Abstract Monkey mortality in Costa Rica is due, in most cases, to anthropogenic factors, such as deforestation, forest fragmentation, lack of tree connectivity, and tourism development in most coastal areas. The latter factor has caused the death of at least 450 monkeys per year due to electrocution, as a result of the increase in electrical wiring that has arisen in the different regions with urban development. Faced with this threat, proposals have been developed to avoid the danger, such as the construction of appropriate passage infrastructure for monkeys, the placement of insulated wiring, and the protection of electrical transformers. Using the morphometric measurements of the four species of monkeys native to Costa Rica (Alouatta palliata, Ateles geoffroyi, Saimiri oerstedii, and Cebus imitator), a model of safe and functional aerial passages or bridges for them was designed, the foundations of which are discussed in this article.

Resumen La mortalidad de los monos en Costa Rica se debe, en la mayoría de los casos, a factores antropogénicos, como la deforestación, la fragmentación de los bosques, la falta de conectividad arbórea y el desarrollo turístico en la mayoría de las zonas costeras. Este último factor ha provocado la muerte de al menos 450 monos por año debido a la electrocución, a raíz del aumento del cableado eléctrico que ha surgido en las diferentes regiones con desarrollo urbanístico. Ante esta amenaza se han elaborado propuestas para evitar el peligro, como la construcción de infraestructura de paso apropiada para los monos, la colocación de cableado aislado y la protección de los transformadores eléctricos. Utilizando las medidas morfométricas de las cuatro especies de monos nativas de Costa Rica (Alouatta palliata, Ateles geoffroyi, Saimiri oerstedii y Cebus imitator), se diseñó un modelo de pasos aéreos o puentes seguros y funcionales para ellos, cuyos fundamentos se discuten en el presente artículo.

Abstract (Introduction): The search for techniques and methods for managing sludge generated during wastewater treatment is necessary to ensure sustainable sanitation in the medium term in Latin America. An interesting approach involves converting sludge into a biosolid usable in agriculture through alkaline sanitization. (Objective): We evaluated this technique’s efficacy and economic and environmental viability for obtaining an agriculturally usable type A biosolid from municipal wastewater treatment plant (WWTP) sludge. (Methodology): To this end, the efficacy in reducing microbiological parameters was experimentally tested at the laboratory scale using quicklime, for anaerobic and aerobic WWTP sludge. The experimental results fed a benefit/cost analysis model and a life cycle assessment. (Results): It was confirmed that applying a 40 % lime dose allowed the obtention of a type A biosolid with non-detectable concentrations of pathogenic microorganisms, which remained in that condition for more than 30 days. Additionally, the benefit/cost and life cycle analyses concluded that this option would be more attractive than sludge disposal in a landfill, due to the corresponding savings in chemical compounds (fertilizers, agricultural lime). (Conclusions): Therefore, alkaline sanitization can be considered suitable for WWTP sludge management. Its application on a larger scale should be further investigated in the country and the Latin-American region, considering the risk associated to the presence of heavy metals too.

Resumen (Introducción): La búsqueda de técnicas y modelos de gestión del lodo generado durante el tratamiento de las aguas residuales es necesaria para garantizar un saneamiento sostenible a mediano plazo en América Latina. Una vía interesante consiste en convertir el lodo en un biosólido aprovechable en la agricultura por medio de la higienización alcalina. (Objetivo): Se evaluó la eficacia y la viabilidad económica y ambiental de esta técnica para la obtención de un biosólido tipo A aprovechable en la agricultura a partir de lodo de planta de tratamiento de aguas residuales (PTAR) ordinaria. (Metodología): Para ello se probó experimentalmente en escala de laboratorio la eficacia en el decaimiento de parámetros microbiológicos higienizados con cal viva, usando lodo anaeróbico y aeróbico de PTAR. Los resultados experimentales alimentaron un modelo de análisis de beneficio/costo y de ciclo de vida. (Resultados): Pudo corroborarse que la aplicación de dosis de cal de 40 % permitió obtener un biosólido tipo A con concentraciones de microorganismos patógenos no detectables, lo cual se mantuvo en esa condición por más de 30 días. Además, el análisis de beneficio/costo y de ciclo de vida permitieron concluir que esta opción sería más atractiva que la disposición del lodo en un relleno sanitario, debido al ahorro correspondiente en compuestos químicos (fertilizantes o cal agrícola) derivado de su aprovechamiento. (Conclusiones): Por lo tanto, la técnica de higienización alcalina puede considerarse como adecuada para la gestión del lodo de PTAR y su aplicación a mayor escala debe investigarse en mayor detalle en el país y la región latinoamericana, considerando también el riesgo de presencia de metales pesados en este subproducto.

