferencias e interés del productor, que fue también confrontada con el perfil ideal; 4) se expusieron tres acciones de cambio propuestas ante expertos, obteniendo diferentes grados de posibilidad de cambios en el EMFA. (Resultados): Se evidenció la discrepancia del esquema de manejo forestal para el cultivo de árboles con la perspectiva que un pequeño productor tiene sobre un sistema de producción ideal, asimismo la mejora sustancial que un EMFA tendría en la valoración del pequeño productor y la disponibilidad institucional al cambio del EMFA, según la perspectiva de los pequeños productores. (Conclusiones): El ajuste del esquema de manejo forestal permite una mayor adopción del cultivo de árboles por parte del pequeño productor, pero se reconoció que cualquier propuesta que se realice lograría ser exitosa si la gobernanza forestal flexibiliza y posibilita el cambio.

The objective of this work was to evaluate the total concentration and bioaccessible fractions of Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Pb, V and Zn in berry fruits and analyze the influence of different cultivars and growing conditions on the obtained results. The variations in bioaccessible concentrations were from 7.7-30, 17-29, 22-50, 1.8-96, 22-33 and 20-51% of the total concentration, for Ba, Cu, Fe, Mn, Pb and Zn, respectively. Copper showed greater bioaccessibility in blackberry and blueberry. For Fe, bioaccessibility was observed in all strawberries and blueberries and in some blackberries. Zinc presented higher bioaccessible fractions in strawberries. For V, only the sample Blackberry 124 showed bioaccessible concentration, (11% of the total concentration). Regarding the different forms of cultivation, the strawberries that received radiation from the red and white lamps presented a higher production of fruit compared to the other systems, however, in relation to the absorption of nutrients, a small variation was observed between the fruits. Ba Ca Cd Cr Cu Fe K Mg Mn results 7.730, 7730 7.7 30, 7 30 7.7-30 1729, 1729 17 29, 29 17-29 2250, 2250 22 50, 50 22-50 1.896, 1896 1.8 96, 1 8 96 1.8-96 2233 33 22-3 2051% 2051 20 51% 51 20-51 respectively blueberry blackberries 12 11% 11 (11 concentration. . concentration) cultivation systems however nutrients 730 7.730 773 77 7. 3 7.7-3 172 2 17-2 225 5 22-5 896 1.896 189 18 1. 9 1.8-9 223 22- 205 20-5 (1 73 7.73 7.7- 17- 89 1.89 1.8- 20- (

The use of materials such as organofunctionalized silica for application in solid phase extraction (SPE) allows the preconcentration of several ions, including Pt, and subsequent detection. This work aims to synthesize and characterize an organofunctionalized silica (Sil-TMSDT) with the silylant N’(trimethoxysilyl)propylethylenetriamine and its application as a solid phase in the preconcentration Pt4+ ions in aqueous media, using detection by flame atomization atomic absorption spectroscopy (FAAS). The Fourier-transform infrared spectroscopy (FTIR) spectra and scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy (EDS) confirmed the aminofunctionalization of the silica. For the adsorption process, a preconcentration mini-column with 200 mg of Sil-TMSDT, a solution of 0.485 mg L−1 of K2[PtCl6] at pH 10 and HNO3 0.5 mol L−1 as eluent were used, obtaining an enrichment factor of 15-fold with retention efficiency higher than 99%. The Pt4+ ion determined by FAAS showed a linear response between 0.02 and 0.40 mg L−1; a linear coefficient where R = 0.9981; a 16-fold preconcentration factor; a limit of quantification (LOQ) and limit of detection (LOD) of 0.045 and 0.014 mg L−1, respectively. The proposal system showed analytical applicability to determining Pt4+ ion in an aqueous medium and could be used to detect traces of this potentially toxic metal in biological fluids such as urine and blood. SPE (SPE Pt SilTMSDT Sil TMSDT (Sil-TMSDT Ntrimethoxysilylpropylethylenetriamine N trimethoxysilyl propylethylenetriamine Pt4 media FAAS. . (FAAS) Fouriertransform Fourier transform FTIR (FTIR SEM (SEM energydispersive energy dispersive EDS (EDS process minicolumn mini column 20 SilTMSDT, TMSDT, Sil-TMSDT 0485 0 485 0.48 L1 L 1 L− K2PtCl6 KPtCl K2 PtCl6 K PtCl K2[PtCl6 HNO 05 5 0. 15fold fold 15 99 99% 002 02 0.0 040 40 0.4 0.9981 09981 9981 16fold 16 LOQ (LOQ LOD (LOD 0045 045 0.04 0014 014 0.01 respectively blood (FAAS 2 048 48 K2PtCl K2[PtCl 9 00 04 4 0.998 0998 998 004 001 01 0.99 099 0.9 09

