In this work, a miniaturized version of the QuEChERS (quick, easy, cheap, effective, rugged, and safe) method was optimized, validated, and applied for extracting eight pesticide residues in anuran liver tissue samples. The extracts were quantified by high-performance liquid chromatography with diode array detection, and the detected residues in liver tissue samples were identified by tandem mass spectrometry-liquid chromatography. The optimized extraction method entailed the scale reduction of the QuEChERS method twenty times using 500 mg of liver tissue sample, 200 mg Mg2SO4, 50 mg NaCl, 1.5 mL of acetonitrile, and a mixture of 25 mg C18 + 25 mg PSA (primary-secondary amine) as dispersive solid-phase extraction sorbent. The method was validated using liver tissue samples spiked at two levels of pesticide concentrations according to the SANTE/11312/2021 document. Recoveries ranged from 91-110% with a relative standard deviation < 20%. The method robustness assessed by the Steiner and Youden test resulted in recovery rate variations of less than 2% for all pesticides after deliberated changes in seven variables. The validated method was applied to 72 liver tissue samples from two anuran species, registering residues of some pesticides in 31 samples. The proposed method proved to be efficient, precise, and robust for determining pesticide residues in anuran liver tissues. work quick, quick (quick easy cheap effective rugged safe highperformance high performance detection spectrometryliquid spectrometry sample 20 Mg2SO4 MgSO Mg SO 5 NaCl 15 1 1. acetonitrile 2 C C1 primarysecondary primary secondary amine solidphase solid phase sorbent SANTE113122021 SANTE 11312 2021 SANTE/11312/202 document 91110% 91110 91 110% 110 91-110 20% variables 7 species 3 efficient precise tissues Mg2SO SANTE11312202 1131 202 SANTE/11312/20 9111 9 11 91-11 SANTE1131220 113 SANTE/11312/2 911 91-1 SANTE113122 SANTE/11312/ 91- SANTE11312 SANTE/11312 SANTE1131 SANTE/1131 SANTE113 SANTE/113 SANTE11 SANTE/11 SANTE1 SANTE/1 SANTE/

This study expands and shows the versatility of applications in hydrophilic interaction chromatography coupled with triple quadrupole mass spectrometry (HILIC-MS/MS) using a FRULIC-N column to determine 31 phenolic compounds in beverage industry residues (coffee, apple juice, beer, and wine). Optimization, via Doehlert design, determined the acetonitrile proportion (50-90%) and pH (3.0-7.0) in the mobile phase (MP). A 22 factorial design assessed the concentration of ammonium acetate (10-110 mmol L-1) in the MP and column temperature (20-60 °C). Injection volume (5-45 µL) was univariately optimized. Separations at 60 °C reduced chromatographic run time to less than 11 min. Gradient elution (500 µL min-1) employed an MP comprising acetonitrile and ammonium acetate (110 mmol L-1, pH 7). Validation demonstrated average coefficient of determination (R2) 0.9707, limit of detection 0.001-0.503 mg L-1 and quantification 0.004-1.524 mg L-1, precision < 12.2%, recovery 92.4-110.8%. The method was applied to five residues, indicating its viability for determining phenolics in beverage production residues. HILICMS/MS HILICMSMS HILIC MS/MS MS (HILIC-MS/MS FRULICN FRULIC N 3 coffee, coffee (coffee juice beer wine. wine . wine) Optimization 5090% 5090 50 90% 90 (50-90% 3.07.0 3070 3.0 7.0 0 7 (3.0-7.0 MP. (MP) 2 10110 10 110 (10-11 L1 L 1 2060 20 (20-6 °C. C °C) 545 5 45 (5-4 optimized 6 min 500 (50 min1 min-1 (11 L1, 1, 7. 7) R2 R (R2 09707 9707 0.9707 0.0010.503 00010503 0.001 0.503 001 503 0.001-0.50 L- 0.0041.524 00041524 0.004 1.524 004 524 0.004-1.52 122 12 12.2% 92.4110.8%. 9241108 92.4 110.8%. 92 4 8 92.4-110.8% HILICMS MSMS 509 9 (50-90 07 3.07. 307 30 3. 70 (3.0-7. (MP 1011 (10-1 206 (20- 54 (5- (5 min- (1 (R 0970 970 0.970 0010 0.0010.50 0001050 0001 0.00 0503 0.50 00 0.001-0.5 0041 0.0041.52 0004152 0004 1524 1.52 52 0.004-1.5 12.2 4110 92.4110.8% 924110 924 92. 1108 110.8% 92.4-110.8 (50-9 3.07 (3.0-7 101 (10- (20 ( 097 97 0.97 0.0010.5 000105 000 0.0 050 0.5 0.001-0. 0.0041.5 000415 152 1.5 0.004-1. 12. 411 92.4110.8 92411 110.8 92.4-110. (50- (3.0- (10 (2 09 0.9 0.0010. 00010 0. 05 0.001-0 0.0041. 00041 15 1. 0.004-1 41 92.4110. 9241 110. 92.4-110 (3.0 0.0010 0.001- 0.0041 0.004- 92.4110 92.4-11 (3. 92.411 92.4-1 (3 92.41 92.4-