ABSTRACT: This study adopted a more macroscopic perspective to focus on the issue of rural poverty in China. By selecting indicators reflecting various levels of poverty recurrence, considering risk factors across multiple dimensions, and employing advanced methods, we constructed a novel China Rural Poverty Recurrence Risk Index. We utilized a Markov switching model to delve into the mechanisms of poverty recurrence. Building upon this foundation, we developed an advanced poverty recurrence risk early warning system using a convolutional neural network-long short-term memory (CNN-LSTM) model. The system is optimized through mechanism-based predictions to better capture the dynamic changes in poverty recurrence. Empirical results demonstrated that the integrated dynamic monitoring and early warning system have significantly effective outcomes in addressing the recurrence of rural poverty. ABSTRACT dimensions methods Index foundation networklong network long shortterm short term CNNLSTM CNN LSTM (CNN-LSTM mechanismbased mechanism based

RESUMO: Este estudo adota uma perspectiva mais macroscópica para focar na questão da pobreza rural na China. Ao selecionar indicadores que refletem vários níveis de recorrência da pobreza, considerando factores de risco em múltiplas dimensões e empregando métodos avançados, construímos um novo indice de risco de recorrência da pobreza rural na China. Utilizamos um modelo de mudança de Markov para aprofundar os mecanismos de recorrência da pobreza. Com base nisso, desenvolvemos um sistema avançado de alerta precoce de risco de recorrência de pobreza usando um modelo de memória de longo e curto prazo de rede neural convolucional (CNN-LSTM). O sistema é optimizado através de previsões baseadas em mecanismos para melhor captar as mudanças dinâmicas na recorrência da pobreza. Os resultados empíricos demonstram que o sistema integrado de monitorização dinâmica e de alerta precoce tem resultados significativamente eficazes na abordagem da recorrência da pobreza rural. RESUMO China avançados nisso CNNLSTM. CNNLSTM CNN LSTM . (CNN-LSTM) (CNN-LSTM

ABSTRACT: The study of genotypic relationships between drought tolerance indices and agronomic traits of interest in wheat breeding is useful for designing selection strategies. The objective of this research was to investigate the cause-and-effect relationships between agronomic traits and drought tolerance indices through the analysis of canonical correlations. Two trials (control and stress) were conducted in winter 2020 in Viçosa, MG, Brazil. The traits evaluated were: (days for heading, plant height, mass and number of grains per spike, mass of one hundred grains, and grain yield). Grain yield data from the control and stress conditions were used to construct five drought tolerance indices. The data were subjected to mixed model analysis for estimation of genetic parameters and prediction of genotypic values (REML/BLUP), and then the genotypic values were used to calculate the correlation coefficients between the traits. Two groups of traits were established for the study of canonical correlations, the first group consisting of agronomic traits and the second by drought tolerance indices. There was a significant genotype effect for all evaluated traits. The canonical pairs were significant, which indicated the existence of dependence between the groups. Days to heading trait can be used in the indirect selection of wheat genotypes for drought tolerance. ABSTRACT strategies causeandeffect cause correlations 202 Viçosa MG Brazil days height spike yield. . yield) REML/BLUP, REMLBLUP REML/BLUP , REML BLUP (REML/BLUP) 20 (REML/BLUP 2

