We report a facile hydrothermal method for the synthesis of niobium pentoxide (Nb2O5) under two different temperatures, 120 °C (Nb2O5-120) and 150 °C (Nb2O5-150). The obtained materials were characterized by structural, optical and morphological techniques. Also, the photocatalytic properties of the Nb2O5 samples were evaluated in two reactions under ultraviolet (UVC) irradiation: degradation of methylene blue (MB) and indigo carmine (IC) dyes; and esterification of free fatty acids (FFA) present in waste cooking oil (WCO). The Nb2O5 was formed at different temperatures of synthesis, and the increase in temperature did not cause significant changes in the structural and optical characteristics, but resulted in an increased surface area of the synthesized materials. Both synthesized materials showed excellent efficiency for dye photodegradation. The sample Nb2O5-150 presented the best performance for the MB photodegradation, with almost 85% of the removal efficiency. In this case, the adsorption of MB molecules on the surface of the material was high due to the favorable electrostatic interaction and also because of its high surface area. For the IC photodegradation, the adsorption was insignificant, and both samples presented approximately 100% of the removal efficiency. These materials were also promising for the reduction of free fat acids in waste oil by photoesterification. NbO Nb O (Nb2O5 12 C Nb2O5120 (Nb2O5-120 15 Nb2O5150. Nb2O5150 . (Nb2O5-150) techniques Also Nb2O UVC (UVC irradiation (MB (IC dyes FFA (FFA WCO. WCO (WCO) characteristics photodegradation Nb2O5-15 85 case insignificant 100 photoesterification (Nb2O 1 Nb2O512 (Nb2O5-12 Nb2O515 (Nb2O5-150 (WCO Nb2O5-1 8 10 Nb2O51 (Nb2O5-1 (Nb2O5-15 Nb2O5- (Nb2O5-

The acetalization or transacetalization reactions produce acetals or ketals used in cosmetics, food, pharmaceuticals, and fuel additives. Besides synthesizing several products, the acetalization or transacetalization reactions can protect carbonyl groups, 1,2 and 1,3-diols in multi-step synthesis. This work studies the transacetalization of glycerol with 2,2-dimethoxypropane (2,2-DMP) to yield 2,2-dimethyl-4-hydroxymethyl-1,3-dioxolane (solketal) by catalyzing with USY, HBeta, and HZSM-5 zeolites under cleaner and mild reaction conditions (reaction temperature: 25 °C; 2,2-DMP/glycerol molar ratio: 1; reaction time: 1 h; and catalyst concentration: 0.05-5 wt.%). For catalyst concentration equal to or greater than 2,5 wt.%, glycerol conversion stabilized near 96-97% for the three zeolites tested. The product selectivities also assume a constant value, close to 97% for solketal. For the lowest concentration of catalyst, the influence of the zeolite properties on the glycerol conversion, such as acidity and the strong/weak acid site ratio, was observed. Concerning the selectivity of the products, the results suggested that it can be based on zeolite topology, active sites at the particle surface, and the relative amount of micro and mesoporous HBeta, the most selective catalyst for acetals production, was reused at least once without loss of activity and selectivity. cosmetics food pharmaceuticals additives products groups 12 2 1, 1,3diols 13diols diols 1,3 3 multistep multi step synthesis 2,2dimethoxypropane 22dimethoxypropane dimethoxypropane 2,2 2,2DMP 22DMP DMP (2,2-DMP 2,2dimethyl4hydroxymethyl1,3dioxolane 22dimethyl4hydroxymethyl13dioxolane dimethylhydroxymethyldioxolane dimethyl 4 hydroxymethyl dioxolane solketal (solketal USY HBeta HZSM5 HZSM 5 HZSM- temperature °C C 2,2DMP/glycerol 22DMPglycerol DMPglycerol DMP/glycerol ratio time h 0.055 0055 0.05 0 05 0.05- wt.%. wt wt.% . wt.%) 2, 9697% 9697 96 97 96-97 tested value strongweak strong weak observed topology surface production 3diols 13 2dimethoxypropane 22 2DMP 2dimethyl4hydroxymethyl1 3dioxolane 055 005 0.0 wt. 969 9 96-9 dimethylhydroxymethyl 2dimethyl4hydroxymethyl 00 0. 96-