Methods used to determine pesticide residues in teas typically require several laborious steps for sample preparation before analysis. In this study, a simple method based on solid-liquid extraction with low-temperature partitioning (SLE/LTP) and analysis by gas chromatography coupled to mass spectrometry (GC-MS) was optimized and validated for the determination of pesticide residues (pirimiphos-methyl, flutriafol, cyproconazole, and bifenthrin) in dehydrated green tea leaves. After low-temperature partitioning (LTP), the extract in acetonitrile was subjected to a clean-up step using primary secondary amine (PSA) and octadecylsilane (C18) as sorbents for chlorophyll removal. The optimized SLE/LTP-GC-MS method was validated, and it proved to be effective and selective for extracting pesticides from green tea samples, presenting limit of detection (LOD) and limit of quantification (LOQ) of 0.015 and 0.050 mg kg-1, respectively. Recovery ranged between 81-111%, coefficients of variation were less than 16% and coefficients of determination (R2) were greater than 0.990. The optimized and validated method was applied to green tea and 13 other tea varieties sampled in South and Southeast regions of Brazil. The pesticides under study were detected in some of those samples at values higher than the maximum residue limits (MRLs) allowed by the European Union. solidliquid solid liquid lowtemperature low temperature SLE/LTP SLELTP SLE LTP (SLE/LTP GCMS GC MS (GC-MS pirimiphosmethyl, pirimiphosmethyl pirimiphos methyl, methyl (pirimiphos-methyl flutriafol cyproconazole bifenthrin leaves LTP, , (LTP) cleanup clean up PSA (PSA C18 C (C18 removal SLE/LTPGCMS SLELTPGCMS LOD (LOD LOQ (LOQ 0015 0 015 0.01 0050 050 0.05 kg1, kg1 kg 1, 1 kg-1 respectively 81111%, 81111 81 111%, 111 81-111% 16 R2 R (R2 0990 990 0.990 Brazil MRLs (MRLs Union (LTP C1 (C1 LTPGCMS 001 01 0.0 005 05 kg- 81111% 8111 8 111% 11 81-111 (R 099 99 0.99 (C 00 0. 811 81-11 09 9 0.9 81-1 81-

RESUMO A estruvita (NH4MgPO4∙6H2O) é um fertilizante de liberação lenta obtido através da recuperação de fósforo e/ou nitrogênio de águas residuais geralmente pela adição de sais de magnésio. Neste sentido, objetivou-se avaliar a viabilidade da substituição de fontes comerciais de magnésio por fontes alternativas no processo de precipitação de estruvita, em termos de remoção de amônio e fosfato, e quantificação e caracterização do cristal precipitado. Os experimentos foram conduzidos em escala de bancada sob delineamento inteiramente casualizado a pH 9,5 através da precipitação de uma solução de efluente sintético com quatro diferentes fontes de magnésio: MgCl2∙6H2O, MgSO4∙7H2O, MgO e magnesita (MgCO3). Após pré-acidificação, soluções derivadas de fontes alternativas de baixo custo de magnésio removeram acima de 55 e 90% de nitrogênio amoniacal e fosfato em solução, respectivamente, e alcançaram por volta de 10 g L-1 de cristais precipitados. A proximidade dos resultados obtidos com soluções derivadas de fontes comerciais de magnésio (46ꟷ56% de remoção de nitrogênio amoniacal, 97% de remoção de fosfato, e mais de 6 g L-1 de precipitado formado) indicou que reagentes alternativos puderam facilmente substituir os comerciais se submetidos ao prévio processo de digestão, a fim de tornar o magnésio disponível em solução. A análise qualitativa por difratometria de raios-X confirmou a presença de estruvita e newberyita na maioria dos precipitados. NH4MgPO4∙6H2O NH4MgPO46H2O NHMgPOHO NH4MgPO4 6H2O NH MgPO H O (NH4MgPO4∙6H2O eou ou sentido objetivouse objetivou 95 9 5 9, MgCl26H2O MgClHO MgCl2 MgCl MgCl2∙6H2O MgSO47H2O MgSOHO MgSO4 7H2O MgSO MgSO4∙7H2O MgCO3. MgCO3 MgCO . (MgCO3) préacidificação, préacidificação pré acidificação, acidificação pré-acidificação 90 respectivamente 1 L1 L L- precipitados 46ꟷ56% 46ꟷ56 ꟷ (46ꟷ56 97 formado digestão raiosX raios X NHMgPO NH4MgPO HO (MgCO3 46ꟷ5 (46ꟷ5 (MgCO 46ꟷ (46ꟷ