RESUMO: O estudo das relações genotípicas entre índices de tolerância à seca e caracteres agronômicos de interesse no melhoramento de trigo é útil para traçar estratégias de seleção. Objetivou-se com este trabalho investigar as relações de causa e efeito entre características agronômicas e índices de tolerância à seca via análise de correlações canônicas. Dois ensaios (controle e estresse) foram conduzidos no inverno de 2020 em Viçosa, MG, Brasil. Foram avaliados os caracteres (dias para o espigamento, altura da planta, massa e número de grãos por espiga, massa de cem grãos e rendimento de grãos). Os dados de produtividade dos ensaios de controle e estresse foram utilizados para construir cinco índices de tolerância à seca. Os dados foram submetidos à análise de modelos mistos para estimação dos parâmetros genéticos e predição dos valores genotípicos (REML/BLUP), em seguida, os valores genotípicos foram utilizados para calcular os coeficientes de correlação entre os caracteres. Dois grupos de caracteres foram estabelecidos para o estudo das correlações canônicas, sendo o primeiro grupo constituído pelas variáveis agronômicas e o segundo pelos índices de tolerância à seca. Houve efeito significativo de genótipo para todas as características avaliadas. Os pares canônicos foram significativos, o que indicou a existência de dependência entre os grupos. O caráter dias para o espigamento pode ser utilizado na seleção indireta de genótipos de trigo para tolerância à seca. RESUMO Objetivouse Objetivou se canônicas 202 Viçosa MG Brasil planta espiga grãos. . grãos) REML/BLUP, REMLBLUP REML/BLUP , REML BLUP (REML/BLUP) seguida avaliadas significativos 20 (REML/BLUP 2

ABSTRACT The estimation of evapotranspiration (ET) and crop water requirements are crucial for the proper management and allocation of water resources in terms of quantity, quality, and timeliness. Therefore, remote sensing estimation of ET using the SEBAL algorithm (Surface Energy Balance Algorithm for Land) can provide spatio-temporal, non-punctual data, unlike traditional calculations relying on the nearest meteorological station. This research analyzed ET using SEBAL, based on ten Landsat 8 satellite images processed with a program developed in the Model Builder of ArcGis® version 10.2. The analysis was conducted during the vegetative period of starchy corn from May to October 2016. Validation of the results happened with a drainage lysimeter installed in a monitoring plot. Additionally, the statistical indices - such as percentage relative error (PRE) (0,09), root mean square error (RMSE) (0,30), R2 (0,92), and Nash-Sutcliffe efficiency (NASH) (0,91) - indicated a good correlation of ET for starchy corn in the central highlands of Peru. The ET identified at ten monitoring points ranged from 1,05 to 7,79 mm d-1. (ET quantity quality timeliness Therefore Surface Land spatiotemporal, spatiotemporal spatio temporal, temporal spatio-temporal nonpunctual non punctual data station ArcGis 102 10 2 10.2 2016 plot Additionally PRE (PRE 0,09, 009 0,09 , 0 09 (0,09) RMSE (RMSE 0,30, 030 0,30 30 (0,30) R 0,92, 092 0,92 92 (0,92) NashSutcliffe Nash Sutcliffe NASH (NASH 0,91 091 91 (0,91 Peru 105 1 05 1,0 779 7 79 7,7 d1. d1 d 1. d-1 10. 201 00 0,0 (0,09 03 0,3 3 (0,30 0,9 9 (0,92 (0,9 1, 77 7, d- 20 0, (0,0 (0,3 (0, (0 (

ABSTRACT Due to the importance of grain production, and the need to work the soil under limited moisture, the aim of this study was to develop computer software to predict the tractive capacity of wheeled tractors for two types of tyre, the effect of different inflation pressures and levels of soil moisture. A mathematical model was developed to predict the tractive capacity of a 4 x 2 AFT tractor. Software was developed and tested by comparing the computational data with those from tests of a working tractor in the field. The parameters under evaluation were drawbar force and front and rear drive wheel slip. At both moisture levels, the bias tyres had the lowest front to rear slip ratio at the lower pressure; the ratios were similar when equipped with radial tyres. The bias tyres show maximum force at a slip ratio of 1.09 at the higher pressure and 1.03 at the lower, while for the radial tyres the ratio was 1.05 at the higher pressure and 1.07 at the lower. Software was developed to process data from the model, with the results used for estimating the tractive force of the tractor. The tractive force was overestimated by the model, which needs further adjustment for direct application in the field. production tyre field 109 1 09 1.0 103 03 105 05 107 07 10 0 1.

