Poly(amidoamine)-type dendrimers (PAMAM) were synthesized by divergent routes, and generations (G0.5, G1.0, G1.5, G2.0 and G2.5) along with hydroxylated half-generation polymers (G0.5-OH, G1.5-OH and G2.5-OH) were characterized by Fourier-transform infrared spectroscopy, thermogravimetric analysis and differential scanning calorimetry. Carbon dioxide (CO2) capture tests were performed using thermogravimetric analysis. Among the absorption temperatures tested, 60 °C was the most promising: 0.77, 1.08, and 1.14 mol CO2 L 1 for G0.5-OH, G1.5-OH and G2.5-OH, respectively, of CO2 and partial pressure of 45 kPa. This showed that dendrimers with larger molecular structures have more hydroxyl groups and consequently capture more CO2. However, at low partial pressures (< 2 kPa), CO2 solubility in PAMAM increased with temperature reduction, confirmed by Henry’s solubility constant (398.4 mol m3 kPa 1, in G2.5-OH at 40 °C). According to the thermodynamic properties of CO2 solubilization, the process was spontaneous (∆Gsol < 0) and exothermic (∆Hsol < 0). Polyamidoaminetype Poly amidoamine type (PAMAM routes G0.5, G05 G G0 5 (G0.5 G10 G1 0 G1.0 G15 G1.5 G20 G2 G2. G2.5 G25 halfgeneration half generation G0.5OH, G05OH GOH G0.5 OH, OH (G0.5-OH G1.5OH G15OH G2.5OH G25OH Fouriertransform Fourier transform spectroscopy calorimetry CO (CO2 tested 6 C promising 077 77 0.77 108 08 1.08 114 14 1.1 G0.5-OH G2.5OH, respectively 4 However ( kPa, , kPa) reduction Henrys Henry s 398.4 3984 398 (398. m °C. . °C) solubilization ∆Gsol Gsol ∆Hsol Hsol 0. (G0. G1. 5OH G0.5OH G0. (CO 07 7 0.7 10 1.0 11 1. 398. 39 (398 (G0 3 (39 (G (3

Bisphenol A (BPA), an endocrine disruptor used in different commercial polymers, is a persistent pollutant commonly found in effluents. Conventional wastewater treatment processes have low chemical removal efficiency and are expensive. This work evaluated BPA removal using laccase enzyme produced from white rot fungus Pleurotus ostreatus. For the enzymatic production, residues of acai berry and pineapple were used as laccase inducers. The use of natural inducers led to a high enzyme production (1139 and 1031 U mL−1 to acai and pineapple, respectively). Bisphenol A was removed to a concentration lower than LOD (limit of detection) after 4 h. The degradation mechanism of BPA occurred by oxidation of methyl to hydroxymethyl group in a propane portion, with breakdown of the aromatic ring. The developed technology brought to the scene a new green, viable methodology, using vegetable waste, adding value to these residues and bringing an alternative to the BPA treatment. BPA, , (BPA) polymers effluents expensive ostreatus 1139 (113 103 mL1 mL 1 mL− respectively. respectively . respectively) limit detection h portion ring green methodology waste (BPA 113 (11 10 11 (1 (

High-density polyethylene (HDPE) geomembranes are commonly used as an environmental protection liner due to their good chemical and mechanical resistances and low cost. Ultraviolet (UV) radiation is an essential issue in durability studies for pond applications. This study evaluated a 1.5-mm thick HDPE geomembrane exposed to ultraviolet fluorescent radiation for 8760 h in a laboratory and thermoanalytical and physical analyses were conducted towards the understanding of its performance after exposure. According to the results, although the geomembrane maintained the ductile behavior, it showed a 52.48% final decrease in stress crack resistance (SCR) compared to virgin SCR. Moreover, a considerable antioxidant depletion occurred after 8760 h exposure shown by the Std. OIT (standard oxidative-induction time) results, demonstrating a Std. OIT value decrease of 89.19% compared to the virgin Std. OIT. Such a behavior contributed to the susceptibility of thermal effects in the DSC (differential scanning calorimetry) curves and the losses observed in the SCR values, attesting the geomembrane’s oxidative degradation mechanism occurred and changed the polymer’s structure. Highdensity High density (HDPE cost UV (UV applications 1.5mm 15mm mm 1.5 1 5 876 results 5248 52 48 52.48 (SCR Moreover Std standard oxidativeinduction induction time 8919 89 19 89.19 differential calorimetry values s polymers polymer structure 5mm 15 1. 87 524 4 52.4 891 8 89.1 52. 89.