ABSTRACT Struvite (NH4MgPO4∙6H2O) is a slow-release fertilizer obtained through phosphorus and/or nitrogen recovery from wastewaters, usually by adding magnesium salts. In this sense, the aim was to evaluate the viability of replacing commercial magnesium sources with alternative ones in the struvite precipitation process regarding ammonium and phosphate removal and precipitated crystal quantification and characterization. Experiments were conducted on a bench scale in a completely randomized design at pH 9.5 by precipitation of synthetic wastewater solution with four magnesium sources: MgCl2∙6H2O, MgSO4∙7H2O, MgO, and magnesite (MgCO3). After pre-acidification, derived solutions from low-cost alternative sources of magnesium removed above 55 and 90% of ammonium nitrogen and phosphate in solution, respectively, and reached around 10 g L-1 of precipitated crystals. Results proximity obtained with solutions derived from commercial sources of magnesium (46ꟷ56% of ammonium nitrogen removal, 97% of phosphate removal, and more than 6 g L-1 of precipitate formed) indicated that alternative reagents could easily substitute commercial ones if submitted to the previous digestion process, making magnesium available in solution. Qualitative analysis by X-ray diffraction confirmed the presence of both struvite and newberyite in most precipitates. NH4MgPO4∙6H2O NH4MgPO46H2O NHMgPOHO NH4MgPO4 6H2O NH MgPO H O (NH4MgPO4∙6H2O slowrelease slow release andor or wastewaters salts sense characterization 95 9 5 9. MgCl26H2O MgClHO MgCl2 MgCl MgCl2∙6H2O MgSO47H2O MgSOHO MgSO4 7H2O MgSO MgSO4∙7H2O MgO MgCO3. MgCO3 MgCO . (MgCO3) preacidification, preacidification pre acidification, acidification pre-acidification lowcost low cost 90 respectively 1 L1 L L- crystals 46ꟷ56% 46ꟷ56 ꟷ (46ꟷ56 97 formed Xray X ray precipitates NHMgPO NH4MgPO HO (MgCO3 46ꟷ5 (46ꟷ5 (MgCO 46ꟷ (46ꟷ

This research aims to develop a precise and efficient dispersive solid-phase microextraction (DSPE) technique using third-generation polyamidoamine (PAMAM) dendrimer-grafted nanoparticles to quantify benzoylurea pesticides in green tea, black tea, and oolong tea infusions. The extraction efficiency is optimized through single-factor adjustments of key parameters, including adsorbent quantity (5-20 mg), adsorption duration (5-20 min), desorbent identity (methanol, acetonitrile), volume (100-600 μL), sodium chloride concentration (0-10%, m/v), and sample solution pH (3-8). The optimized method demonstrates linearity in the range of 2-500 μg L-1, with limits of detection (LODs) ranging from 0.6-1.5 μg L-1 and limits of quantification (LOQs) from 2.0 5.0 μg L-1. Recovery rates of 81.2-96.0% are achieved, with intra-day relative standard deviations (RSDs) of 1.4-2.8% and inter-day relative standard deviations of 2.0-3.9%, indicating high accuracy and repeatability. The successful application of detecting residues in commercial tea samples underscores the strong potential of the technique to determine benzoylurea analyte levels. solidphase solid phase DSPE (DSPE thirdgeneration third generation PAMAM (PAMAM dendrimergrafted dendrimer grafted infusions singlefactor single factor parameters 520 5 20 (5-2 mg, mg , mg) min, min min) methanol, methanol (methanol acetonitrile, acetonitrile acetonitrile) 100600 100 600 (100-60 μL, μL μL) 010%, 010 0 10%, 10 (0-10% m/v, mv m/v m v m/v) 38. 38 3 8 . (3-8) 2500 2 500 2-50 L1, L1 L 1, 1 LODs (LODs 0.61.5 0615 0.6 1.5 6 0.6-1. L- LOQs (LOQs 2. 50 5. L1. 1. 81.296.0% 812960 81.2 96.0% 81 96 81.2-96.0 achieved intraday intra day RSDs (RSDs 1.42.8% 1428 1.4 2.8% 4 1.4-2.8 interday inter 2.03.9%, 2039 3.9%, 9 2.0-3.9% repeatability levels 52 (5- 10060 60 (100-6 010% 01 10% (0-10 (3-8 250 2-5 61 0.61. 061 06 0. 15 0.6-1 296 81.296.0 81296 812 81. 960 96.0 81.2-96. 42 1.42.8 142 14 28 2.8 1.4-2. 03 2.03.9% 203 39 3.9% 2.0-3.9 (5 1006 (100- (0-1 (3- 25 2- 0.61 0.6- 29 81.296. 8129 96. 81.2-96 1.42. 1.4-2 2.03.9 3.9 2.0-3. ( (100 (0- (3 81.296 81.2-9 1.42 1.4- 2.03. 3. 2.0-3 (10 (0 81.29 81.2- 2.03 2.0- (1

Serial numbers are marks present on several day-to-day objects, created by manufacturers for purposes such as quality control, product tracking and to prevent counterfeiting. In the case of firearms, these characters can be obliterated or damaged by natural processes or intentionally by criminals to prevent positive identification of stolen property. One non-destructive method employed by crime laboratories for the restoration of obliterated characters is the magnetic particle method. The present work aims to study the synthesis and application of waste-made magnetic nanoparticles in the recovery of adulterated markings. A set of analytical-grade materials and metallic waste magnetic nanoparticles were synthesized for comparison purposes. Chemical characterization tests by X-ray fluorescence, morphological tests by scanning electron microscopy (SEM), and magnetization tests by vibrating sample magnetometer (VSM) were performed. The efficacy of the synthesized nanoparticles was tested on 1020 steel plates previously engraved and adulterated by sanding. Both homemade magnetic nanoparticles demonstrated superior performance compared to commercial magnetic particles. The application of homemade magnetic particles, especially using waste as the source of production, decreases the cost of the material and is environmentally friendly. The development of this material makes magnetic serial number restoration a better option for widespread use in forensic procedures. daytoday day objects control counterfeiting firearms property nondestructive non destructive wastemade made markings analyticalgrade analytical grade Xray X ray fluorescence SEM, SEM , (SEM) VSM (VSM performed 102 sanding particles production friendly procedures (SEM 10 1

