EFFECT OF LIQUID SWINE WASTEWATER DOSES ON PHYSICAL, CHEMICAL AND ELECTROCHEMICAL ATTRIBUTES IN A CERRADO OXISOL. The addition of organic residues enhances soil and plant organic matter and nutrient content. To gauge the impact of varying liquid swine waste (LSW) levels on soil, we studied changes in a clayey Oxisol’s physical, chemical, and electrochemical traits from the Cerrado. LSW doses (0, 50, 150, 450, 600 m3 ha−1) were applied to the 0-0.20 m layer in a randomized design with three replicates. Post a 30-day incubation at 60% field capacity, the soil underwent mineralogical, physical (clay dispersed in water - CDW), chemical (sodium adsorption ratio - SAR, cation exchange capacity - CEC, base saturation - V%), and electrochemical (pH in H2O and KCl, ApH, point of zero charge - PZC, point of zero salt effect - PZSE, surface electric potential - iµo, and electrical conductivity - EC) analyses. The levels of exchangeable Ca, K, Mg, Na, and available P increased with increasing LSW doses. Increasing LSW doses in the soil led to an increase in EC, but soil salinization was not observed at the highest dose. With the application of LSW doses, there was a decrease in pH, ApH, PZSE, and an increase in CEC, PZC and ψo. Despite the increase in ψo, low clay dispersibility was observed. PHYSICAL OXISOL content (LSW Oxisols Oxisol s Cerrado 0, 0 (0 50 150 450 60 ha−1 ha1 ha 1 00.20 0020 0.20 20 0-0.2 replicates 30day day 30 mineralogical CDW, CDW , CDW) sodium SAR CEC V%, V V% V%) pH HO H O KCl ApH PZSE iµo EC analyses Ca K Mg Na dose ψo ( 5 15 45 6 ha− 00 00.2 002 020 0.2 2 0-0. 3 4 00. 02 0. 0-0 0-

This review provides an overview of the recent progress in organic electrosynthesis in Brazil, ranging from 2013 to 2023. By highlighting the principles, applications, and limitations of various electrosynthetic methodologies, this article aims to contribute to the understanding of basic principles and stimulate research in this field in Brazil. Moreover, the limitations and challenges associated with organic electrosynthesis are covered. Factors such as electrode material selection, solvent effects, and reaction optimization are discussed, highlighting the need for further research and development to overcome these obstacles. Finally, future prospects are outlined. Brazil 201 2023 applications methodologies Moreover covered selection effects discussed obstacles Finally outlined 20 202 2

In recent years, the field of coordination chemistry has experienced a surge in interest regarding the synthesis and characterization of coordination complexes for diverse applications. This study is dedicated to investigating coordination compounds resulting from the interaction of nonsteroidal anti-inflammatory drugs (NSAIDs) with metal ions. The study research places significant emphasis on understanding the stability and thermal behavior of these coordination compounds. The utilization of thermoanalytical techniques is crucial in achieving this goal. Thermal analysis and thermokinetics provide valuable insights into the underlying mechanisms, kinetics, and energetics of these reactions, thereby facilitating the optimization of synthesis procedures. The research employs concurrent techniques, namely thermogravimetric analysis (TG) and differential scanning calorimetry (DSC), to explore the thermal stability and decomposition pathways of these coordination compounds. Thermokinetic models and optimization methodologies are subsequently applied to identify key reaction parameters. The primary aim of this research is to unveil the thermal behavior, stability, and reaction kinetics of aceclofenac coordination compounds, thus contributing significantly to the understanding of thermokinetics and thermal analysis in the domain of coordination chemistry. Specifically, this study is focused on aceclofenac coordination complexes involving lanthanum and gadolinium, with the ultimate goal of advancing the field of coordination chemistry. years applications antiinflammatory anti inflammatory NSAIDs (NSAIDs ions mechanisms reactions procedures TG (TG DSC, DSC , (DSC) parameters Specifically gadolinium (DSC