In the Amazon, Euterpe oleracea Mart. (açaí), is part of the identity of traditional communities, and the fruit is integrated into their everyday sociocultural dynamics. Hydrolysis and pyrolysis of residual biomass can be alternatives to yield sugars, ethanol, biochar and bio-oil. The açaí seeds subjected to oxidative pretreatment followed by acid hydrolysis increased cellulose to fermentable sugars (reaching 23.5%) and second-generation ethanol production (17.441 L t−1). Açaí oil (ca. 30%) was extracted using a Soxhlet apparatus (using hexane as solvent) and detected through gas chromatography coupled to mass spectrometry (GC-MS), where acids accounted for 82.43% of the total composition, while alcohols comprised only 13.15%. For pyrolysis, temperatures (500 and 550 °C), time (20 and 30 min), and activation temperature (750 and 800 °C) were evaluated, resulting in yields of ca. 22% for biochar and 30% for bio-oil. For the bio-oil, the main compounds detected by GC-MS were acids (16.3%), aldehydes (13.08%), amides (12.19%), alcohols (6.72%), and phenols (4.64%). The obtained biochar displayed surface area values of 553.7 m2 g−1 and 10% crystallinity, indicating its more amorphous nature. Amazon Mart açaí, , (açaí) communities dynamics biooil. biooil bio oil. bio-oil reaching 23.5% 235 23 5 secondgeneration second generation 17.441 17441 17 441 (17.44 t−1. t1 t t−1 . 1 t−1) ca (ca solvent GCMS, GCMS GC MS (GC-MS) 8243 82 43 82.43 composition 1315 13 15 13.15% 500 (50 55 °C, C °C 20 (2 3 min, min min) 750 (75 80 evaluated 22 biooil, oil, 16.3%, 163 16.3% 16 (16.3%) 13.08%, 1308 13.08% 08 (13.08%) 12.19%, 1219 12.19% 12 19 (12.19%) 6.72%, 672 6.72% 6 72 (6.72%) 4.64%. 464 4.64% 4 64 (4.64%) 5537 553 7 553. m g1 g g− 10 crystallinity nature (açaí 23.5 2 17.44 1744 44 (17.4 t− (GC-MS 824 8 82.4 131 13.15 50 (5 ( 75 (7 16.3 (16.3% 130 13.08 0 (13.08% 121 12.19 (12.19% 67 6.72 (6.72% 46 4.64 (4.64% 23. 17.4 174 (17. 82. 13.1 16. (16.3 13.0 (13.08 12.1 (12.19 6.7 (6.72 4.6 (4.64 17. (17 13. (16. (13.0 12. (12.1 6. (6.7 4. (4.6 (1 (16 (13. (12. (6. (4. (13 (12 (6 (4

Gold and platinum bimetallic nanoparticles, Au@PtNPs, have gained attention due to their plasmonic properties. The controlled synthesis of Au@PtNPs involves complex parameters, and the resulting synergy between Au and Pt introduces possibilities for tailoring their properties. This study explores the effects of key-parameters of synthesis (gold core diameters, reaction time, and Pt concentration) on the final properties of Au@PtNPs. Gold nanoparticles of varying diameters were synthesized and used as cores for the reduction of hexachloroplatinic acid, forming a surrounding shell of Pt nanoparticles. The parameters were systematically tuned to understand their impact on morphology, dimension, stability, and plasmonic properties of Au@PtNPs. Increasing Pt precursor concentration resulted in thicker and denser Pt shells, broadening the localized surface plasmon resonance (LSPR) band and improving Au@PtNPs stability. These properties are essential for applications such as photothermal treatment. The synthesis achieved satisfactory products within just 1 h of Pt4+ reduction at mild temperature without using surfactants. Only limited changes in plasmonic properties were observed after 4 h of synthesis, suggesting an optimal reaction period. Manipulating Au core diameter provided LSPR band control, with smaller cores exhibiting greater broadening towards the infrared region. This systematic exploration provided valuable insights for understanding key-parameters governing the synthesis and properties of Au@PtNPs. AuPtNPs PtNPs keyparameters key gold time acid morphology dimension stability shells (LSPR treatment Pt4 surfactants period control region