Cupuaçu (Theobroma grandiflorum Schum.) is an Amazonian fruit rich in antioxidants potential due to its phenolic compounds. Its seeds produce cupulate, a chocolate-like product, and the residue remains rich in biocompounds. This study aimed to optimize and compare microwave-assisted (MAE) and high pressure/temperature extraction (HPTE) of polyphenolic and flavonoid compounds from cupuaçu seed by-products. A Box-Behnken 33 factorial design assessed the influence of extraction time, solid/liquid ratio, and ethanol concentration. Responses included total polyphenol content, total flavonoid content, and anti-radical power via the ABTS (2,2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid) method. In optimum conditions, MAE had the highest total polyphenol content and HPTE for flavonoids. Optimal conditions for both methods were 65% (m/v) ethanol concentration, 45 min extraction time, and 0.03 g mL−1 solid/liquid ratio. MAE and HPTE achieved greater recovery of (−)-epicatechin and (−)-epigallocatechin-3-gallate compared to percolation. Both techniques proved viable for recovering polyphenols from cupuaçu seed by-products, in less time and with less solvent. Thus, cupuaçu by-products can be a sustainable and functional food source, with MAE and HPTE providing high yields and quality extracts rich in polyphenols. Theobroma Schum. Schum cupulate chocolatelike chocolate like product biocompounds microwaveassisted microwave assisted (MAE pressuretemperature pressure temperature (HPTE byproducts. byproducts by products. products BoxBehnken Box Behnken 3 solidliquid solid liquid ratio concentration antiradical anti radical 2,2azinobis3ethylbenzothiazoline6sulphonic 22azinobis3ethylbenzothiazoline6sulphonic azinobisethylbenzothiazolinesulphonic 2,2 azino bis ethylbenzothiazoline 6 sulphonic 2 acid method flavonoids 65 m/v mv m v (m/v 4 003 0 03 0.0 mL1 mL 1 mL− −epicatechin epicatechin − −epigallocatechin3gallate epigallocatechin3gallate epigallocatechingallate epigallocatechin gallate percolation byproducts, products, solvent Thus source 2azinobis3ethylbenzothiazoline6sulphonic azinobis 22 2, 00 0.

Nanocomposites of GO/γ-Fe2O3 were used for magnetic dispersive solid-phase microextraction (m-d-μ-SPE) of six pesticides from river water samples, followed by the determination using high performance liquid chromatography-diode array detection. The synthesis of the nanocomposites is described and characterized using Fourier transform-infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. A central composite design was used to optimize the extraction time, sample solution pH, and adsorbent amount. The solvent type and volume for desorption and the effect of the ionic strength for adsorption were also investigated. The optimum adsorption conditions were achieved at 84 min of extraction time, pH 5.4, 115 mg of absorbent, and 1% (m/v) of NaCl, while the desorption solvent selected was 1.0 mL of methanol-acetic acid (9:1, v/v). The limits of detection ranged from 0.1 to 0.9 μg L-1, and a good precision was achieved with relative standard deviation (RSD) lower than 7.6% (n = 10). The accuracy of the method was accessed by recovery tests ranging from 82 to 117% (n = 3, RSD < 8%). GO/γFe2O3 GOγFe2O3 GOγFeO GO/γ Fe2O3 GO γ Fe O GO/γ-Fe2O solidphase solid phase mdμSPE m d μ SPE (m-d-μ-SPE samples chromatographydiode chromatography diode transforminfrared transform infrared spectroscopy Xray X ray diffraction microscopy time amount investigated 8 54 5 4 5.4 11 absorbent 1 m/v mv v (m/v NaCl 10 0 1. methanolacetic methanol acetic 91, 91 9 1, (9:1 v/v. vv v/v . v/v) 01 0. 09 L1, L1 L L-1 (RSD 76 7 6 7.6 n 10. 10) 117 3 8%. 8% 8%) γFe2O3 γFe GO/γFe2O GOγFe GOγFe2O GOγ FeO Fe2O 5. (9: L- 7. γFeO γFe2O (9 (