Abstract Columns are important structural elements in a building and can be reinforced to increase their capacity. Reinforcement by bonding Fiber Reinforced Polymers (FRP) is attractive because it is easy to apply and does not modify the section. This material has been used in columns for its confinement effect. However, the confinement of columns in non-circular sections is not as efficient as in circular ones. Non-circular geometries behave differently because part of the concrete is not confined. This research aims to study the behavior of rectangular concrete columns reinforced with carbon fiber mats. The aim is to evaluate the performance of rectangular columns with a section side ratio of 2 and to determine the efficiency of the reinforcement. Two groups of columns were tested, one without reinforcement and the other reinforced with a layer of mat. Numerical models were designed with the Finite Element Method (FEM) using Abaqus. The numerical model made it possible to analyze the distribution of stresses in the pillars. Experimental results of maximum force were compared with analytical predictions. The results obtained indicate the efficiency of the reinforcement by improving ductility and increasing load capacity by 30%. FRP (FRP effect However noncircular non ones Noncircular Non confined mats tested mat FEM (FEM Abaqus pillars predictions 30 30% 3

Resumo Pilares são elementos estruturais de grande importância numa edificação e que durante sua vida útil podem ser submetidos a um processo de reforço para aumento da sua capacidade. O reforço com Polímeros Reforçados com Fibras (PRF) é atraente pela facilidade de aplicação e não modificação da seção. O material vem sendo utilizado em pilares pelo efeito de confinamento. Entretanto, em pilares com seções não circulares, o efeito do confinamento não é eficiente como em circulares. Em geometrias de seções não circulares, parte do concreto não fica devidamente confinado. A pesquisa busca estudar o comportamento do reforço de pilares de concreto retangulares pelo confinamento com manta de fibras de carbono. O objetivo é avaliar o desempenho e a eficiência do reforço em pilares retangulares não armados, com altura de 800 mm e relação entre os lados igual a 2. Foram ensaiados dois grupos de pilares, um sem reforço e outro reforçado. Foram idealizados modelos numéricos com o Método dos Elementos Finitos utilizando-se o Abaqus. O modelo numérico permitiu analisar a distribuição das tensões nos pilares. Os resultados experimentais de força máxima foram comparados com previsões analíticas. Os resultados obtidos indicam eficiência do reforço por meio de melhoria na ductilidade e aumento da capacidade de carga em 30%. PRF (PRF seção Entretanto circulares confinado carbono armados 80 2 reforçado utilizandose utilizando se Abaqus analíticas 30 30% 8 3

Resumen El plástico se ha vuelto muy popular en los últimos años gracias a su durabilidad y propiedades. A pesar de sus múltiples ventajas, la humanidad ha desarrollado cierta dependencia hacia este material, lo que ha propiciado un incremento en su uso y, a su vez, en la generación de desechos ante el escaso hábito de reúso. Uno de los polímeros plásticos más usados es el poliestireno (PS), ya que este se usa en una amplia gama de aplicaciones gracias a su bajo costo y fácil producción. Sin embargo, pasado el tiempo de vida útil de este plástico, es considerado como desecho. El PS al estar expuesto a condiciones atmosféricas como la radiación UV, se fragmenta dando como resultado la creación de microplásticos (MP), mismos que son pequeñas partículas que no sobrepasan los 5 mm, lo que representa una amenaza al medio ambiente pues, al degradarse, las propiedades decaen, se genera un cambio dimensional y, además, pueden ser fácilmente transportadas no solo al medio ambiente, sino también a los organismos. Este artículo de revisión se enfoca en evidenciar las principales rutas que siguen los MP al interaccionar con los seres humanos y los efectos potenciales de los PS-MP en el citoesqueleto, así como en resaltar la necesidad de más estudios al respecto.