Novel nanocomposites synthesized with pollen grain, as a precursor, were tested for CO2 adsorption performance. The pollen-derived carbons were obtained by direct calcination (PC), calcination followed by KOH-chemical activation (PCKOH), and MgO incorporation using high-energy ball-milling (PC-MgO and PCKOH-MgO). All the as-prepared materials were texturally, morphologically and structurally characterized by N2 physisorption, scanning electron microscopy (SEM-EDS) and X-ray diffraction (XRD); CO2 adsorption/desorption was measured by thermogravimetry. The four materials were able to adsorb CO2 at 30 ºC and 1 bar, but PCKOH-MgO, with the high surface area (12.4 m2 g-1), total pore volume of (0.13 cm3 g-1) and microporosity, was the best (2.06 mmol g-1 and percentage of adsorption (Qad) = 9.06%, at 1 bar). This result is due to the synergic effect of both synthesis methods. Neither temperature (from 30 to 100 ºC), nor pressure (from 1 to 15 bar), improved the adsorption process of PCKOH-MgO. CO2 desorption times at 300 ºC were 47 min for PCKOH-MgO and 30 min for the other adsorbents, showing the possibility of cycling. Based on the obtained results, the PCKOH-MgO activated carbon nanocomposite stands as a promising adsorbent to be potentially used for industrial CO2 capture applications and to contribute to long-term solutions to avoid dangerous climate-change and reduce CO2 emissions. grain precursor CO performance pollenderived derived PC, PC , (PC) KOHchemical KOH chemical PCKOH, PCKOH (PCKOH) highenergy energy ballmilling ball milling PCMgO PCKOHMgO. PCKOHMgO . PCKOH-MgO) asprepared prepared texturally N physisorption SEMEDS SEM EDS (SEM-EDS Xray X ray XRD (XRD) adsorptiondesorption thermogravimetry 3 bar PCKOHMgO, MgO, 12.4 124 12 4 (12. m g1, g1 g 0.13 013 0 13 (0.1 cm microporosity 2.06 206 2 06 (2.0 g- Qad (Qad 906 9 9.06% bar. bar) methods from 10 ºC, ºC) MgO. adsorbents cycling results longterm long term climatechange climate change emissions (PC (PCKOH (XRD 12. (12 0.1 01 (0. 2.0 20 (2. 90 9.06 (1 0. (0 2. (2 9.0 ( 9.

RESUMO: Entender aspectos da germinação de sementes de espécies nativas do Cerrado pode auxiliar na escolha de espécies a serem utilizadas na restauração de ecossistemas degradados. Portanto, o estudo teve como objetivo verificar o efeito de cápsulas biodegradáveis na germinação de sementes de três espécies arbóreas típicas de fisionomias florestais do Cerrado (Enterolobium contortisiliquum, Anadenanthera colubrina e Dipteryx alata). O experimento foi conduzido em casa de vegetação, com dois tratamentos: semeadura no interior de cápsulas biodegradáveis e semeadura direta na superfície do substrato. Duas sementes de cada espécie foram utilizadas por tratamento, as quais foram acomodadas em sacos plásticos com substrato arenoso oriundo da classe Neossolo Quartzarênico. Para cada tratamento, foram utilizados cinco blocos (repetições), com 20 sacos plásticos cada. A casa de vegetação teve condições controladas de temperatura e umidade relativa. Dentro das cápsulas, os resultados mostraram que as sementes de baru, angico-branco e tamboril apresentaram germinação de 97%, 42% e 12%, respectivamente. Por outro lado, na semeadura direta, a germinação foi de 15% para baru, 21% para angico-branco e 8% para tamboril. Os resultados indicam que o uso de cápsulas biodegradáveis favorece a germinação das espécies do Cerrado estudadas. Assim, tanto a utilização das cápsulas quanto as espécies elencadas são recomendadas em projetos de restauração ecológica. RESUMO degradados Portanto Enterolobium contortisiliquum alata. alata . alata) tratamentos tratamento Quartzarênico repetições, repetições , (repetições) 2 relativa baru angicobranco angico branco 97 97% 42 12 12% respectivamente lado 15 21 8 estudadas Assim ecológica (repetições 9 4 1

ABSTRACT: A good grasp of the different facets of seed germination of the plant species native to the Cerrado will facilitate the selection of species that can be used to restore degraded ecosystems. Hence, the objective of the current study was to confirm the ways biodegradable capsules affect the germination of the seeds of three tree species typical of the physiognomies of the Cerrado forest (Enterolobium contortisiliquum, Anadenanthera colubrina and Dipteryx alata). The experiments, conducted in a greenhouse, included two treatments: seeding performed inside biodegradable capsules and direct seeding on the substrate surface. Two seeds from each of the species were sown in plastic bags containing the Quartzarenic Neosol class of substrates. Using five replicates for each treatment resulted in 20 plastic bags for each. The greenhouse conditions included controlled temperature and relative humidity. Inside the capsules, the findings revealed that the baru, angico-branco and tamboril seeds germinated at the rates of 97%, 42%, and 12%, respectively. However, during direct seeding, germination rates for baru, angico-branco and tamboril were 15%, 21% and 8%. From the findings, it is evident that when biodegradable capsules are used, the germination of all three Cerrado species investigated is favoured. Thus, both capsules and the cited species can be recommended for projects of ecological restoration. ABSTRACT ecosystems Hence Enterolobium contortisiliquum alata. alata . alata) experiments treatments surface substrates 2 humidity baru angicobranco angico branco 97 97% 42 42% 12 12% respectively However 15 15% 21 8 8% favoured Thus restoration 9 4 1