The selective separation of precious metals from complex aqueous solutions is important in protecting the environment, aquatic ecosystems, water resources and recycling resources. In this study, cysteine-containing polymeric nanoparticles were synthesized using the molecular imprinting (MIP) technique with the mini-emulsion polymerization method. The basis of the polymer design is inspired by affinity of silver to cysteine in biological systems. The synthesized silver ion imprinted (Ag+-IIP) poly(hydroxyethylmethacrylate-N -methacryloyl-L-cysteine) poly(HEMA-MAC) nanoparticles were characterized by elemental analysis, zeta sizer, Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM). The effects of pH, ionic strength and interaction time on adsorption of Ag+ ions were investigated. In experimental studies, the highest adsorption amount (196.9 mg g1 nanoparticle) was reached in a short period of 40 min at pH 5.0 and 150 mg L-1 concentration. Selectivity studies of synthesized Ag+-IIP nanoparticles against silver (Ag+) ions were carried out in the presence of lithium (Li+), barium (Ba2+), mercury (Hg2+) and cadmium (Cd2+) ions. Experimental results indicate that nanoparticles adsorb Ag+ ions with high selectivity. Ag+-IIP nanoparticles have 3.7, 3.1, 2.4, and 2.6 times more selective or higher affinity for Ag+ ions compared to Li+, Ba2+, Hg2+ and Cd2+ ions, respectively, compared to Ag+-non-imprinted (NIP) nanoparticles. environment ecosystems study cysteinecontaining containing MIP (MIP miniemulsion mini emulsion method systems Ag+IIP AgIIP IIP Ag (Ag+-IIP polyhydroxyethylmethacrylateN poly hydroxyethylmethacrylate N methacryloylLcysteine methacryloyl L -methacryloyl-L-cysteine polyHEMAMAC HEMA MAC poly(HEMA-MAC analysis sizer FTIR (FTIR spectroscopy AFM, AFM , (AFM) SEM. SEM . (SEM) investigated 196.9 1969 196 9 (196. g nanoparticle 4 50 5 0 5. 15 L1 1 L- concentration (Ag+ Li Li+ (Li+) Ba2 Ba Ba2+ (Ba2+) Hg2 Hg (Hg2+ Cd2 Cd (Cd2+ selectivity 37 3 7 3.7 31 3.1 24 2 2.4 26 6 2. respectively Ag+nonimprinted Agnonimprinted non NIP (NIP (AFM (SEM 196. 19 (196 (Ag (Li+ (Ba2+ (Hg2 (Cd2 3. nonimprinted (19 (Li (Ba2 (Hg (Cd (1 (Ba (