Abstract Plastic has become very popular in recent years due to its durability and properties. Despite its many advantages, humanity has developed a certain dependence on this material, which represents an increase in its use and in turn, in waste. One of the most widely used plastic polymers is the polystyrene (PS), as is used in a wide range of applications due to its low cost and easy production, although after the useful life of the plastic, it is considered as waste. When plastic is exposure to atmospheric conditions such as UV radiation, it degrades and fragments giving rise to microplastics (MPs), which are defined as small particles that do not exceed 5 mm, representing a threat to the environment because when they degrade the properties decay, a dimensional change is generated and they can also be easily transported not only to the environment but also to organisms. This review article focuses on highlighting the main pathways that MPs follow when interacting with humans and the potential effects of PS-MPs on the cytoskeleton, as well as highlighting the need for more studies in this regard.

Resumen El compuesto plástico-madera es un material que combina sustancias distintas, como polímeros y polvo de madera, manteniendo sus identidades incluso después del procesamiento. Estos compuestos se utilizan ampliamente en aplicaciones como muebles, construcción y balcones debido a su durabilidad, resistencia y sostenibilidad. Este artículo bibliométrico tiene como objetivo analizar la producción científica sobre compuestos plástico-madera, identificando tendencias y avances. Utilizando la plataforma Scopus como base de datos, se seleccionaron 835 artículos publicados entre 2010 y 2022. China y Estados Unidos son los países más destacados en la investigación de estos compuestos. Los polímeros termoplásticos como polietileno, polipropileno y cloruro de polivinilo se utilizan ampliamente, al igual que las fibras de madera de especies como pino y eucalipto. Las técnicas de producción más comunes son la extrusión y la moldeo por inyección, mientras que los análisis mecánicos, la microscopía electrónica de barrido, la espectroscopía infrarroja, el análisis termogravimétrico y la calorimetría diferencial de barrido son las técnicas de caracterización más frecuentes. Estos compuestos plástico-madera han sido una opción sostenible y versátil, impulsando la innovación en la industria. Este análisis bibliométrico proporciona información relevante para el desarrollo futuro de materiales y procesos en esta área.

Resumo O compósito plástico-madeira é um material que combina substâncias distintas, como polímeros e pó de madeira, mantendo suas identidades mesmo após o processamento. Esses compósitos são amplamente utilizados em aplicações como móveis, construção civil e varandas devido à sua durabilidade, resistência e sustentabilidade. Este artigo bibliométrico tem como objetivo analisar a produção científica sobre compósitos plástico-madeira, identificando tendências e avanços. Utilizando a plataforma Scopus como base de dados, foram selecionados 835 artigos publicados entre 2010 e 2022. A China e os Estados Unidos são os países mais proeminentes na pesquisa desses compósitos. Polímeros termoplásticos, como polietileno, polipropileno e policloreto de vinila, são amplamente utilizados, assim como fibras de madeira provenientes de espécies como pinus e eucalipto. As técnicas de produção mais comuns são a extrusão e a moldagem por injeção, enquanto as análises mecânicas, microscopia eletrônica de varredura, espectroscopia de infravermelho, análise termogravimétrica e calorimetria diferencial de varredura são as técnicas de caracterização mais frequentes. Esses compósitos plástico-madeira têm sido uma escolha sustentável e versátil, impulsionando a inovação na indústria. Esta análise bibliométrica fornece informações relevantes para o desenvolvimento futuro de materiais e processos nessa área.