Silver film is commonly used to examine the structure and composition of molecules due to its surface-enhanced Raman scattering (SERS) effect. A simple method for preparing SERS silver films is proposed in this paper by electrodeposition in an amide-based liquid mixture (urea-acetamide-LiBr). The electrochemical behavior of silver in urea-acetamide-LiBr mixture was studied by cyclic voltammetry (CV) and chronoamperometry. It was found that the nucleation mechanism of silver shifts to instantaneous nucleation under diffusion control with increasing overpotential and temperature. The energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) investigations confirmed that the obtained deposits are pure silver. Scanning electron microscopy (SEM) analysis showed that the morphology of the silver deposits depends on the deposition potential and temperature. Rhodamine 6G was used as probe molecules for SERS experiments, showing that these new active substrates have high sensitivity to SERS response with high enhancement factors, of approximately 107, and enable Raman scattering even for diluted solutions. surfaceenhanced surface enhanced (SERS effect amidebased amide based ureaacetamideLiBr. ureaacetamideLiBr urea acetamide LiBr . (urea-acetamide-LiBr) CV (CV chronoamperometry temperature EDS (EDS Xray X ray XRD (XRD SEM (SEM G experiments factors 107 solutions (urea-acetamide-LiBr 10 1

The recycle and utilization of expired drugs is a challenge for many countries at present. The employment of expired drugs as green corrosion inhibitors is expected to address both drug recycling and corrosion prevention issues, with significant economic and environmental value. Herein, the individually and combination corrosion inhibition performance of expired amoxicillin (AMC) and penicillin V potassium tablets (PVP) for lowcarbon steel in 20% acetic acid solution containing 600 mg L-1 chloride ion are evaluated by electrochemistry and weight loss method. Both the AMC and PVP present the mixed-type corrosion inhibitors mainly affect the cathode process when used individually. The optimum inhibition efficiency is 61.22% (AMC) and 79.21% (PVP), which all appear in 5.0 × 10-3 mol L-1. The AMC and PVP are adsorbed on the steel surface by mixed physisorption and chemisorption, which are consistent with the Langmuir adsorption isotherm. The corrosion inhibition rate drops sharply when AMC and PVP are combined use with a close mole ratio. But a small amount of PVP significantly enhance the corrosion inhibition effect of AMC, the corrosion inhibition rate from 61.22 to 79.72%. The corrosion inhibition rate of AMC and PVP combination inhibitor decreased with the increase of temperature. issues value Herein (AMC (PVP 20 60 L1 L 1 L- method mixedtype type 6122 61 22 7921 79 21 79.21 PVP, , 50 5 0 5. 103 10 3 10- L1. 1. chemisorption isotherm ratio 61.2 7972 72 79.72% temperature 2 6 612 792 7 79.2 61. 797 79.72 79. 79.7

Abstract This study investigated the effects caused by the thermal shock phenomenon on the temperature distribution in Adhered Ceramic Tiling Systems (ACTS). Cyclic thermal and hygroscopic loads are periodic events resulting from successive and sequential processes of heating by solar irradiation and sudden cooling by heavy rains. Through an experimental program carried out in a ceramic tile prototype composed of porcelain tiles settle with adhesive mortar directly on a concrete wall, monitored the surface temperatures and temperatures at the adhesive mortar-concrete interface were measured during its exposure to heating and cooling cycles according to NBR 15575-4 (ABNT, 2021) procedures. The confinement of thermal energy (heat) inside the structure, after the beginning of cooling, demonstrates that part of the thermal stresses is maintained internally to the structure even after the drop-in surface temperature of the ceramic tile (non-homogeneous distribution), indicating that the movements structural elements of thermal origin will tend to different directions (non-uniform) and, consequently, will cause opposite stresses between layers. This results in a possible increase and concentration of stresses in certain regions that, if critical, will lead to the appearance of damage in the ceramic coating. ACTS. ACTS . (ACTS) rains wall mortarconcrete 155754 15575 4 15575- ABNT, ABNT (ABNT 2021 procedures heat (heat dropin drop nonhomogeneous non homogeneous distribution, , distribution) nonuniform uniform (non-uniform consequently layers critical coating (ACTS 1557 202 155 20 15 2 1

Resumo O estudo investigou os efeitos causados pelo fenômeno do choque térmico sobre a distribuição de temperatura em sistemas de revestimento cerâmico aderido (SRCA). Carregamentos cíclicos térmicos e higroscópicos são eventos periódicos resultado de processos sucessivos e sequenciais de aquecimento por irradiação solar e resfriamentos bruscos por chuvas. Por meio de um programa experimental realizado em um protótipo de revestimento cerâmico composto de placas de porcelanato assentadas com argamassa colante diretamente sobre uma parede de concreto, monitoraram-se as temperaturas superficiais e na interface argamassa colante-concreto durante sua exposição a ciclos de aquecimento e resfriamento, conforme procedimentos da NBR 15575-4 (ABNT, 2021). O confinamento de energia térmica (calor) no interior da estrutura, após o início do resfriamento, demonstra que parte dos esforços térmicos é mantida internamente à estrutura mesmo após a queda de temperatura superficial da placa cerâmica (distribuição não homogênea), indicando que as movimentações estruturais de origem térmica tenderão a ir em direções diferentes (não uniformes) e, consequentemente, ocasionarão solicitações opostas entre camadas. Isso resulta em possível acréscimo e concentração de tensões em determinadas regiões, que, se críticas, levarão ao surgimento do dano no revestimento cerâmico. SRCA. SRCA . (SRCA) chuvas concreto monitoraramse monitoraram colanteconcreto resfriamento 155754 15575 4 15575- ABNT, ABNT (ABNT 2021. 2021 2021) calor (calor homogênea, homogênea , homogênea) uniformes consequentemente camadas regiões críticas (SRCA 1557 202 155 20 15 2 1