Analysis of variance (ANOVA)-simultaneous component analysis (ASCA) is a method of choice for factorial design studies of environmental impacts on plant metabolomes and can be used to quantitatively carry out this comparative analysis. The impacts of seven mixture design extractor systems made up of ethanol, dichloromethane, and hexane and their 1:1 binary and 1:1:1 ternary solvents for several replicate experiments (n = 3, 4, 5) were assessed using ASCA models determined from Fourier-transform infrared (FTIR), near-infrared (NIR), and UV-Vis spectroscopic measurements on yerba mate leaf extracts. This analysis considered two-factor effects: secondary sexual dimorphism (male and female plants) and cultivation systems (monoculture and agroforestry), as well as their interaction effect. The three binary solvents were found to be more efficient extractor systems for all four detectors as they found 83 main and interaction effects significant at or above the 95% confidence level compared with only 47 for the pure solvent extracts. Binary solvent extracts resulted in averages between 44.04 and 86.61% for the ASCA total effect variances compared with 40.62 to 71.07% for pure extractors. Of the 60 significant effects found for experiments with 5 repetitions 53 or 88% were obtained with only triplicate determinations. The choice of spectroscopic technique and solvent system have large impacts on metabolomic analysis results. ANOVAsimultaneous ANOVA simultaneous (ASCA ethanol dichloromethane 11 1 1: 111 1:1: n 3 4 Fouriertransform Fourier transform FTIR, FTIR , (FTIR) nearinfrared near NIR, NIR (NIR) UVVis UV Vis twofactor two factor male plants monoculture agroforestry, agroforestry agroforestry) 8 95 4404 44 04 44.0 8661 86 61 86.61 4062 40 62 40.6 7107 71 07 71.07 extractors 6 88 determinations results (FTIR (NIR 9 440 0 44. 866 86.6 406 40. 710 7 71.0 86. 71.

RESUMO Regiões com climas semiáridos apresentam condições ambientais que resultam em estresses abióticos às plantas. A maior área de produção de melão (Cucumis melo L.) do Brasil, o Estado do Rio Grande do Norte, possui essas características climáticas. O uso de bioestimulantes nesses sistemas de produção pode mitigar os efeitos dos estresses abióticos e aumentar a produtividade e a qualidade dos frutos. O objetivo neste estudo foi avaliar as características fisiológicas e de produção do meloeiro, sob aplicação de bioestimulantes. Os bioestimulantes Acadian®, Folicist® e Nov@® foram aplicados e comparados ao tratamento controle (sem bioestimulantes), em melões ‘Goldex’ e ‘McLaren’. Nov@® proporcionou maior assimilação de CO2, transpiração e condutância estomática, assim como ascorbato peroxidase em ‘Goldex’ e ‘McLaren’. Maior catalase foi obtida pela aplicação de Nov@®, enquanto que o uso de Folicist® resultou em maior teor de malondialdeído. A cultivar McLaren apresentou o melhor desempenho fisiológico e bioquímico e a ‘Goldex’ o melhor rendimento. Folicist® promove adaptações fisiológicas aos estresses sem prejudicar a atividade fotossintética. Os bioestimulantes aumentaram a produtividade e o número de frutos por planta e promoveram adaptações fisiológicas às condições semiáridas. plantas Cucumis L. L Brasil Norte climáticas meloeiro Acadian Acadian® Folicist Nov Nov@ bioestimulantes, , bioestimulantes) ‘Goldex Goldex ‘McLaren. ‘McLaren . ‘McLaren’ CO2 CO estomática malondialdeído rendimento fotossintética semiáridas

ABSTRACT Regions with semi-arid climates have environmental conditions that result in abiotic stress to plants. The largest melon (Cucumis melo L.) production area in Brazil, the state of Rio Grande do Norte, has these climatic characteristics. Use of biostimulants in these production systems can mitigate effects of abiotic stress and increase yield and fruit quality. The objective in this study was to evaluate the physiological and production characteristics of melon, under the application of biostimulants. The biostimulants Acadian®, Folicist® and Nov@® were applied and compared to the control treatment (no biostimulants), in ‘Goldex’ and ‘McLaren’ melons. Nov@® led to higher CO2 assimilation, transpiration and stomatal conductance, as well as ascorbate peroxidase, in ‘Goldex’ and ‘McLaren’. Greater catalase was obtained with the application of Nov@®, while the use of Folicist® resulted in higher malondialdehyde content. The cultivar ‘McLaren’ exhibited the best physiological and biochemical performance, and ‘Goldex’ the best yield. Folicist® promotes physiological adaptations to stress without impairing photosynthetic activity. The biostimulants increased yield and number of fruits per plant and promoted physiological adaptations to semi-arid conditions. semiarid semi arid plants Cucumis L. L Brazil Norte quality Acadian Acadian® Folicist Nov Nov@ no biostimulants, , biostimulants) ‘Goldex Goldex ‘McLaren McLaren melons CO assimilation conductance peroxidase ‘McLaren. . content performance activity