The antifouling booster biocides are frequently studied for toxic effects on the aquatic ecosystems. The present investigation proposes passive silicone rubber samplers as a collection method for biocides, once these methods can concentrate substances in aqueous matrices at very low levels. Through the passive sampler-water partition coefficient (Ksw) and the analyte chemical nature, we can optimize their extraction from the membrane to apply in the sample medium. We used the co-solvent method to determine the Ksw of three third-generation antifouling biocides, chlorothalonil, dichlofluanid, and dichlorooctylisothiazolinone (DCOIT), with log Ksw = 2.24, 4.01, and 2.38, respectively. Improving extraction also led to a recovery range higher than 70%, determinations were carried out by gas chromatography with an electron capture detector. Biocides concentration in seawater samples from Itaqui port (São Marcos Bay, northern Brazil) ranged from 0.058 to 0.72 µg L-1 for chlorothalonil, 0.001 to 0.008 µg L-1 for dichlofluanid, and 0.018 to 0.64 µg L-1 for DCOIT. ecosystems levels samplerwater sampler water (Ksw nature medium cosolvent co solvent thirdgeneration third generation chlorothalonil dichlofluanid DCOIT, DCOIT , (DCOIT) 224 2 24 2.24 401 4 01 4.01 238 38 2.38 respectively 70 70% detector São Bay Brazil 0058 0 058 0.05 072 72 0.7 L1 L 1 L- 0001 001 0.00 0008 008 0018 018 0.01 064 64 0.6 (DCOIT 22 2.2 40 4.0 23 3 2.3 7 005 05 0.0 07 0. 000 00 06 6 2. 4.

RESUMO: A fisiologia das plantas muda ao longo do dia porque os fotoassimilados podem aumentar a concentração de carboidratos solúveis em água à tarde em comparação com a manhã. Este estudo teve como objetivo avaliar o efeito do horário de colheita na composição morfológica da silagem de milho de planta inteira, tamanho de partícula, perfil de fermentação, composição química, degradação in vitro e estimativa da produção de leite. Um ensaio agronômico de dois anos foi realizado em delineamento inteiramente casualizado, e um silo experimental foi produzido por cada parcela (n = 16). A colheita da tarde aumentou (P < 0,01) o teor de matéria seca em relação à colheita da manhã. A época de colheita não afetou (P ≥ 0,32) a proporção de grãos, colmos e folhas do milho e o tamanho das partículas da silagem. Entretanto, a colheita da manhã aumentou (P = 0,01) a recuperação de matéria seca e não teve efeito (P ≥ 0,10) no pH da silagem e nas concentrações de ácido láctico e acético em comparação à colheita da tarde. Além disso, a colheita da tarde, em vez da colheita da manhã, aumentou (P ≤ 0,05) o amido da silagem, os carboidratos solúveis em água, a lignina detergente ácida e o teor de extrato etéreo e a degradação in vitro da matéria seca. Controversamente, os tratamentos não mostraram efeito (P ≥ 0,14) na concentração de energia da silagem, no conteúdo energético estimado e na produção de leite. Assim, a colheita da manhã produz mais matéria seca da silagem, mas a colheita da tarde melhora o valor nutricional da silagem de milho sem impacto na produção estimada de leite. RESUMO inteira partícula fermentação química leite casualizado n 16. 16 . 16) P 0,01 001 0 01 0,32 032 32 grãos Entretanto 0,10 010 10 disso 0,05 005 05 Controversamente 0,14 014 14 Assim 1 0,0 00 0,3 03 3 0,1 0,

ABSTRACT: Plants’ physiology changes through the day because photoassimilates can increase water-soluble carbohydrate concentration in the afternoon compared to the morning. This study evaluated the harvest time effect on whole-plant corn silage morphological composition, particle size, fermentation profile, chemical composition, in vitro degradation, and estimated milk yield. A two-year agronomic assay was performed in a completely random design, and one experimental silo was produced by each parcel (n = 16). The afternoon harvest increased (P < 0.01) dry matter content compared to the morning harvest. Harvest time did not affect (P ≥ 0.32) corn grain, stalk, leaf proportion, and silage particle size. However, the morning harvest increased dry matter recovery (P = 0.01) and had no effect (P ≥ 0.10) on silage pH and concentrations of lactic and acetic acid compared to the afternoon harvest. In addition, afternoon harvest instead of morning harvest increased (P ≤ 0.05) silage starch, water-soluble carbohydrates, acid detergent lignin, and ether extract content and dry matter in vitro degradation. Controversially, treatments showed no effect (P ≥ 0.14) on silage energy concentration, estimated energy content, and milk yield. Thus, the morning harvest produces more silage dry matter, but the afternoon harvest improves corn silage’s nutritional value with no impact on estimated milk yield. ABSTRACT Plants watersoluble water soluble wholeplant whole plant composition size profile degradation yield twoyear two year design n 16. 16 . 16) P 0.01 001 0 01 0.32 032 32 grain stalk proportion However 0.10 010 10 addition 0.05 005 05 starch carbohydrates lignin Controversially 0.14 014 14 Thus silages s 1 0.0 00 0.3 03 3 0.1 0.