Abstract The present paper evaluated the potential application of the functionally graded material (FGM) concept to develop more durable concrete to carbonation, one of the main degradation mechanisms of reinforced concrete structures. Accelerated carbonation tests with controlled temperature (27 ( 2°C), CO2 concentration (3 ( 0.5%) and humidity (65 ( 5%) were carried out in homogeneous concretes and with functional gradation in which the porosity of the material was varied across the slices. For the manufacture of graded concrete specimens, concretes with water/cement ratios equal to 0.35, 0.45, and 0.55 were produced, with lower porosity (w/c = 0.35) close to the surface of the specimen. The advance of the carbonation front was evaluated after 8, 9, 10, 14, and 24 weeks of accelerated exposure, using the chemical indicator phenolphthalein. The results show that the functionally graded concrete had a carbonation coefficient (K) slightly higher than that of the concrete with a w/c ratio equal to 0.35 (1.71 and 1.54 mm.week-0.5, respectively) and much lower than concrete with water-cement ratio equal to 0.45 (2.31 mm.week-0.5) and 0.55 (3.78 mm.week-0.5). This demonstrates that functional grading can be an efficient method to increase the durability of concrete elements subject to carbonation. FGM (FGM structures 27 (2 2°C, 2C C 2°C , 2 2°C) CO 3 0.5% 05 0 5 65 (6 5% slices specimens watercement water cement 035 35 045 45 055 55 0.5 produced wc w c specimen 8 9 10 14 exposure phenolphthalein K (K 0.3 1.71 171 1 71 (1.7 154 54 1.5 mm.week0.5, mmweek05 mmweek mm.week 0.5, mm week mm.week-0.5 respectively 0.4 2.31 231 31 (2.3 mm.week0.5 3.78 378 78 (3.7 mm.week0.5. . 6 03 04 4 0. 1.7 17 7 (1. 15 1. week0 mmweek0 mm.week-0. 2.3 23 (2. mm.week0. 3.7 37 (3. (1 mm.week-0 2. mm.week0 3. mm.week-

Resumo O presente artigo avalia o potencial de aplicação do conceito de material com gradação funcional (MGF) ao desenvolvimento de concretos mais duráveis frente à carbonatação, um dos principais mecanismos de degradação das estruturas de concreto armado. Ensaios acelerados de carbonatação com temperatura (27 ( 2 °C), concentração de CO 2 (3 ( 0,5%) e umidade (65 ( 5%) controladas foram realizados em concretos homogêneos e com gradação funcional em que a porosidade do material foi variada ao longo dos corpos de prova. Para a confecção dos corpos de prova de concreto com gradação funcional foram utilizados concretos com relações água/cimento iguais a 0,35, 0,45 e 0,55 de forma que tivéssemos uma redução de porosidade à medida que nos aproximássemos da superfície da peça. O avanço da frente de carbonatação foi avaliado após 8, 9, 10, 14 e 24 semanas de exposição acelerada, empregando-se o indicador químico fenolftaleína. A partir dos resultados obtidos observou-se que os concretos com gradação funcional apresentaram coeficiente de carbonatação (K) ligeiramente superior ao do concreto com relação a/c igual a 0,35 (1,71 e 1,54 mm.semana -0,5 , respectivamente) e bastante inferior aos concretos com relação água cimento iguais a 0,45 (2,31 mm.semana -0,5 ) e 0,55 (3,78 mm.semana -0,5 ), evidenciando que a gradação funcional pode ser um método eficiente para proporcionar o aumento da durabilidade de elementos de concreto sujeitos à carbonatação. MGF (MGF armado 27 (2 °C, C °C °C) 3 0,5% 05 0 5 65 (6 5% águacimento 035 35 045 45 0,4 055 55 0,5 peça 8 9 10 1 acelerada empregandose empregando se fenolftaleína observouse observou K (K ac c 0,3 1,71 171 71 (1,7 154 54 1,5 mmsemana mm semana -0, respectivamente 2,31 231 31 (2,3 3,78 378 78 (3,7 6 03 04 4 0, 1,7 17 7 (1, 15 1, -0 2,3 23 (2, 3,7 37 (3, (1 - 2, 3,