ABSTRACT: This study identified and monitored the population fluctuations of insect vectors of Cowpea aphid-borne mosaic virus (CABMV) in experimental orchards in the North and Northwest Regions of the State of Paraná. The experiments were conducted in the cities of Londrina and Paranavaí at the Experimental Research Stations of the Instituto de Desenvolvimento Rural do Paraná-IAPAR-EMATER (IDR-Paraná), Brazil. The study period was from September 2019 to March 2021. In the experiments conducted in Londrina and in Paranavaí, yellow passion fruit plants were grown in trellis systems. Moericke traps were used to capture insects, and collections were performed weekly. Aphids were identified using a taxonomic identification key. The numbers of aphids present in each region were compared, and the populations were correlated with the climate and local precipitation. A total of 1522 and 1340 winged aphids were observed in the experiments in Londrina and Paranavaí, respectively. In Londrina, moderate positive correlations were observed between the number of insects and the maximum and average temperatures, while negative correlations were observed between the number of insects and the minimum temperature and precipitation. In contrast, in Paranavaí, the correlation between aphids and abiotic factors was negative, where maximum temperature was strongly correlated. In both regions, the following seven species of aphid vectors of CABMV were detected: Aphis fabae, Aphis gossypii, Toxoptera citricida, Acyrthosiphon pisum, Brevicoryne brassicae, Macrosiphum euphorbiae and Uroleucon ambrosiae. The population fluctuations of these species were influenced by variations in temperature and precipitation. ABSTRACT aphidborne borne (CABMV Paraná ParanáIAPAREMATER IAPAR EMATER IDRParaná, IDRParaná IDR , (IDR-Paraná) Brazil 201 2021 systems weekly key compared precipitation 152 134 respectively temperatures contrast regions detected fabae gossypii citricida pisum brassicae ambrosiae (IDR-Paraná 20 202 15 13 2 1

RESUMO: O objetivo deste estudo foi identificar e monitorar as flutuações populacionais de insetos vetores do Cowpea aphid-borne mosaic virus (CABMV) em pomares experimentais nas Regiões Norte e Noroeste do Estado do Paraná. Os experimentos foram conduzidos nas cidades de Londrina e Paranavaí nas Estações de Pesquisa Experimental do Instituto de Desenvolvimento Rural do Paraná-IAPAR-EMATER (IDR-Paraná), Brasil. O período de estudo foi de setembro de 2019 a março de 2021. Nos experimentos realizados em Londrina e em Paranavaí, plantas de maracujá amarelo foram cultivadas em sistema de latada. Foram utilizadas armadilhas Moericke para captura dos insetos e as coletas foram realizadas semanalmente. Os pulgões foram identificados por meio de uma chave de identificação taxonômica. Os números de pulgões presentes em cada região foram comparados e as populações correlacionadas com o clima e a precipitação local. Foram observados 1.522 e 1.340 pulgões alados nos experimentos de Londrina e Paranavaí, respectivamente. Em Londrina, foram observadas correlações positivas moderadas entre o número de insetos e as temperaturas máxima e média, enquanto correlações negativas foram observadas entre o número de insetos e a temperatura mínima e precipitação. Em contrapartida, em Paranavaí, a correlação entre pulgões e fatores abióticos foi negativa, onde a temperatura máxima estava fortemente correlacionada. Em ambas as regiões foram detectadas as seguintes sete espécies de pulgões vetores do CABMV: Aphis fabae, Aphis gossypii, Toxoptera citricida, Acyrthosiphon pisum, Brevicoryne brassicae, Macrosiphum euphorbiae e Uroleucon ambrosiae. As flutuações populacionais dessas espécies foram influenciadas pelas variações de temperatura e precipitação. RESUMO aphidborne aphid borne CABMV (CABMV Paraná ParanáIAPAREMATER IAPAR EMATER IDRParaná, IDRParaná IDR , (IDR-Paraná) Brasil 201 2021 latada semanalmente taxonômica local 1522 1 522 1.52 1340 340 1.34 respectivamente média contrapartida negativa correlacionada fabae gossypii citricida pisum brassicae ambrosiae (IDR-Paraná 20 202 152 52 1.5 134 34 1.3 2 15 5 1. 13 3