ABSTRACT Introduction: Burnout results from chronic exposure to work-related stress and it is characterized by a reduction in professional efficacy, feelings of lack of energy/exhaustion, and negativity related to work activities. It has a higher incidence in professions with significant interpersonal contact and among caregivers, making doctors a vulnerable population. The Maslach Burnout Inventory questionnaire is considered the gold standard for measuring this disease. In 2014, quinquennial prevention was described, aiming to prevent harm to patients through strategies that reduce Burnout in doctors. Clinical Case: The case describes a 29-year-old woman, a physician in her final year of Residency in General and Family Medicine, who sought an urgent consultation due to feelings of physical and mental exhaustion, hopelessness, irritability, initial and middle insomnia, for the last three months, and hyperphagia, two months ago. She has requested a sick leave from work because “I can't stand working anymore. I need to sleep for a week”. She identified excessive workload at the Clinic, stemming from the demands of her medical residency, as the main cause. She feels unsupported by her colleagues and Training Supervisor and feels pressured to manage the medical agenda without adequate preparation. She reports occasional errors in prescriptions, leading her to feel the need to repeatedly review records and decisions she has made. She denies any appointment with her designated Work physician ever since she started her internship. Upon physical examination, she appeared slaughtered, with a depressed mood, tearful, restless, and with fleeting eye contact. Applying the Maslach Burnout Inventory: Section A- 34 points- high level; Section B- 28 points- high level; Section C- 25 points- high level. A work leave from work was issued, laboratory studies were requested, and fluoxetine 20 mg and trazodone 50 mg were initiated, along with psychotherapy. So far, the patient has been re-evaluated in three consultations, with organic causes ruled out, and in the last re-evaluation, her scores were: Section A- 20 points- moderate level; Section B- 5 points- low level; Section C- 39 points- moderate level. She reports a decrease in medical errors. She maintained the prescribed medication and psychotherapy. She declined to join a Balint group. A new re-evaluation was scheduled in six months. Discussion/Conclusion: This is a case of a General and Family Medicine Resident Physician, diagnosed with Burnout, who has managed to substantially improve her quality of life and job satisfaction, as well as her personal life, following the implementation of both pharmacological and non-pharmacological measures, along with workplace adjustments and the setting of boundaries. She has successfully reduced her perception of making medical errors, thereby improving the quality of healthcare provided to the patients. The long journey of recovery from Burnout makes the monitoring of this illness imperative not only by the patients Family Doctor and Psychologist, but also by the Occupational physician, targeting the improvement of the quality of life of the healthcare professionals in their occupational activity. This clinical case’s purpose is to address and raise awareness among professionals to the prevention of Burnout, particularly in Residents, promoting quinquennial prevention. It is important to note that only professionals who are fulfilled in their biopsychosocial sphere can provide quality care and significantly reduce medical errors.

RESUMO Introdução: O Burnout resulta da exposição crónica ao stress laboral e caracteriza-se por redução da eficácia a nível profissional, sentimentos de falta de energia/exaustão e negatividade relacionados com a atividade laboral. Tem maior incidência em profissões de elevado contacto com pessoas e em prestadores de cuidados, tornando os médicos uma população vulnerável. O questionário Maslach Burnout Inventory é considerado gold standard para a medição desta patologia. Em 2014 foi descrita a prevenção quinquenária, que pretende evitar o dano para o paciente, atuando no médico através de estratégias que visem a diminuição do Burnout. Caso Clínico: Descreve-se uma mulher de 29 anos, médica, no último ano da especialização em Medicina Geral e Familiar, que recorreu a consulta aberta por sensação de exaustão física e mental, sentimentos de desesperança, irritabilidade, insónia inicial e intermédia, com três meses de evolução e hiperfagia há dois meses. Solicitou certificado de incapacidade temporária para o trabalho, porque “já não aguento mais trabalhar. Preciso de dormir uma semana”. Aponta como principal etiologia o trabalho excessivo no Centro de Saúde, decorrente da exigência do internato médico. Sente-se pouco apoiada pelos colegas de equipa e orientador de formação e considera-se pressionada a gerir a agenda médica sem ter preparação para tal. Relata erros pontuais na prescrição médica, pelo que sente necessidade de rever várias vezes os registos efetuados e as atitudes tomadas. Nega ter sido convocada para qualquer consulta de Medicina do Trabalho desde que ingressou na especialidade. Ao exame objetivo, apresentava-se cabisbaixa, com humor deprimido, chorosa, inquieta e com contacto ocular fugaz. Aplicando o questionário atrás mencionado: Secção A - 34 pontos - nível elevado; Secção B - 28 pontos - nível elevado; Secção C - 25 pontos - nível elevado. Foi emitido o certificado de incapacidade temporária para o trabalho, solicitado estudo analítico e iniciada fluoxetina 20mg e trazodona 50mg, bem como psicoterapia. Até à data, a doente foi reavaliada em três consultas, foi excluída patologia orgânica e na última reavaliação apresentava os seguintes valores: Secção A- 20 pontos- nível moderado; Secção B- 5 pontos- nível baixo; Secção C- 39 pontos- nível moderado. Refere diminuição dos erros médicos. Manteve a medicação instituída, bem como a psicoterapia. Recusou o grupo Balint. Foi programada nova reavaliação em seis meses. Discussão/Conclusão: Trata-se de uma doente, Médica Interna em Medicina Geral e Familiar com o diagnóstico de Burnout, que conseguiu melhorar substancialmente a sua qualidade de vida e satisfação no trabalho e vida pessoal, após a implementação de medidas farmacológicas e não farmacológicas e também após alterações a nível laboral e imposição de limites. Conseguiu diminuir a perceção de erro médico, melhorando assim os cuidados de saúde prestados aos utentes. O longo percurso de recuperação desta doença torna fulcral o acompanhamento destes utentes pela equipa de Medicina do Trabalho, e não só pelo Médico de Família e Psicólogo, visando melhorar a qualidade de vida e saúde dos profissionais no âmbito da sua atividade laboral. Com este caso clínico pretende-se abordar e sensibilizar os profissionais para a prevenção do Burnout, em particular nos médicos internos, fomentando a prevenção quinquenária. De ressalvar que apenas profissionais realizados na sua esfera biopsicossocial conseguem proporcionar cuidados de qualidade e reduzir de forma importante o erro médico.