Abstract Cracking can be investigated by infrared thermography, as defects on a surface have different temperatures compared to regions without defects. The temperature of the crack depends on its dimensions, opening and depth, which can be identified by thermography. The possibility of classifying crack damage according to different depths by thermography in heating and cooling regimes and indicating which conditions are most suitable for identifying cracks is evaluated. It is proposed to observe the temperature evolution during the heating and cooling of a mortar slab that has cracks with different depths. The temperature variation of the plate during heating and cooling is monitored by thermograms and thermocouples present on the surface and interior of the plate in regions close to the cracks. It is identified, through the application of Delta-T thermographic contrast, that cracks of greater depth have a greater Delta-T, in modulus, during heating, while cracks of shallower depth have a greater Delta-T during cooling. Cracks are best identified during the cooling phase, as shallower cracks are not identified at the end of heating. dimensions evaluated DeltaT Delta T contrast DeltaT, T, modulus phase

Resumo A fissuração pode ser investigada por termografia de infravermelho, pois defeitos em uma superfície apresentam temperaturas diferentes em relação as regiões sem defeito. A temperatura da fissura é dependente das suas dimensões, abertura e profundidade, nas quais podem ser identificadas pela termografia. Avalia-se o comportamento das temperaturas em regime controlado de aquecimento e resfriamento de fissuras em função de diferentes profundidades e quais as condições mais adequadas para identificar as fissuras. Propõe-se a observação da evolução de temperatura no aquecimento e resfriamento de uma placa de argamassa que possui fissuras com diferentes profundidades. A variação de temperatura da placa no aquecimento e resfriamento é monitorada por termogramas e termopares presentes na superfície e interior da placa em regiões próximas às fissuras. Identifica-se, pela aplicação de contraste termográfico Delta-T, que fissuras de maior profundidade possuem maior Delta-T, em módulo, durante o aquecimento, enquanto fissuras de menor profundidade possuem maior Delta-T no resfriamento. As fissuras são melhor identificadas na fase de resfriamento, pois no fim do aquecimento as fissuras de menor profundidade não são identificadas. infravermelho defeito dimensões Avaliase Avalia se Propõese Propõe Identificase, Identificase Identifica se, Identifica-se DeltaT, DeltaT Delta T, T módulo

Abstract Surface Urban Heat Islands (SUHI) are formed through processes that include decreasing vegetation and increasing materials that are more conductive to heat. To investigate this phenomenon, the objective of this work is to comparatively verify the surface temperature and geospatial indicators to analyze environmental variation in the city of São Paulo, Brazil. The study method is remote sensing, with data from the Landsat 8 satellite over a ten-year timeframe. The variables include land cover, the Normalized Difference Vegetation Index (NDVI), the Normalized Difference Built-up Index (NDBI), and land surface temperature (LST), thereby obtaining the Urban Thermal Field Variation Index (UTFVI) and estimating SUHI formation. The results allowed for the presentation of a progression of variables, highlighting the recurrent formation of SUHI in the central and eastern regions of the city of São Paulo, Brazil. Conversely, the southern and extreme northern districts exhibited the best NDVI indices and low LST values. (SUHI heat phenomenon Paulo Brazil sensing tenyear ten year timeframe cover NDVI, , (NDVI) Builtup Built up NDBI, NDBI (NDBI) LST, (LST) UTFVI (UTFVI Conversely values (NDVI (NDBI (LST

Resumo A partir dos processos de diminuição da vegetação e aumento de materiais mais condutivos ao calor há a formação de ilhas de calor de superfície (SUHI, do inglês Surface Urban Heat Island). Com o intuito de investigar o fenômeno, o objetivo deste trabalho é verificar comparativamente a temperatura de superfície (LST, do inglês Land Surface Temperature) e indicadores geoespaciais para análise da variação ambiental na cidade de São Paulo, Brasil. O método do estudo é sensoriamento remoto, com dados provenientes do satélite Landsat 8 em um recorte temporal de dez anos. As variáveis são a cobertura do solo, o Índice de Vegetação por Diferença Normalizada (NVDI, do inglês Normalized Difference Vegetation Index), o Índice de Diferença Normalizada de Áreas Construídas (NDBI, do inglês Normalized Difference Built-up Index) e o LST, obtendo em decorrência o Índice de Variação do Campo Térmico Urbano (UTFVI, do inglês Urban Thermal Field Variation Index) e estimando a formação de SUHI. A partir dos resultados apresentou-se uma progressão das variáveis, destacando a formação recorrente de SUHI na região central e zona leste de São Paulo, Brasil. Em contrapartida, os distritos ao sul e extremo norte apresentaram os melhores índices de NDVI e baixos valores de LST. SUHI, (SUHI Island. Island . Island) fenômeno LST (LST Temperature Paulo Brasil remoto anos solo NVDI, NVDI (NVDI Index, Index , NDBI, NDBI (NDBI Builtup Built up UTFVI, UTFVI (UTFVI apresentouse apresentou se contrapartida