Efavirenz, an antiretroviral drug, is a class 2 according to the biopharmaceutics classification system. Many dissolution enhancement systems have been tried and our group had success using wet milling to decrease particle size and granules were obtained by spray and freeze drying. In this paper we present data related to the upgrade in the process, raising the solids concentration in the suspension from 10 to 50% (m/v) and changing the drying step for a fluid bed granulation. After that, tablets were obtained. Granules and tablets were fully evaluated and a pharmacokinetic study was also performed with the granules. By powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) it was possible to prove that there was no phase transition in the sample after milling and drying. Dissolution efficiency of 4 from 5 granules was higher than 90%, considering 83% for the raw material. Tablets were technically approved but the dissolution was impacted and just 2 out of 11 showed results > 80%. A high enhancement in the bioavailability was also observed, around 172%. So, it is possible to conclude that efavirenz microcrystals with enhanced dissolution and bioavailability can be formulated into tablets and are a viable system to develop a new drug product. Efavirenz process 1 50 m/v mv m v (m/v granulation Xray X ray PXRD (PXRD FTIR (FTIR 90 90% 83 material 80 80% observed 172 172% So product 9 8 17

In the present article, the scientific journey that led to the development of the Nernst equation, a cornerstone in modern electrochemistry, is discussed. The paper not only explores historical achievements but also traces the evolution of scientific ideas and highlights the key figures who laid the conceptual and experimental groundwork for the seminal contributions of Nernst to the understanding of electrochemical systems. In this exploration, particular attention is paid to the examination of the first three articles published by Nernst between 1888 and 1889. These essential works marked the inception of the engagement of Nernst with the Leipzig Physical Chemistry circle, comprising the distinguished quartet: van’t Hoff, Arrhenius, Ostwald, and Nernst himself. Furthermore, the present study examines the intricate relationship between the Nernst equation and the four basic laws of Thermodynamics, all in an approach accessible to undergraduate students. A concise review elucidates the interpretation and significance of these foundational thermodynamic principles and explain how they hold the formulation of the Nernst equation. article electrochemistry discussed systems exploration 188 1889 circle quartet vant van t Hoff Arrhenius Ostwald himself Furthermore Thermodynamics students 18 1

ABSTRACT The search for more sustainable systems of rice cultivation, especially in relation to water use, has included the evaluation of more-efficient irrigation systems in addition to alternative water sources. The aim of this study was to conduct a phytosociological survey of weeds in rice crops irrigated by subsurface drip with different concentrations of treated dairy effluent, maintaining the soil moisture at saturation or field capacity. A pilot scale experiment was carried out in a protected environment using a randomised block design in a 5 x 2 factorial scheme, with four replications. The IAC 301 cultivar (Arborio rice) was chosen. The phytosociological surveys were carried out on four different dates, and considered the composition as well as the distribution of plant species in each of the applied treatments, using the importance value index (IVI) to evaluate the influence of each treatment. The results showed that cultivating irrigated rice, giving priority to water management, altered the ecology of invasive plants. Fourteen weed species were identified, distributed over 10 families. The effluent dose did not alter the incidence of invasive plants, and only at the final evaluation was there a reduction in the IVI value at effluent concentrations of 50% and 75%. For soil moisture, the highest IVI values occurred on the first two days of the survey under saturated conditions; this result was reversed closer to plant maturity, when the IVI values were higher at field capacity. cultivation use moreefficient efficient sources capacity scheme replications 30 Arborio chosen dates treatments (IVI treatment management plants identified 1 families 50 75 75% conditions maturity 3 7