Chitosan (CS) blends with collagen (CL) and Aloe vera (AV) have gained significant attention in the biomedical field due to their biocompatibility, biodegradability, and potential for wound healing applications. In this study, we investigated the preparation and characterization of CS/CL and CS/AV blends using selective precipitation and co-precipitation techniques. The synthesis processes were analyzed for yield and 4-hydroxyproline content (in CS/CL blends). The materials were characterized using bromatological analyses, viscosity measurements, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). These eco-friendly methods effectively promoted interactions between the biopolymers, resulting in homogeneous blends with tunable properties. Besides, they are simple, fast, safe, and require minimal infrastructure. This study demonstrated that selective precipitation and co-precipitation are effective methods for producing chitosan/collagen and chitosan/Aloe vera blends. These methods foster interactions and miscibility between the biopolymers, as confirmed by FTIR, XRD, viscosity, and 4-Hy content analyses. They also align with green chemistry principles by avoiding organic solvents, reducing environmental risks, and minimizing waste. The high yields achieved, especially for CS/AV blends (exceeding 96%), make these materials compatible with lyophilization procedures. The absence of segregated phases after appropriate washing underscores their suitability for pharmaceutical formulations and other applications. CS (CS CL (CL AV (AV biocompatibility biodegradability applications CSCL CSAV coprecipitation co techniques 4hydroxyproline hydroxyproline 4 . blends) analyses measurements Fouriertransform Fourier transform FTIR , (FTIR) Xray X ray XRD (XRD) SEM. SEM (SEM) ecofriendly eco friendly biopolymers properties Besides simple fast safe infrastructure chitosancollagen chitosan chitosanAloe 4Hy Hy solvents risks waste achieved exceeding 96%, 96 96% 96%) procedures (FTIR (XRD (SEM 9

ABSTRACT Chia (Salvia hispanica L.) seeds have attracted great economic interest for their high levels of linoleic and α-linolenic acids. In Brazil, there is a lack of studies on the agronomic characteristics and physiological quality of chia, necessitating research on germination processes and strategies to enhance yield under field conditions. There are no studies assessing the development of seeds with different coat colors in the presence of fungicides. This study aimed to assess the physiological quality of chia seeds as a function of coat color and fungicide treatment. The experiment followed a completely randomized design with a 2 × 2 factorial arrangement and six replications. For this, seeds were divided into two groups according to coat color (black and white) and subjected or not to treatment with carboxin + thiram. Germination speed index, germination rate, and shoot length were evaluated in plants sown at 0, 90, and 180 days after seed treatment. Germination rate and speed index differed significantly between coat colors, with white seeds having higher vigor than black seeds. Shoot length, however, differed only for seeds sown on the day of treatment, indicating that treated seeds were more vigorous. Salvia L. L αlinolenic α linolenic acids Brazil conditions fungicides replications this thiram 0 90 18 however vigorous 9 1

ABSTRACT Due to the importance of grain production, and the need to work the soil under limited moisture, the aim of this study was to develop computer software to predict the tractive capacity of wheeled tractors for two types of tyre, the effect of different inflation pressures and levels of soil moisture. A mathematical model was developed to predict the tractive capacity of a 4 x 2 AFT tractor. Software was developed and tested by comparing the computational data with those from tests of a working tractor in the field. The parameters under evaluation were drawbar force and front and rear drive wheel slip. At both moisture levels, the bias tyres had the lowest front to rear slip ratio at the lower pressure; the ratios were similar when equipped with radial tyres. The bias tyres show maximum force at a slip ratio of 1.09 at the higher pressure and 1.03 at the lower, while for the radial tyres the ratio was 1.05 at the higher pressure and 1.07 at the lower. Software was developed to process data from the model, with the results used for estimating the tractive force of the tractor. The tractive force was overestimated by the model, which needs further adjustment for direct application in the field. production tyre field 109 1 09 1.0 103 03 105 05 107 07 10 0 1.