ABSTRACT The feeding habits of the bonito Euthynnus alletteratus and the albacore Thunnus alalunga were assessed by analyzing the contents of 85 stomachs (50 from bonito and 35 from albacore) collected between March 2018 and April 2019. A qualitative and quantitative analysis of the prey found in the stomach contents was conducted, as well as of the trophic spectrum between species and climatic seasons. Climatic information was obtained through satellite images, analyzing variables such as sea surface temperature, salinity, and winds. In terms of abundance, the most representative prey were the fish Sardinella aurita (42.48 %) and Teleostei remains (27.45 %) for E. alletteratus, and Megalopa larvae (56.89 %) and Teleostei remains (10.26 %) for T. alalunga. The relative importance index indicates that the main prey for E. alletteratus were Teleostei remains (IRI = 1460.65) and Sardinella aurita (IRI = 1179.70), while, for T. alalunga they were megalopa larvae (IRI = 1367.19) and Teleostei remains (IRI = 840.94). These large pelagic predators were classified as generalists, with a low prey diversity in their stomach content. No trophic overlap was observed between the two species.

RESUMEN Se evaluaron los hábitos alimentarios del bonito Euthynnus alletteratus y la albacora Thunnus alalunga a partir del análisis de los contenidos de 85 estómagos (50 de bonito y 35 de albacora) recolectados entre marzo de 2018 y abril de 2019. Se realizó un análisis cualitativo y cuantitativo de las presas encontradas en dichos estómagos, así como del espectro trófico entre especies y temporadas climáticas. La información climática se obtuvo a través de imágenes satelitales, analizando variables como la temperatura superficial del mar, la salinidad y los vientos. En términos de abundancia, las presas más representativas fueron el pez Sardinella aurita (42.48 %) y restos de Teleostei (27.45 %) para E. alletteratus, y larvas megalopa (56.89 %) y restos de Teleostei (10.26 %) para T. alalunga. El índice de importancia relativa indica, como presas principales, a restos de Teleostei (IRI = 1460.65) y Sardinella aurita (IRI = 1179.70) para E. alletteratus, y a larvas megalopa (IRI = 1367.19) y restos de Teleostei (IRI = 840.94) para T. alalunga. Estos grandes depredadores pelágicos fueron catalogados como generalistas, con baja diversidad de presas en el contenido estomacal, y no se observó solapamiento trófico entre las dos especies.

Resumen: Las Reservas Ecológicas, son la base primordial para la subsistencia de la biodiversidad, desempeñan funciones cruciales para el mantenimiento de los ecosistemas, especialmente, en la preservación de los servicios ecosistémicos de regulación del clima y suministro de agua. Determinar la capacidad de acumulación del COS en tres ecosistemas de la Reserva Ecológica Arenillas (REAR) y la influencia que tienen con los factores de profundidad y el tipo de suelo, fue el objetivo de la investigación. Se partió de la hipótesis que dichos factores ejercen un efecto sobre las propiedades físicas-químicas del suelo, provocando la variabilidad del carbono. Se establecieron 14 unidades de muestreo para los tres ecosistemas; 1) Intervenido, 2) Bosque deciduo y 3) Bosque arbustal deciduo, se extrajo de cada unidad dos muestras de suelo a profundidades de (0-10 y 10-30 cm), dando un total de 28 muestras. Los resultados revelaron diferencias significativas entre los tres tipos de ecosistemas, permitiendo afirmar que, en la REAR, el contenido de COS es mayor en el ecosistema de Bosque deciduo, que en los denominados Bosque arbustal deciduo y la zona Intervenida. Así mismo, los suelos del tipo Alfisol y Entisol en el Bosque deciduo presentaron la mayor capacidad de almacenamiento de COS, siendo la capa superficial la de mayor acumulación en los tres ecosistemas. Se concluyó que las bajas precipitaciones, el aumento de la temperatura y la esporádica vegetación producida por actividades antrópicas, afectan el almacenamiento de COS, limitando la prestación de servicios ecosistémicos relacionados con la captura de carbono edáfico.