RESUMO Vários estudos têm vinculado diferentes outcomes organizacionais como antecedentes às capacidades dinâmicas, sendo que se destacam o empreendedorismo, o dinamismo ambiental, os recursos, a gestão do conhecimento, a aprendizagem organizacional e o planejamento estratégico. O presente estudo tem por objetivo avaliar de forma completa, considerando todas as dimensões conceituais, como se relacionam o modelo das alavancas de controle estratégico e as capacidades dinâmicas, considerando o perfil dos empregados da ITAIPU Binacional. Os dados foram coletados por meio de um survey e as hipóteses avaliadas com o auxílio da modelagem de equações estruturais, empregando-se o método de estimação por mínimos quadrados parciais. Os resultados obtidos validaram a hipótese central de que as alavancas de controle influenciam positivamente a presença das capacidades dinâmicas, além de uma das hipóteses complementares de que o sistema interativo influencia positivamente a presença da capacidade de sentir as oportunidades. As alavancas de controle estratégico podem ser tratadas agora pelas organizações como possíveis fontes de capacidades dinâmicas. dinâmicas empreendedorismo ambiental recursos conhecimento completa conceituais Binacional estruturais empregandose empregando parciais oportunidades

ABSTRACT Several studies have thus far linked diverse organizational outcomes as antecedents to dynamic capabilities, with an emphasis on entrepreneurship, environmental dynamism, resources, knowledge management, organizational learning, and strategic planning. This study aims to fully assess how the model of strategic levers of control and dynamic capabilities framework are related, considering all conceptual dimensions and the profile of ITAIPU Binacional employees. The data was collected through a survey, and the hypotheses evaluated with the assistance of structural equation modelling, using the partial least squares estimation method. The findings validated the central hypothesis, that the levers of control do positively influence the presence of the dynamic capabilities, in addition to one other complementary hypothesis- that the interactive system also positively influences the ability to sense opportunities. The strategic levers of control can now be treated by organizations as possible sources of dynamic capabilities. entrepreneurship dynamism resources management learning planning related employees survey modelling method hypothesis opportunities

RESUMO A solução fundamental para o problema do entupimento do emissor é explorar o projeto ideal da estrutura do emissor e melhorar sua capacidade anti-entupimento. O objetivo da pesquisa foi selecionar a forma estrutural ideal do caminho de fluxo do emissor em sistemas de irrigação por gotejamento utilizando fontes de água de qualidade inferior, proporcionando suporte teórico para melhorar a capacidade anti-obstrução do próprio emissor e para o projeto de novos produtos de emissores. A seleção da estrutura do caminho do fluxo do emissor não tem sido conduzida com base na determinação do modelo de simulação apropriado com a condição complexa de qualidade da água. Para tanto, determinou-se o modelo de movimento interno do fluido adequado do emissor, e avaliou-se de forma abrangente o desempenho hidráulico e o desempenho anti-entupimento das cinco estruturas representativas da trajetória de fluxo no país e no exterior, e finalmente determinou-se a estrutura ótima da trajetória de fluxo do emissor. Os resultados da pesquisa indicaram que o modelo RNG k-ε foi o mais adequado para simular a área do fluxo no emissor por meio da análise abrangente da lacuna entre os valores simulados e os valores medidos, da precisão do cálculo e da eficiência computacional. A trajetória de fluxo fractal foi relativamente ótima para o desempenho hidráulico e para o desempenho anti-entupimento. Este estudo pode fornecer suporte teórico para melhorar a própria habilidade anti-obstrução do emissor e o projeto de novo produto de emissor. antientupimento. antientupimento anti entupimento. inferior antiobstrução obstrução emissores tanto determinouse determinou se avaliouse avaliou exterior kε k ε medidos computacional

ABSTRACT The fundamental solution to the problem of emitter clogging is to explore the optimal structure design of emitter and improve its anti-clogging ability. The research objective was to select the optimal structural form of the emitter flow path in drip irrigation systems using inferior water sources, which can provide theoretical support for improving the anti-clogging ability of the emitter itself and designing new emitter products. The selection of the flow path structure of the emitter has not been conducted on the basis of determining the appropriate simulation model with the condition of complex water quality. Therefore, the appropriate internal fluid movement model of the emitter was determined, the hydraulic performance and anti-clogging performance of the five nationally and internationally representative flow path structures were comprehensively evaluated, and finally the optimal structure of the emitter flow path was determined. The research results indicated that RNG k - ε model was the most suitable to simulate the flow field in the emitter by comprehensive analysis of the gap between simulated values and the measured values, the calculation accuracy and computational efficiency. The fractal flow path was relatively optimal for hydraulic performance and for anti-clogging performance. This study can provide theoretical support for improving the anti-clogging ability of the emitter itself and the design of the new emitter product. anticlogging anti sources products quality Therefore determined evaluated efficiency product