This paper presents the stages of an acceleration program focused on chemical technologies. We demonstrate how this initiative contributes to the creation of new businesses, startups, and technology licensing from research developed at Brazilian universities. The case of the program Escale-se is discussed. There were 66 technologies submitted, and 14 were selected for the pre-acceleration phase. In this phase, various contents were worked on, such as creating a business model and aspects of scaling hard-science technologies. Teams were evaluated by panels with market specialists, and 6 were selected for the second phase: pre-scaling/proof of concept. Here, proponents were encouraged to validate the business model by connecting with potential clients and partners, as well as planning the development and testing of the product in a relevant environment. Finally, one team was classified for the last stage: scaling/go-to-market - where they received R$ 100,000.00 to scale up their technology and create strategies for raising investments. Four of the fourteen technologies selected for the program opened National Register of Legal Entities (CNPJ) and raised approximately R$ 4.5 M in investments from different sources. These results demonstrate that the methodology contributed to the entrepreneurial development of participating researchers and the raising of funds for the businesses created. startups universities Escalese Escale se discussed submitted 1 preacceleration pre phase hardscience hard science specialists prescaling/proof prescalingproof scaling/proof proof concept Here partners environment Finally stage scaling/gotomarket scalinggotomarket scaling/go go R 10000000 100 000 00 100,000.0 CNPJ (CNPJ 45 4 5 4. sources created prescaling scalingproof gotomarket scalinggo 1000000 10 0 100,000. 100000 100,000 10000 100,00 1000 100,0 100,

The increase in the average temperature of the Earth due to excess CO2 and other greenhouse gases has caused glaciers to melt and sea levels to rise. The burning of fossil fuels is one of the main causes of this problem, so the use of biofuels is important for mitigating this environmental impact. In Brazil, biodiesel is mixed with mineral; however, irregularities have been detected, reducing the expected positive effects. Therefore, this study proposes the use of multivariate curve resolution with alternating least squares (MCR ALS) to quantify the content of methyl palm oil biodiesel in diesel blends and determine the concentration of the adulterant automotive lubricating oil in the blend. The model for quantifying biodiesel in diesel obtained R2 = 0.9997, root mean square error of calibration (RMSEC) = 0.56% (v v-1) and prediction (RMSEP) = 0.65% (v v-1), while the determination of adulteration in the biodiesel-diesel blend showed RMSEC = 0.67% (v v-1), RMSEP = 0.81% (v v-1) and R2 = 0.9992. These results demonstrate the ability of the models developed to predict both the content and quantity of possible adulterants in blends of palm oil biodiesel and mineral diesel, contributing to the quality control of this fuel. CO rise problem impact Brazil however detected effects Therefore MCR ALS R 09997 0 9997 0.9997 (RMSEC 056 56 0.56 v v1 1 v-1 (RMSEP 065 65 0.65 v1, , biodieseldiesel 067 67 0.67 081 81 0.81 09992 9992 0.9992 fuel 0999 999 0.999 05 5 0.5 v- 06 6 0.6 08 8 0.8 099 99 0.99 0. 09 9 0.9

APPLICATION OF MASS SPECTROMETRY WITH PAPER SPRAY IONIZATION AND THE OPLS-DA CHEMOMETRIC METHOD FOR THE DIAGNOSIS OF PROSTATE CANCER BY ANALYSIS OF URINE SAMPLES. In this study, paper spray ionization mass spectrometry (PSI-MS) allied to orthogonal projections on the latent structure-discrimination analysis (OPLS-DA) was employed to differentiate urine samples from patients with prostate cancer and control individuals (without prostate cancer). The parameters of sensitivity, specificity, efficiency and Matthew’s correlation coefficient determined to analyze the efficiency and quality of the OPLS-DA model obtained a value equal to 1, which means, respectively, that the model has a good performance to correctly classify true positive samples and true negatives. These results showed 100% correct classification of the samples from the training and test set, demonstrating a high efficiency of the OPLS-DA model when classifying all samples considered as belonging to the class of interest (urine from control patient) into class 1 and all samples considered as belonging to the non-interest class (urine from patients with prostate cancer) in class 0. This efficiency resulting from the application of this model suggests that the PSI-MS combined to OPLS-DA is a promisor approach for a rapid diagnosis of prostate cancer, via chemical fingerprints of urine samples. OPLSDA OPLS DA SAMPLES study PSIMS PSI MS (PSI-MS structurediscrimination structure discrimination (OPLS-DA without cancer. . sensitivity specificity Matthews Matthew s means respectively negatives 100 set patient noninterest non 0 10