Abstract: Ecological Reserves are the primary basis for the subsistence of biodiversity, they play crucial roles in the maintenance of ecosystems, especially in the preservation of ecosystem services of climate regulation and water supply. The objective of the research was to determine the accumulation capacity of COS in three ecosystems of the Arenillas Ecological Reserve (REAR) and the influence of depth factors and soil type. It was hypothesized that these factors exert an effect on the physical-chemical properties of the soil, causing carbon variability. Fourteen sampling units were established for the three ecosystems; 1) Intervened, 2) Deciduous Forest and 3) Deciduous shrub forest, two soil samples were extracted from each unit at depths of (0-10 and 10-30 cm), giving a total of 28 samples. The results revealed significant differences between the three types of ecosystems, allowing us to affirm that, in the REAR, the COS content is higher in the deciduous forest ecosystem than in the deciduous shrub forest and the Intermediate zone. Likewise, Alfisol and Entisol soils in the deciduous forest had the highest COS storage capacity, being the surface layer the one with the highest accumulation in the three ecosystems. It was concluded that low precipitation, increased temperature and sporadic vegetation produced by anthropic activities affect COS storage, limiting the provision of ecosystem services related to soil carbon sequestration.

Abstract Background: Cryotherapy is used during the postoperative phase of total knee arthroplasty to reduce pain, inflammation, blood loss, cell metabolism, and edema. The therapeutic effects of cryotherapy are achieved when skin surface temperatures are at or below 15ºC. Objective: To determine the effect of cryotherapy on the skin surface temperature of a knee undergoing total knee arthroplasty using different interfaces. Methodology: A 1X4X6 quasi-experimental and factorial study was conducted, comparing one modality of cryotherapy (ice bag), four interfaces (Robert Jones-type bandage, tubular mesh bandage, thin pillowcase-type cloth, and non-woven compress), and six periods of cryotherapy administration (10, 20, 30, 40, 50, and 60 minutes) on a knee undergoing total knee arthroplasty. The sample consisted of 60 participants randomly assigned to one of the four experimental groups (interfaces). A total of 720 cryotherapy treatments were administered. Results: There was no decrease in skin surface temperature to therapeutic levels in any of the experimental groups. The mean values obtained were: Robert Jones-type bandage = 34.13ºC; tubular mesh bandage = 23.90ºC; thin pillowcase-type cloth = 22.84ºC, and non-woven compress = 21.92ºC. Conclusion: Under the experimental conditions studied, cryotherapy had no therapeutic effect.

Resumo Enquadramento: A crioterapia é utilizada no pós-operatório da artroplastia total (AT) do joelho, visando a diminuição da dor, processo inflamatório, perda sanguínea, metabolismo celular e contenção do edema. A crioterapia obtém efeitos terapêuticos para valores de temperatura superficial cutânea (TempSC) ≤ 15ºC. Objetivo: Avaliar o efeito da crioterapia, utilizando diferentes interfaces, sobre a TempSC do joelho da pessoa submetida a AT. Metodologia: Estudo quase-experimental, fatorial 1X4X6: uma modalidade de crioterapia (saco gelo) versus quatro interfaces - ligadura Robert Jones (LRJ), malha tubular (MT), pano fino (PF) e compressa não-tecido (CNT) - versus seis tempos de aplicação da crioterapia (10, 20, 30, 40, 50 e 60 minutos). A amostra, de conveniência, inclui 60 participantes, com distribuição aleatória por quatro grupos experimentais (interfaces). Foram realizadas 720 aplicações de crioterapia. Resultados: Em nenhum grupo experimental foi observado descida da TempSC para valores terapêuticos, obtendo-se as seguintes médias: LRJ = 34,13ºC; MT = 23,90ºC; PF = 22,84 ºC e CNT = 21,92ºC. Conclusão: Nas condições experimentais em estudo, a crioterapia não obteve efeito terapêutico.

Resumen Marco contextual: La crioterapia se utiliza en el posoperatorio de la artroplastia total (AT) de rodilla para reducir el dolor, la inflamación, la pérdida de sangre, el metabolismo celular y la contención del edema. La crioterapia consigue efectos terapéuticos para valores de temperatura de la superficie cutánea (TempSC) ≤ 15ºC. Objetivo: Evaluar el efecto de la crioterapia utilizando diferentes interfaces sobre la TempSC de la rodilla de la persona sometida a una AT. Metodología: Estudio casiexperimental, factorial 1X4X6, una modalidad de crioterapia (bolsa de hielo) frente a cuatro interfaces - vendaje Robert Jones (LRJ), malla tubular (MT), tela fina (PF) y compresa no tejida (CNT) - frente a seis tiempos de aplicación de la crioterapia (10, 20, 30, 40, 50 y 60 minutos). La muestra de conveniencia incluyó 60 participantes, asignados aleatoriamente a cuatro grupos experimentales (interfaces). Se realizaron 720 aplicaciones de crioterapia. Resultados: En ninguno de los grupos experimentales se produjo un descenso de la TempSC para valores terapéuticos y se obtuvieron las siguientes medias: LRJ = 34,13ºC; MT = 23,90ºC; PF = 22,84 ºC y CNT = 21,92ºC. Conclusión: En las condiciones experimentales estudiadas, la crioterapia no tuvo ningún efecto terapéutico.