RESUMO Na agricultura irrigada, é comum a aplicação de água no solo cultivado sem critério, resultando em uso ineficiente ou não otimizado da água. Em muitos casos, a relação solo-água-planta, bem como as potencialidades e limitações dos sistemas de irrigação são ignoradas. A agricultura irrigada sustentável requer o desenvolvimento de um sistema de monitoramento da umidade do solo que evite a perda de água e melhore a eficiência do uso. O objetivo deste estudo foi desenvolver e avaliar a eficiência de um sistema inteligente de monitoramento da umidade do solo. O sistema é composto por duas estações: a primeira coleta os dados sobre parâmetros de umidade aparente do solo usando sensores, enquanto a segunda transmite esses dados para uma estação de processamento central. O sistema determina precisamente os valores atuais de umidade do solo, permitindo estimar o volume de água de irrigação necessário para atender à demanda hídrica da cultura com base na capacidade de campo. Os resultados da curva de calibração dos sensores indicam que o sistema pode medir com precisão a umidade do solo atual, auxiliando no manejo da irrigação. Para áreas irrigadas em condições de solo não saturado, recomenda-se o uso de tensiômetros devido à sua maior confiabilidade entre a capacidade de campo e o ponto de murcha permanente, garantindo práticas de irrigação mais precisas. critério casos soloáguaplanta, soloáguaplanta planta, planta solo-água-planta ignoradas estações central atual saturado recomendase recomenda se permanente precisas

ABSTRACT Water application to cultivated soil is often done without careful consideration in irrigated agriculture, leading to inefficient or suboptimal water usage. In many instances, the intricate relationship between soil, water, and plants, as well as the potential and limitations of irrigation systems, is overlooked. Sustainable irrigated agriculture necessitates the development of a soil moisture monitoring system that curtails water loss and enhances overall efficiency. This study aimed to develop and assess the efficiency of an intelligent system for monitoring soil moisture. The system comprises two stations: the first collects data on apparent soil moisture parameters using sensors, while the second transmits this data to a central processing station. The system precisely determines current soil moisture values, enabling estimation of the required irrigation water volume to meet the crop’s water demand based on field capacity. Results from the calibration curve of the sensors indicate that the system can measure current soil moisture precisely, aiding in irrigation management. For irrigated areas under unsaturated soil conditions, it is recommended to use tensiometers due to their higher reliability between field capacity and permanent wilting point, ensuring more accurate irrigation practices. usage instances plants systems overlooked stations station values crops crop s management conditions point practices

Resumo A competitividade das empresas do setor de sistemas eletromecânicos de engenharia desempenha um papel fundamental na promoção do crescimento econômico e da inovação. O objetivo deste estudo é desenvolver um índice abrangente para avaliar a competitividade das empresas, com foco na eficiência operacional, posicionamento estratégico e o ambiente internacional. Empregando uma análise fatorial exploratória, os dados foram coletados por meio de um questionário aplicado a 280 empresas em Moscou, Rússia. O índice proposto permite uma avaliação dinâmica da competitividade, permitindo a análise de indicadores-chave ao longo do tempo e prevendo mudanças na competitividade. As conclusões revelam fatores críticos que contribuem para a competitividade no sector, permitindo aos decisores formular estratégias para melhorar a sua posição competitiva. Esta pesquisa fornece informações valiosas para formuladores de políticas, profissionais da indústria e pesquisadores acadêmicos no aumento da competitividade das empresas de sistemas eletromecânicos de engenharia e na promoção do desenvolvimento econômico sustentável. As contribuições do estudo para a literatura e sua relevância prática o tornam um recurso valioso para o público acadêmico e do setor. inovação operacional internacional exploratória 28 Moscou Rússia indicadoreschave indicadores chave sector competitiva políticas sustentável 2