Abstract Composite plastic-wood is a material that combines distinct substances, such as polymers and wood powder, maintaining their identities even after processing. These composites are widely used in applications such as furniture, construction, and balconies due to their durability, strength, and sustainability. This bibliometric article aims to analyze scientific production on plastic-wood composites, identifying trends and advancements. Using the Scopus platform as a database, 835 articles published between 2010 and 2022 were selected. China and the United States are the most prominent countries in researching these composites. Thermoplastic polymers like polyethylene, polypropylene, and polyvinyl chloride are widely used, as are wood fibers from species such as pine and eucalyptus. The most common production techniques are extrusion and injection molding, while mechanical analysis, scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry are the most frequent characterization techniques. These plastic-wood composites have been a sustainable and versatile choice, driving innovation in the industry. This bibliometric analysis provides relevant information for the future development of materials and processes in this field.

Abstract This research evaluates the presence of the oxygen-inhibited layer (OIL) on the top surface of a photopolymerized dental composite resin protected with a glycerin layer. This evaluation was conducted using physical and mathematical methods. Polymerized discs were fabricated to evaluate Vickers microhardness (VHN), and pre-and post-polymerized samples were used for the calculation of C-O/C-H ratios through Fourier Transform Infrared Spectroscopy (FTIR) (n=10), using two types of glycerin, one for medical use (MG) and another for dental use (DG). Surface hardness decreased from MG to DG to CO, and the increase in C-O/C-H ratios decreased in the same order (p<0.05). Samples protected with medical and dental glycerin layers are harder and exhibit lower C-O/C-H bond ratios than the control group.

Resumen La presente investigación evalúa la presencia de la capa inhibida por oxígeno OIL en la última superficie fotocurada de una resina compuesta de uso odontológica que fue protegida con una capa de glicerina. Esta evaluación se hizo a partir de métodos físicos y matemáticos. Se fabricaron discos polimerizados para evaluar la microdureza Vickers (VHN) y pre y post polimerizados para el cálculo de tasas C-O/C-H por medio de Espectroscopía Infrarroja Transformada de Fourier (FTIR) (n=10) usando dos tipos de glicerina, una de uso médico (MG) y otra de uso dental (DG). La dureza superficial disminuyó de MG a DG a CO y el aumento de tasas C-O/C-H disminuyó en ese mismo orden (p<0,05). Las muestras protegidas con capas de glicerina médica y odontológica son más duras y presentan menos cantidad tasas de enlaces C-O/C-H que el grupo control.

Abstract: Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, and water-retaining polymer additives on the surface wear resistance of concrete pavings were investigated. Concrete pavings were poured in 2 stages and all of the bottom layers of samples were the same, but upper layers of pavings were produced by adding pyrite in the ratio of 0.10, 0.20, 0.30, 0.40 according to the mass of the aggregate, 5 kg /m2 corundum-based surface hardener to the paving surface area, and a high amount of water-absorbing polymer at a ratio of 0.05 and 0.10 to the water content of the mixture. Vertical abrasion, splitting tensile strength, water absorption, freeze-thaw resistance, pendulum footed friction, and surface hardness measurements with Schmidt test hammer experiments were made to TS 2824 EN 1338 standard. Also, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were carried out to characterize the produced materials. Results of the study indicate that the use of pyrite, corundum, and water-retaining polymers provided improvements in the surface wear resistance of concrete pavings