Abstract Introduction: The initial treatment of stenosing tenosynovitis is usually conservative. When there is no good response, it must be resolved by surgically releasing the A1 pulley, traditionally with open release (OR). However, there is the alternative of ultrasound-guided percutaneous A1 pulley release (UPAR), which has shown similar results. Objective: To evaluate the effectiveness and costs of UPAR compared to OR at our center. Method: A retrospective study was carried out in patients undergoing UPAR. Information on pain scale, mechanical symptoms (Quinnell grades), and disability (QuickDASH) was obtained before and after the procedure. The costs of UPAR and OR alternatives were evaluated. Results: A statistically significant improvement in pain, mechanical symptoms and disability was observed after the procedure. No complications were reported. UPAR was found to be 63% less expensive than the most economical OR alternative. Conclusion: UPAR is a safe and effective alternative to treat “trigger finger or thumb”, with low costs and a shorter recovery period compared to OR. UPAR should be considered as the initial treatment when other options have not been successful.

Resumen Introducción: El tratamiento inicial de la tenosinovitis estenosante suele ser conservador. Cuando no hay buena respuesta debe resolverse liberando quirúrgicamente la polea A1, tradicionalmente con liberación abierta (LA), sin embargo, existe la alternativa de la liberación percutánea de la polea A1 guiada por ultrasonido (LPAUS), que ha mostrado similares resultados. Objetivo: Evaluar la eficacia y costos de LPAUS en comparación con la LA en nuestro centro. Método: Se llevó a cabo un estudio retrospectivo en pacientes sometidos a LPAUS. Se obtuvo información sobre escala del dolor, síntomas mecánicos (grados de Quinnell) y discapacidad (QuickDASH) antes y después del procedimiento. Se evaluaron los costos de este y las alternativas de LA. Resultados: Se observó una mejora estadísticamente significativa en dolor, síntomas mecánicos y discapacidad después del procedimiento. No se informaron complicaciones. La LPAUS resultó ser un 63% menos costosa que la alternativa de LA más económica. Conclusión: La LPAUS es una alternativa segura y efectiva para tratar el «dedo o pulgar en gatillo», con bajos costos y un periodo de recuperación más corto en comparación con la LA. La LPAUS se debe considerar como tratamiento inicial cuando otras opciones no han tenido éxito.

Resumo O concreto quando exposto a elevadas temperaturas tem suas propriedades alteradas e os processos de recuperação são dependentes da intensidade destas modificações. O objetivo deste artigo foi avaliar a influência das altas temperaturas nas propriedades do concreto, em uma faixa na qual a estrutura ainda pode ser recuperada, e a verificação dos efeitos gerados no material quando submetidos a resfriamento natural e resfriamento rápido. Para isto se desenvolveu o programa experimental com três traços de concreto, os quais foram expostos a temperaturas de 100 ºC, 300 ºC, 450 ºC e 600 ºC; subdivididos em grupos de resfriamento lento e rápido. Com a elevação da temperatura, intensificam-se os processos de fissuração e alterações microestruturais, as quais geram redução nas resistências mecânicas e o aumento da absorção. Verificou-se que o módulo de elasticidade foi a propriedade mais afetada por estas alterações. As correlações entre o módulo de elasticidade e as demais propriedades foram acompanhadas pelo aumento da microfissuração do concreto, perda de água e decomposição das fases da pasta, sendo observada posterior reidratação da etringita durante o resfriamento do concreto. modificações recuperada rápido 10 30 45 60 temperatura intensificamse intensificam microestruturais absorção Verificouse Verificou pasta 1 3 4 6

Abstract Concrete, when exposed to high temperatures, has its properties changed, and the recovery processes depend on the intensity of these changes. This paper aimed to evaluate the influence of high temperatures on concrete properties and verify the effects generated in the material when submitted to natural and fast cooling. Three different concrete mixes were exposed to temperatures of 100 °C, 300 ºC, 450 ºC, and 600 ºC, subdivided into slow and fast cooling groups. With the increase in temperature, cracking processes and microstructural alterations intensified, generating reductions in mechanical strength and increases in absorptions. This study has identified that the elastic modulus was the property most affected by these changes. The correlations between the elastic modulus and the other properties were accompanied by increased concrete micro-cracking, water loss, and decomposition of paste phases. Also, it was found an effect of ettringite rehydration during concrete cooling. Concrete changed changes 10 C °C 30 ºC 45 60 groups temperature intensified absorptions microcracking, microcracking micro cracking, micro-cracking loss phases Also 1 3 4 6