Abstract The competitiveness of enterprises in the electromechanical systems engineering sector plays a crucial role in driving economic growth and innovation. This study aims to design a comprehensive index for evaluating enterprise competitiveness, focusing on operational efficiency, strategic positioning, and the international environment. Employing an exploratory factor analysis, data was collected through a questionnaire administered to 280 enterprises in Moscow, Russia. The proposed index allows for a dynamic assessment of competitiveness, enabling the analysis of key indicators over time and predicting changes in competitiveness. The findings reveal critical factors contributing to competitiveness in the sector, enabling decision-makers to formulate strategies for improving their competitive position. This research provides valuable insights for policymakers, industry practitioners, and academic researchers in enhancing the competitiveness of electromechanical systems engineering enterprises and fostering sustainable economic development. The study's contributions to the literature and its practical relevance make it a valuable resource for academic and industry audiences alike. innovation efficiency positioning environment 28 Moscow Russia decisionmakers decision makers position policymakers practitioners development studys s alike 2

RESUMO A deposição adequada de sementes tem grande importância na uniformidade da emergência e no desenvolvimento inicial das culturas. Uma maior precisão na distribuição longitudinal de sementes é possível com mecanismos dosadores de sementes pneumáticos em relação aos convencionais, mas existem alguns aspectos que afetam essa precisão. Por exemplo, a qualidade física das sementes pode ser impactada pelo seu tratamento fitossanitário, que pode ser feito na propriedade ou na indústria. Nesse contexto, este estudo investigou o impacto do tipo de tratamento fitossanitário e do uso de grafite na deposição de sementes de soja por meio de dosador pneumático com acionamento elétrico em bancada estática, simulando a semeadura e monitorando a distribuição das sementes com sensor óptico. As sementes foram submetidas a quatro tratamentos distintos: sem grafite, sem tratamento com adição de grafite, tratamento on-farm com adição de grafite e tratamento industrial com adição de grafite. Foram estudados o espaçamento médio entre deposições, coeficiente de variação de semeadura, índice de precisão, espaçamentos múltiplos e falhas e percentual de espaçamento aceitável. Os resultados indicam que o espaçamento adequado no plantio não é significativamente impactado pelo método de tratamento prévio das sementes. O espaçamento entre sementes diferiu entre os tratamentos sem grafite e pelo tratamento on-farm, sendo este último mais próximo do ótimo e o tratamento sem grafite mais distante do espaçamento ideal. Um coeficiente de variação de semeadura mais baixo indica que a deposição uniforme foi alcançada com os procedimentos on-farm e industriais. Independentemente do tratamento de sementes, o dosador pneumático demonstrou eficácia. culturas convencionais exemplo indústria contexto estática óptico distintos onfarm on farm deposições aceitável onfarm, farm, ideal industriais eficácia

ABSTRACT Adequate seed placement is essential for consistent crop emergence and initial growth. Pneumatic seed metering systems offer superior longitudinal seed distribution accuracy compared to traditional methods, yet certain factors can influence this precision. For instance, seed physical properties may be altered by phytosanitary treatments applied either on-farm or industrially. This study examined the effects of phytosanitary treatment type and graphite addition on soybean seed deposition using an electric-driven pneumatic feeder under simulated sowing conditions. Seed distribution was monitored with an optical sensor. Four treatment groups were established: untreated without graphite, untreated with graphite added, on-farm treated with graphite, and industrially treated with graphite. Parameters assessed included average spacing between seeds, coefficient of variation, precision index, multiple and failed spacings, and percentage of acceptable spacing. Results indicate that prior seed treatment does not significantly affect overall planting accuracy. However, seed spacing varied between the untreated and on-farm treated groups, with the latter demonstrating closer proximity to optimal values. Both on-farm and industrial treatments yielded more uniform seed deposition, as indicated by a lower coefficient of variation. Regardless of seed treatment, the pneumatic feeder consistently performed effectively. growth methods instance onfarm farm electricdriven electric driven conditions sensor established added seeds variation index spacings However values effectively