Abstract Metals, such as copper and silver, can be extremely toxic to bacteria at exceptionally low concentrations. Because of this biocidal activity, metals have been widely used as antimicrobial agents in a multitude of applications related with agriculture, healthcare, and the industry in general. A large number of microorganisms live in the human environment. if the balance of these creatures in nature is disturbed, the health of the individual and society will be threatened due to the production and emission of unpleasant odors and the reduction of health standards. The presence of microorganisms on textiles can cause adverse effects such as discoloration or staining on textiles, decomposition of fibrous materials, reduced strength, and eventually decay of textiles. Most fibers and polymers do not show resistance to the effects of microbes and by providing growth factors for microorganisms such as the right temperature and humidity, nutrients from sweat and fat from skin glands, dead skin cells as well as materials used in the stage of finishing the textiles causes the rapid growth and spread of various microbes. With the advent of nanotechnology, various industries and human daily life underwent changes. In recent years, increasing research on nanoparticles has led to the production of textiles with greater efficiency and added value. These modified textiles prevent the spread of unpleasant odors, the spread, and transmission of diseases. This article reviews the basics and principles of antimicrobial tetiles, as well as a brief overview of antimicrobial materials and nanostructures with antimicrobial properties. Metals silver concentrations activity agriculture healthcare general environment disturbed standards strength humidity glands nanotechnology changes years value diseases tetiles properties

Resumo Metais como cobre e prata podem ser extremamente tóxicos para bactérias em concentrações excepcionalmente baixas. Devido a esta atividade biocida, os metais têm sido amplamente utilizados como agentes antimicrobianos em uma infinidade de aplicações relacionadas à agricultura, saúde e indústria em geral. Muitos microrganismos vivem no ambiente humano e, se o equilíbrio dessas criaturas na natureza for alterado, a saúde dos indivíduos e da sociedade estará ameaçada devido à produção e emissão de odores desagradáveis e à redução dos padrões de saúde. A presença de microrganismos em têxteis pode causar efeitos adversos, como descoloração ou manchas, decomposição de materiais fibrosos, resistência reduzida e, eventualmente, deterioração. A maioria das fibras e polímeros não apresenta resistência aos efeitos dos micróbios e fornecem fatores de crescimento para os microrganismos, como temperatura e umidade adequadas, nutrientes do suor e gordura das glândulas da pele, células mortas da pele, bem como materiais usados na etapa de acabamento causando crescimento e disseminação de vários micróbios. Com o advento da nanotecnologia, diversas indústrias e o cotidiano humano passaram por mudanças. Nos últimos anos, o aumento da pesquisa em nanopartículas levou à produção de têxteis com maior eficiência e valor agregado. Esses têxteis modificados evitam a propagação de odores desagradáveis, a propagação e a transmissão de doenças. Este artigo analisa os fundamentos e princípios dos têxteis antimicrobianos, bem como uma breve visão geral dos materiais antimicrobianos e nanoestruturas com propriedades antimicrobianas. baixas biocida agricultura alterado adversos manchas fibrosos eventualmente deterioração adequadas pele nanotecnologia mudanças anos agregado doenças antimicrobianas

ABSTRACT: Chrysin flavonoid has been presented as having numerous and promising bioactive effects, such as antioxidant, anticonvulsant, antihypertensive, anti-inflammatory, antineoplastic, antihyperlipidemic, and antidepressant. However, one of the main challenges for advances in studies on the bioactivity of chrysin is its low bioavailability in humans. Thus, aiming to overcome this barrier, several studies have demonstrated the bioactive potential of capsules containing chrysin. The objective of this review was to present the main methodologies used for the encapsulation of chrysin, and its main biological effects demonstrated so far. Our intention is to offer ways to advancement of research in the area of flavonoid encapsulation. As for the encapsulation techniques, it was found that they are diverse, and the most recurrent encapsulating agents were PEG, PLGA polymers and their derivatives, in addition to other agents, such as PCL, albumin, lipids and chitosan.The bioactive effects of the capsules are also numerous, and anticarcinogenic effects are the most frequent, in addition to other effects such as antioxidant, antidiabetic, antimicrobial and neuroprotective. In conclusion, we verified a lack of use of green techniques for the encapsulation of chrysin, and the production of lipid-water emulsions and the dissolution of chrysin in ethanol seems to be alternatives in this regard. In addition, bioactive potential of these capsules can be evaluated in other experimental models, and should advance to clinical trials and application in food formulations. ABSTRACT antioxidant anticonvulsant antihypertensive antiinflammatory, antiinflammatory anti inflammatory, inflammatory anti-inflammatory antineoplastic antihyperlipidemic antidepressant However humans Thus barrier far diverse PEG derivatives PCL albumin chitosanThe chitosan frequent antidiabetic neuroprotective conclusion lipidwater lipid water regard models formulations