The rapid advance of nanotechnology has led to the proliferation of a wide range of water-soluble nanomaterials and therefore, a profound impact on the environment, underscoring the need to devise effective methods for isolating and confining these nanomaterials. This study presents the development of a highly effective system capable of removing and storing gold nanoparticles in solution using modified resins with different linking groups, such as tris(2-aminoethyl) amine, 3-mercaptopropionic acid, 11-mercaptoundecanoic acid, and L-cysteine. The catalytic properties of the resins functionalized with the thiol group containing gold nanoparticles were evaluated, using the reduction of the nitro compounds (3,5-dinitrosalicylic acid, 4-nitroguaiacol and 4-nitroaniline) as model reaction. Solid-phase organic synthesis was employed to prepare the modified resins and their interaction with gold nanoparticles was characterized using infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy-energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The removal capacity of the resins was evaluated using ultraviolet-visible optical emission spectroscopy and inductively coupled plasma techniques. Ultraviolet-visible technique was suitable to assess the catalytic properties of the functionalized resins containing gold nanoparticles. It was determined that the functionalized resins showed remarkable capacity for complex gold nanoparticles, removing them from the solution. The most significant removal was with 11-mercaptoundecanoic acid. watersoluble water soluble therefore environment groups tris2aminoethyl trisaminoethyl tris 2 aminoethyl tris(2-aminoethyl amine 3mercaptopropionic mercaptopropionic 3 acid 11mercaptoundecanoic mercaptoundecanoic 11 Lcysteine. Lcysteine L cysteine. cysteine L-cysteine 3,5dinitrosalicylic 35dinitrosalicylic dinitrosalicylic 3,5 5 4nitroguaiacol nitroguaiacol 4 4nitroaniline nitroaniline 4-nitroaniline reaction Solidphase Solid phase analysis microscopyenergy microscopy energy Xray X ray ultravioletvisible ultraviolet visible techniques Ultravioletvisible Ultraviolet 1 5dinitrosalicylic 35 3,

Resumo Este artigo tem como objetivo descrever e analisar o processo de preservação e de refuncionalização do patrimônio industrial do Vale do Ruhr a partir de uma pesquisa de campo realizada na região entre outubro de 2023 e julho de 2024. Para tal finalidade, iniciaremos contextualizando o processo de industrialização e de desindustrialização ocorridos nos últimos 150 anos, no Vale do Ruhr, demonstrando suas conexões com a urbanização da área, bem como com a construção de uma identidade coletiva local fundamentada na memória do passado mineiro e industrial. Em seguida, demonstraremos como ocorreu o processo político e econômico que levou à formação da Rota do Patrimônio Industrial do Ruhr, um conjunto de espaços industriais de interesse histórico agora protegidos e reconvertidos a novas finalidades. 202 2024 finalidade 15 anos área seguida finalidades 20 1 2

Abstract This article aims to describe and analyze the process of preservation and repurposing of industrial heritage in the Ruhr Valley based on field research conducted in the region between October 2023 and July 2024. To achieve this, we will begin by contextualizing the industrialization and deindustrialization process that has been occurring over the last century and a half in the Ruhr Valley. We will demonstrate its connections with the urbanization of the area and the construction of a local collective identity grounded on the memory of the mining and industrial past. Then, we will explore the political and economic processes that led to the formation of the Ruhr Industrial Heritage Route, a collection of industrial sites of historical interest now protected and repurposed. 202 2024 this past Then Route repurposed 20 2

RESUMO O pimentão, cultura de importância nutricional, destaca-se por seu valor de vitamina C. Diante da necessidade de práticas agrícolas sustentáveis, o estudo explorou o uso de biocarvões derivados de resíduos regionais como alternativa na cultura de pimentão. Nesse contexto, objetivou-se avaliar o efeito de biocarvões provenientes de cama de frango, fibra de coco e palha de arroz, nas características biométricas e físico-químicas de frutos de pimentão verde, na produção de frutos por planta e na produtividade. A pesquisa foi conduzida em campo no delineamento em blocos casualizados, em esquema fatorial 5 × 3 + 1, referentes a cinco doses de biocarvão (0, 3, 6, 9 e 12 t ha-1) e três tipos de biocarvão (fibra de coco, cama de aviário e palha de arroz) com quatro repetições, mais um tratamento adicional (adubação mineral). Foram avaliadas variáveis biométricas (comprimento e diâmetro dos frutos, espessura da casca, número de frutos, massa do fruto) e físico-químicas dos frutos (sólidos solúveis, acidez titulável, pH, vitamina C e teor de cinzas), produção e produtividade dos frutos. A produção de frutos de pimentão verde não foi influenciada pelos biocarvões, porém as doses de biocarvões influenciaram todas as variáveis analisadas com exceção da espessura da casca. Os teores de vitamina C e de sólidos solúveis foram maiores nos tratamentos com biocarvões e menores com adubação mineral. A maior influência na acidificação dos frutos foi com o biocarvão produzido com palha de arroz. nutricional destacase destaca se sustentáveis contexto objetivouse objetivou frango arroz físicoquímicas físico químicas casualizados 1 0, 0 (0 6 ha1 ha ha-1 repetições mineral . mineral) comprimento casca fruto titulável pH cinzas, cinzas , cinzas) ( ha-