The rapid advance of nanotechnology has led to the proliferation of a wide range of water-soluble nanomaterials and therefore, a profound impact on the environment, underscoring the need to devise effective methods for isolating and confining these nanomaterials. This study presents the development of a highly effective system capable of removing and storing gold nanoparticles in solution using modified resins with different linking groups, such as tris(2-aminoethyl) amine, 3-mercaptopropionic acid, 11-mercaptoundecanoic acid, and L-cysteine. The catalytic properties of the resins functionalized with the thiol group containing gold nanoparticles were evaluated, using the reduction of the nitro compounds (3,5-dinitrosalicylic acid, 4-nitroguaiacol and 4-nitroaniline) as model reaction. Solid-phase organic synthesis was employed to prepare the modified resins and their interaction with gold nanoparticles was characterized using infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy-energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The removal capacity of the resins was evaluated using ultraviolet-visible optical emission spectroscopy and inductively coupled plasma techniques. Ultraviolet-visible technique was suitable to assess the catalytic properties of the functionalized resins containing gold nanoparticles. It was determined that the functionalized resins showed remarkable capacity for complex gold nanoparticles, removing them from the solution. The most significant removal was with 11-mercaptoundecanoic acid. watersoluble water soluble therefore environment groups tris2aminoethyl trisaminoethyl tris 2 aminoethyl tris(2-aminoethyl amine 3mercaptopropionic mercaptopropionic 3 acid 11mercaptoundecanoic mercaptoundecanoic 11 Lcysteine. Lcysteine L cysteine. cysteine L-cysteine 3,5dinitrosalicylic 35dinitrosalicylic dinitrosalicylic 3,5 5 4nitroguaiacol nitroguaiacol 4 4nitroaniline nitroaniline 4-nitroaniline reaction Solidphase Solid phase analysis microscopyenergy microscopy energy Xray X ray ultravioletvisible ultraviolet visible techniques Ultravioletvisible Ultraviolet 1 5dinitrosalicylic 35 3,

In this study, it was investigated chitosan (CHIT) films in the presence or absence of cellulose nanofibers (CNF) and silver nanoparticles (AgNP), whose chemical interactions involving metallic surfaces were characterized by surface-enhanced Raman scattering (SERS) spectroscopy. Changes in the morphology were analyzed through atomic force microscopy (AFM) and scanning electron microscopy (SEM). SEM and AFM micrographs revealed that the incorporation of CNF significantly altered CHIT films, leading to changes in the polymer topography and surface texture due to intimal interactions between CNF and the CHIT matrix. Raman spectra of CHIT and CNF/CHIT films showed similar profiles, reflecting comparable molecular structures of both modified biopolymers. However, SERS spectra of both films, after recovering with AgNP, demonstrated distinct spectral profiles. Innovatively, density functional theory (DFT) calculations of an oligomer model for CHIT were employed to assign the vibrational modes observed in the SERS spectra, which allowed identify key interactions between CHIT moieties and AgNP surfaces. SERS results revealed that chemical adsorption of CHIT on AgNP surfaces occurs through interactions of glycosidic oxygen and amino groups. Such findings provide insights into the structural and chemical behavior of this nanocomposite, highlighting its potential for advanced biological applications. study (CHIT (CNF , (AgNP) surfaceenhanced enhanced (SERS spectroscopy (AFM SEM. . (SEM) matrix CNFCHIT profiles biopolymers However Innovatively DFT (DFT groups nanocomposite applications (AgNP (SEM