RESUMO: O flavonoide crisina tem sido apresentado como tendo numerosos e promissores efeitos bioativos, como antioxidante, anticonvulsivante, anti-hipertensivo, anti-inflamatório, antineoplásico, anti-hiperlipidêmico e antidepressivo. No entanto, um dos principais desafios para o avanço dos estudos sobre a bioatividade da crisina é sua baixa biodisponibilidade em humanos. Assim, visando superar essa barreira, diversos estudos têm demonstrado o potencial bioativo de cápsulas contendo crisina. O objetivo desta revisão é apresentar as principais metodologias utilizadas para o encapsulamento da crisina e seus principais efeitos biológicos demonstrados até o momento. Nossa intenção é oferecer caminhos para o avanço das pesquisas na área de encapsulação de flavonoides. Quanto às técnicas de encapsulamento, verificou-se que são diversas, e os agentes encapsulantes mais recorrentes são os polímeros PEG, PLGA e seus derivados, além de outros agentes como PCL, albumina, lipídeos e quitosana. Os efeitos bioativos das cápsulas também são numerosos, sendo os efeitos anticarcinogênicos os mais frequentes, além de outros efeitos como antioxidante, antidiabético, antimicrobiano e neuroprotetor. Em conclusão, verificamos a falta de utilização de técnicas verdes para o encapsulamento de crisina, e a produção de emulsões lipídeo-água e dissolução da crisina em etanol parecem ser alternativas neste aspecto. Além disso, o potencial bioativo destas cápsulas pode ainda ser avaliado em outros modelos experimentais, e deve-se avançar para ensaios clínicos e aplicação em formulações alimentícias. RESUMO antioxidante anticonvulsivante antihipertensivo, antihipertensivo anti hipertensivo, hipertensivo anti-hipertensivo antiinflamatório, antiinflamatório inflamatório, inflamatório anti-inflamatório antineoplásico antihiperlipidêmico hiperlipidêmico antidepressivo entanto humanos Assim barreira momento flavonoides verificouse verificou se diversas PEG derivados PCL albumina quitosana frequentes antidiabético neuroprotetor conclusão lipídeoágua lipídeo água aspecto disso experimentais devese deve alimentícias

ABSTRACT Techniques such as fertilization can be used more frequently to achieve higher crop yields. The problem of excessive use of fertilizers is related to losses of nutrients by leaching contaminating water bodies. Adopting controlled-release fertilizers may favor the reduction of losses and the total cost of fertilization as the number of applications is reduced. This research aimed to study the dynamics of nutrients from polymer-coated fertilizers (KNO3 controlled-release polymers) in sandy soil and analyze the spatial variation of soil solution storage at different depths when drip irrigation is adopted. Four soil boxes filled with Quartzipsamment and equipped with a mesh of 19 TDR probes were used to monitor soil moisture and electrical conductivity. Three soil boxes received the treatment of 50 g of the controlled-release polymer, and one soil box was used as a control. One liter of water was applied weekly through a drip irrigation system for ten weeks, followed by readings from the TDR probes to monitor the spatial variation of the soil solution storage in the soil profile. This monitoring allowed verifying that the release of nutrients happened slowly and gradually over the period without water retention by the material. The solution was displaced by advection (mass flow) and dispersion along with the irrigation water, which advanced more than the nutrients within the profile, reducing their leaching. Thus, controlled-release polymers maintained a slow and variable release over time. yields bodies controlledrelease controlled reduced polymercoated polymer coated KNO3 KNO (KNO adopted 1 conductivity 5 control weeks profile material mass flow Thus time