Abstract Purpose: To analyze the role of the community assembly as a determining instrument to exercise governance in local indigenous politics, because the various disputes between political factions erode the social fabric and increase the inequality gap. Methodological design: A qualitative, ethnographic study in the municipality of San Luis Amatlán, Oaxaca. Fifteen in-depth interviews were carried out with authorities throughout the municipality and with the adult population. The analysis was done with the analytical categories of governance in the Internal Regulatory Systems, in addition to the participants’ opinion on the performance of the municipal administrator. Results: It was found that the recovery of the municipal community assembly, as well as the assemblies in agencies and rancherías caused greater trust among the participants, together with an increase in the possibility of tracing a joint route to recover local governance through the election of the municipal council. Limitations of the study: Although the ethnographic approach sought to give voice to multiple community actors and social sectors, the research had a greater relationship with the authorities because they coexist more closely with the resource administration processes and their oversight. Findings: The community assembly is a fundamental element of the Internal Regulatory Systems which are consistent with the local customs and habits. The function of the assembly is not only to build consensus, it also acts as a means of control and administrative surveillance. Also, there is persistent conflict derived from the institutional design of indigenous municipalities, which have forms of resolution in their uses and customs such as the assembly, which is a space to address problems directly and without intermediaries.

Resumen Objetivo: Analizar el rol de la asamblea comunitaria como instrumento determinante para ejercer gobernanza en la política local indígena, ya que las diversas disputas entre facciones políticas erosionan el tejido social e incrementan la brecha de desigualdad. Diseño metodológico: Es de tipo cualitativo con una etnografía en el municipio de San Luis Amatlán, Oaxaca. Se realizaron 15 entrevistas a profundidad con autoridades en todo el municipio y con población adulta. El análisis se hizo con las categorías analíticas de gobernanza en los Sistemas Normativos Internos, además de la opinión sobre la figura de administrador municipal. Resultados: Se constató que la recuperación de la asamblea comunitaria municipal, así como las asambleas en agencias y rancherías, provocó mayor confianza entre las partes y la posibilidad de trazar una ruta conjunta para recobrar la gobernanza local a través de la elección del cabildo municipal. Limitaciones del estudio: Aunque la etnografía buscó dar voz a múltiples actores y sectores sociales comunitarios, la investigación tuvo mayor relación con las personas autoridades ya que éstas conviven con mayor cercanía con los procesos de administración de los recursos y su contraloría. Hallazgos: La asamblea comunitaria es un elemento fundamental en los Sistemas Normativos Internos, los cuales están insertos en los usos y costumbres indígenas y su función no sólo es construir consensos, sino que además actúa como medio de contraloría y vigilancia administrativa. También existe persistente conflictividad derivada del diseño institucional de los municipios indígenas, los cuales tienen formas de resolución en sus usos y costumbres como la asamblea, la cual es un espacio para abordar problemas de forma directa y sin intermediarios.

Abstract Purpose: To analyze the contribution of the program "Sembrando Vida" in alleviating the poverty of male and female farmers using an Actor-Oriented Approach (AOA), to comprehend the program's impact on poverty reduction in Acayucan, Veracruz, Mexico. This analysis takes into consideration aspects such as employment, food self-sufficiency, the reconstruction of social fabric, forest recovery, the potential of territories, and overall well-being. Methodological design: This is an ethnographic study, using in-depth interviews and participant observation of ten farmers in the program over a period of seven months. The analysis of the information was carried out using NVivo software. Results: The program is partially fulfilling the objective to decrease poverty, because farmers still confront productive limitations, social vulnerability, higher investments, and technical-productive difficulties. Research limitations: The scope of the research only corresponds to the actors who participated in the research; therefore, the results cannot be generalized. Comparisons with more communities and with farmers not participating in the program would give a broader picture. Findings: This study contributes to the understanding of the impact of public interventions on development processes. The findings contribute to improving the implementation of the program and to developing future projects that consolidate the medium and long-term goals of the program.

Resumen Objetivo: analizar la contribución del programa Sembrando Vida en el alivio de la pobreza de campesinas y campesinos desde un Enfoque Orientado al Actor (EOA), para comprender el impacto del programa en la disminución de la pobreza en Acayucan, Veracruz, México; considerando aspectos como: el empleo, la autosuficiencia alimentaria, la reconstrucción del tejido social, la recuperación forestal, el potencial de territorios y el bienestar. Diseño metodológico: esta investigación cualitativa es de carácter etnográfico, realizando entrevistas a profundidad y observación participante a diez agricultores del programa durante un periodo de siete meses. El análisis de la información se realizó a través del software NVivo. Resultados: el programa está cumpliendo parcialmente con su objetivo de combate a la pobreza, puesto que los campesinos aún enfrentan limitaciones productivas, vulnerabilidad social, mayores inversiones y dificultad técnico-productiva. Limitaciones de la investigación: los alcances de la investigación solo corresponden a los actores que participaron en ella, por lo tanto, los resultados no pueden generalizarse. Comparar con más comunidades y con campesinos no participantes del programa daría una visión más amplia. Hallazgos: se aporta una mayor comprensión del impacto de las intervenciones públicas en los procesos de desarrollo. Lo encontrado suma para la mejora del programa en su aplicación y en el desarrollo de futuros proyectos que consoliden las metas a mediano y largo plazo del programa.