Worldwide, millions of people suffer from neurological and psychiatric conditions, such as schizophrenia, depression, and neurodegenerative diseases. These conditions are often linked to hyperactivity of monoamine oxidase B (MAO-B) in the brain, and inhibiting this enzyme can reduce oxidative stress, stabilize neurotransmitter levels, and alleviate symptoms. In this context, a pharmacophoric model was created using PharmaGist with 31 hits extracted from BindingDB to enable a pharmacophoric-based search of potential MAO-B inhibitors in ZincPharmer’s chemical space, followed by the building of 10 conformers for each molecule in the software OMEGA, screening for structural and electrostatic similarity to safinamide using ROCS (Rapid overlay of chemical structures) and EON (Electrostatic similarity for lead-hopping), respectively. In addition, the molecular docking with Gold using the score function was performed to rank the ligands with the highest probabilities of affinity to MAO-B and then discriminate those with suitable physical chemical, pharmacokinetic, and toxicological features using the tools QikProp, SwissADME, and DEREK. Four potential ligands with selective MAO-B inhibitor properties were identified, which show promise as future therapeutic agents for MAO-B-related disorders. Worldwide schizophrenia depression diseases MAOB MAO (MAO-B brain stress levels symptoms context 3 pharmacophoricbased based ZincPharmers ZincPharmer s space 1 OMEGA Rapid structures Electrostatic leadhopping, leadhopping lead hopping , lead-hopping) respectively addition pharmacokinetic QikProp SwissADME DEREK identified MAOBrelated related disorders lead-hopping

ABSTRACT: Based on the data of China’s overseas arable land investment in 47 countries along the “Belt and Road”, the Tobit model is used to analyze the effects of cultural distance and friendship cities on the production rates of contracted arable land in China’s overseas arable land investment. This study provided theoretical basis and empirical support for promoting China’s agricultural “going abroad” and improving the production rates of contracted arable land in China’s overseas arable land investment. The results show that differences in cultural distance, power distance and the degree of uncertainty avoidance have significant positive effects on the production rates of contracted arable land in China’s overseas arable land investment, and differences in individualism have a significant negative effect on the production rates. Friendship city has a positive but insignificant effect on the production rates, meanwhile, it also weaken the positive impact of cultural distance on production rates of contracted arable land in China’s overseas arable land investment. The proportion of joint ventures with host country, the economic level and institutional environment of the host country will all have an impact on the production rates. Finally, recommendations are proposed to promote the production rates of contracted arable land, such as focusing on the positive role of cultural distance, establishing friendship cities, and investing host countries with high potential precisely. ABSTRACT Chinas China s 4 Belt Road, Road , Road” going abroad meanwhile Finally precisely

RESUMO: Com base nos dados do investimento da China em terras aráveis no exterior em 47 países ao longo do “Cinturão e Rota”, o modelo Tobit é utilizado para analisar os efeitos da distância cultural e das cidades amigas nas taxas de produção de terras aráveis contratadas no investimento da China em terras aráveis no exterior. Os resultados mostram que as diferenças na distância cultural, na distância de poder e no grau de prevenção de incertezas têm efeitos positivos significativos sobre as taxas de produção de terras aráveis contratadas no investimento em terras aráveis no exterior da China, e as diferenças no individualismo têm um efeito negativo significativo sobre as taxas de produção. As cidades amigas têm um efeito positivo, mas insignificante, sobre as taxas de produção, enquanto estas podem enfraquecer o impacto positivo da distância cultural sobre as taxas de produção de terras aráveis contratadas no investimento em terras aráveis no exterior da China. A proporção de investimento cooperativo entre a China e o país anfitrião, o nível econômico e o ambiente institucional do país anfitrião terão um impacto sobre as taxas de produção. Por fim, são propostas recomendações para promover as taxas de produção das terras aráveis contratadas, tais como a concentração no papel positivo da distância cultural, a criação de cidades da amizade e o investimento em países de acolhimento com elevado potencial. RESUMO 4 Cinturão Rota, Rota , Rota” insignificante fim potencial