Aim In recent years, great advances have been made in the use of CAD/CAM to prepare fixed restorations. The marginal and internal fit of these restorations is a principal determinant for their clinical success. In addition, the nature of the oral environment affects the mechanical properties of these restorations. Therefore, this study aimed to investigate the effect of aging process under conditions that simulate the oral environment on the marginal adaptation, and, fracture resistance of crowns fabricated from polyether ether ketone (PEEK) using CAD/CAM methods. Methods Twenty identical crown restorations were fabricated by using CAD/CAM methods to mill polyether ether ketone (PEEK) material. These crowns were produced by using a software design of an epoxy resin replica of the prepared maxillary first premolar tooth. All PEEK crowns were cemented and randomly divided into two equal groups (A, B). Each group was divided into subgroups (A1, A2 and B1, B2). Group A1 and A2 were used to measure marginal adaptation and fracture resistance, respectively, before aging, while group (B1 and B2) were measured after aging. The cemented crowns were mounted in resin molds to facilitate the sectioning process. The measurements of the marginal gap were performed after sectioning at four points using a stereomicroscope. The fracture resistance of the crowns was investigated using a universal testing machine. A statistical analysis was performed using the GraphPad Prism® software version and unpaired Student’s t-test. Results The results revealed that aging affected the marginal gap, and the fracture resistance of the PEEK crowns. While aging, negatively affected the conditions under investigation, however the least significant difference of marginal gap was found in the margin region. Conclusions PEEK-CAD/CAM is considered as a good alternative prosthodontic material for fixed prostheses. The CAD/CAM technique used to make PEEK crown restorations in our study offers the advantages of high marginal accuracy and fracture resistance for long-term performance in the oral environment. years CADCAM CAD CAM success addition Therefore (PEEK tooth A, (A B. B . B) A1, (A1 B1 B2. B2 respectively (B stereomicroscope machine Prism Students Student s ttest. ttest t test. test t-test investigation region PEEKCAD/CAM PEEKCADCAM prostheses longterm long term PEEKCAD

Abstract The polymer transition temperature is a crucial parameter in the industry for knowing raw materials before starting the manufacturing process. The current work reports a novel low-cost prototype instrument to measure the transition temperature with reliable accuracy. The equipment was built using commercial load cells composed of strain gauges in combination with an Arduino® microcontroller. The prototype measurement quality was validated by measuring the transition temperatures of most commercial polymers. The obtained values were compared with values obtained by conventional thermal analysis known as differential scanning calorimetric and thermo-mechanical analysis (DSC and TMA), which results in identical values. process lowcost low cost accuracy Arduino microcontroller polymers thermomechanical thermo mechanical DSC TMA, TMA , TMA)

Abstract Polymer blends, derived from the combination of two or more polymers, yield novel materials with properties distinct from that of the original polymers. These materials have garnered interest in the medical field. However, for such applications the biocompatibility of the material must be evaluated. In this study, we prepared polymer blends from poly(ε-caprolactone) (PCL) and polypyrrole-block-poly(caprolactone) (PPy-b-PCL) using the casting method. The observed compatibility resulted from specific interactions between the carboxylic group of PCL and the amine group of PPy-b-PCL, as well as between the pyrrole ring of PPy-b-PCL and the CH2 group of PCL. Micro-Raman imaging revealed homogeneity in surface morphology, whereas thermogravimetric analysis indicated that the formation of polymer blends enhances the material’s thermal stability. Importantly, the results demonstrated that the addition of PPy-b-PCL does not affect the cytotoxicity to bovine fibroblasts, suggesting their biocompatibility and potential application in cattle veterinary devices. polymers field However evaluated study polyεcaprolactone poly ε caprolactone poly(ε-caprolactone (PCL polypyrroleblockpolycaprolactone polypyrrole block polypyrrole-block-poly(caprolactone PPybPCL PPy b (PPy-b-PCL method PPybPCL, PCL, CH MicroRaman Micro Raman morphology s stability Importantly fibroblasts devices

Abstract Large segmental tracheal defects can pose a serious clinical challenge owing to the lack of suitable substitutes for reconstructive surgery. Polymeric biomaterials are widely used in medicine. However, the implantation of biomaterials triggers a series of biological events, and material biocompatibility is of paramount importance in regenerative medicine. The objective of this study was to evaluate the use of a copolyamide associated with thermoplastic elastomer (PCTPE) in 3D-printed prostheses for repairing partial tracheal defects in rabbits. Sixteen male New Zealand White rabbits were used, and partial tracheal defects were created in the ventral region from the 4th to the 8th tracheal ring. The animals were subdivided into groups (n=4) based on the time of euthanasia, scheduled at seven days (G7), 15 days (G15), 30 days (G30), and 60 days (G60). Histopathological analysis with hematoxylin and eosin staining revealed that the 3D implant of PCTPE exhibited a foreign body reaction, and inflammation persisted for up to 60 days. Histochemistry with picrosirius red revealed a tendency for a greater amount of type I collagen to accumulate in the early stages of inflammation, whereas type III collagen was predominant in later evaluation periods. These findings suggest an exacerbated and inadequate tissue-material interface reaction and perpetuation of the inflammatory process. surgery medicine However events (PCTPE 3Dprinted Dprinted printed D th ring n=4 n4 n 4 (n=4 euthanasia G7, G7 G , (G7) 1 G15, G15 (G15) 3 G30, G30 (G30) 6 G60. G60 . (G60) periods tissuematerial tissue process n= (n= (G7 G1 (G15 G3 (G30 G6 (G60 (n (G (G1 (G3 (G6

Resumo Defeitos de grandes segmentos traqueais podem apresentar sério problema clínico, devido à ausência de substitutos na cirurgia reconstrutiva. Os biomateriais poliméricos estão entre os mais utilizados na medicina. Entretanto, a implantação de um biomaterial desencadeia uma série de eventos biológicos e a biocompatibilidade do material é de extrema importância para a medicina regenerativa. Objetivou-se com este estudo avaliar o uso da copoliamida associada ao elastômero termoplástico (PCTPE) em próteses impressas em 3D para reparação de defeitos parciais da traqueia de coelhos. Foram utilizados 16 coelhos machos da raça Nova Zelândia Branco, submetidos à criação de um defeito parcial de traqueia na região ventral do 4º ao 8º anel traqueal. Os animais foram subdivididos (n=4) de acordo com o momento das eutanásias, programadas com intervalo de sete (G7), quinze (G15), trinta (G30) e sessenta dias (G60). A análise histopatológica por hematoxilina e eosina (HE) revelou que o implante 3D de PCTPE apresentou reação do tipo corpo estranho e a inflamação persistiu até os 60 dias de avaliação. A histoquímica de picrosirius vermelho revelou tendência de maior quantidade de colágeno tipo I nos tempos iniciais de inflamação, enquanto o colágeno tipo III foi predominante nos períodos tardios de avaliação. Pode-se sugerir reação exacerbada e não adequada da interface tecido-material e perpetuação do processo inflamatório. clínico reconstrutiva Entretanto regenerativa Objetivouse Objetivou se (PCTPE D 1 Branco º traqueal n=4 n4 n 4 (n=4 eutanásias G7, G7 G , (G7) G15, G15 (G15) G30 (G30 G60. G60 . (G60) HE (HE 6 avaliação Podese Pode tecidomaterial tecido inflamatório n= (n= (G7 G1 (G15 G3 (G3 G6 (G60 (n (G (G1 (G6