The sixth IPCC report states that a proper conception of climate justice that can address the complexity of the phenomenon of anthropogenic climate change as a whole requires considering not only one but rather three dimensions of justice today: redistributive, procedural, and recognition dimensions. In this article, my focus is on exploring the latter dimension, drawing special attention to climate policies addressing cultural-identity issues. In the first section, I illustrate how climate policies can be connected to discriminatory practices against minority cultures and their identities. To do so, I take the struggles of Black movements against environmental racism and the struggles of Indigenous peoples against a colonialist cultural heritage as case studies. In the second section, I look into the most advanced normative model to address the dimension of recognition, its advantages, and how it addresses the so-called ‘institutionalization of cultural patterns’ in climate policies: the Nancy Fraser model. Finally, in the third section, I investigate an aspect that remains open. It concerns the matter of how to use institutional authority to ‘deinstitutionalize’ non-ecological cultural patterns, while respecting pluralism and avoiding falling into the risks of institutional paternalism. today redistributive procedural article culturalidentity identity issues section identities so studies advantages socalled called institutionalization patterns Finally open ‘deinstitutionalize deinstitutionalize nonecological non ecological paternalism

RESUMO: O uso de métodos não destrutivos e de baixo custo para determinação de área foliar tem ganhado importantes aplicações. Os objetivos da pesquisa foram (i) propor um método não destrutivo para estimar a área foliar da cultura da mamona e (ii) construir equações que estimem com precisão e rapidez a área foliar da espécie. Foram coletadas mil folhas sadias e expandidas de cinco cultivares de mamona (New Zealand Purple, Sipeal, Carmencita, Amarelo de Irecê e IAC-80), sendo coletadas 200 folhas de cada uma. O comprimento máximo, largura máxima e área foliar foram calculados para cada folha. Foi calculado o produto entre comprimento e largura (LW). Foram realizados testes com diferentes modelos de regressão linear e não linear entre área foliar e dimensões lineares das folhas de cada cultivar. Os modelos utilizados foram linear, linear sem intercepto e potência. Os critérios para escolha dos melhores modelos para estimar a área foliar da mamona foram maior coeficiente de determinação, maior coeficiente de correlação linear de Pearson, menor critério de informação de Akaike, maior índice de concordância de Willmott e menor raiz do erro quadrático médio. As equações que apresentaram melhores critérios para estimativa da área foliar das cultivares de mamona foram aquelas que utilizaram o produto entre comprimento e largura, em comparação às equações que utilizaram apenas uma dimensão foliar. O modelo ŷ = 0,439 × LW pode ser utilizado para estimar com precisão e rapidez a área foliar da mamona por meio de medidas lineares das folhas, utilizando o produto entre comprimento e largura (LW), independente da cultivar escolhida. RESUMO aplicações i (i ii (ii espécie New Purple Sipeal Carmencita IAC80, IAC80 IAC 80 , IAC-80) 20 máximo folha LW. . (LW) potência Pearson Akaike médio 0439 0 439 0,43 LW, escolhida IAC8 8 IAC-80 2 (LW 043 43 0,4 IAC-8 04 4 0, IAC-

ABSTRACT: Using non-destructive and low-cost methods to determine leaf area has gained important applications. The research objectives were (i) to propose a non-destructive method to estimate the leaf area of castor bean crops and (ii) to build equations that accurately and quickly estimate the leaf area of specie. One thousand healthy and expanded leaves of five castor bean cultivars (New Zealand Purple, Sipeal, Carmencita, Amarelo de Irecê, and IAC-80) were collected, and 200 leaves were collected from each. The maximum length, maximum width, and leaf area were calculated for each leaf. The product between length and width (LW) were calculated. We performed tests with different linear and non-linear regression models between leaf area and linear leaf dimensions of each cultivar. The models used were linear, linear without intercept, and power. The criteria for choosing the best models to estimate the leaf area of castor beans were a higher coefficient of determination, more elevated Pearson’s linear correlation coefficient, lower Akaike information criterion, higher Willmott agreement index, and smallest root mean square error. The equations that presented the best criteria for estimating the leaf area of castor bean cultivars were those that used the product between length and width, compared to equations that used only one leaf dimension. The model ŷ = 0.439 × LW can be used to accurately and quickly estimate the castor bean leaf area through linear measurements of the leaves, using the product between length and width (LW), regardless of the cultivar chosen. ABSTRACT nondestructive non destructive lowcost low cost applications i (i ii (ii specie New Purple Sipeal Carmencita Irecê IAC80 IAC 80 IAC-80 20 (LW nonlinear intercept power determination Pearsons Pearson s criterion index error dimension 0439 0 439 0.43 LW, , chosen IAC8 8 IAC-8 2 043 43 0.4 IAC- 04 4 0.