ABSTRACT Bell pepper, a crop of nutritional importance, stands out for its vitamin C content. Given the need for sustainable agricultural practices, the present study explored the use of biochars derived from regional waste as an alternative in bell pepper cultivation. In this context, the present study aimed to evaluate the effect of biochars from poultry litter, coconut fiber, and rice straw on the biometric and physicochemical characteristics of bell pepper fruits, on fruit production per plant and on fruit yield. The experiment was performed in the field in a randomized block design, in a 5 × 3 + 1 factorial scheme, referring to five doses of biochar (0, 3, 6, 9, and 12 t ha-1) and three types of biochar (coconut fiber, poultry litter, and rice straw) with four repetitions, plus an additional treatment (mineral fertilization). Biometric variables (fruit length and diameter, skin thickness, number of fruits, fruit mass) and physicochemical variables of the fruits (soluble solids, titratable acidity, pH, vitamin C, and ash content), production and yield of the fruits were evaluated. The production of bell pepper fruits was not influenced by biochars, but the doses of biochars influenced all variables analyzed with the exception of skin thickness. Vitamin C and soluble solids contents were higher in treatments with biochar and lower with mineral fertilizer. Biochar produced from rice straw had the greatest influence on fruit acidification. importance content practices cultivation context litter fiber design scheme 0, 0 (0 6 9 ha1 ha ha-1 repetitions fertilization. fertilization . fertilization) diameter thickness mass acidity pH content, , content) evaluated fertilizer acidification ( ha-

RESUMO A introdução da soja tolerante a 2,4-D (ENLIST®) oferece um novo potencial para a aplicação de herbicidas. Dessa forma, o presente trabalho teve como objetivo: (a) avaliar o efeito das combinações de herbicidas pós-emergentes no controle de Conyza spp., e (b) a seletividade da associação de herbicidas pós-emergentes em soja, garantindo uma aplicação eficaz sem comprometer a saúde da cultura. Um experimento de campo com soja tolerante ao 2,4-D utilizou um delineamento experimental de blocos casualizados, com 14 tratamentos em quatro repetições. Os tratamentos incluíram várias combinações de 2,4-D com glifosato, chlorimuron, cloransulam, imazethapyr, bentazona e imazamox. Estes foram aplicados como um único tratamento ou sequencialmente 15 dias após o tratamento (DAT) usando glufosinato de amônio, juntamente com dois controles sem aplicação de herbicida. Os resultados mostraram menos de 15% de fitotoxicidade em todos os tratamentos. Aos 21 DAT, apenas os tratamentos aplicados sequencialmente mostraram controle significativo, com eficácia superior a 80% contra Conyza spp. Em contraste, as aplicações únicas das combinações de herbicidas com 2,4-D foram ineficazes para o controle pós-emergência de Conyza spp. 2,4D 24D D 2,4 2 4 ENLIST® ENLIST (ENLIST® forma objetivo (a pósemergentes pós emergentes spp b (b cultura casualizados 1 repetições glifosato chlorimuron cloransulam imazethapyr imazamox DAT (DAT amônio herbicida significativo 80 contraste pósemergência emergência 4D 24 2, (ENLIST 8

ABSTRACT The introduction of 2,4-D-tolerant soybeans (ENLIST®) offers a new potential for herbicide application. Therefore, the present study aimed to (a) evaluate the effect of combinations of post-emergent herbicides on the control of Conyza spp. and (b) assess the selectivity of the post-emergent herbicide association in soybeans, ensuring effective application without compromising the health of the crop. A field experiment with 2,4-D-tolerant soybeans utilized a randomized complete block design with 14 treatments across four replications. Treatments included various combinations of 2,4-D with glyphosate, chlorimuron-ethyl, cloransulam-methyl, imazethapyr, bentazon, and imazamox. These were applied either as a single treatment or sequentially 15 days after treatment (DAT) using glufosinate-ammonium alongside two controls without herbicide application. The results showed less than 15% control across all treatments. At 21 DAT, only the treatments applied sequentially showed significant control, with effectiveness exceeding 80% against Conyza spp. In contrast, the single applications of the herbicide combinations with 2,4-D were ineffective for post-emergence control of Conyza spp. 2,4Dtolerant 24Dtolerant Dtolerant 2,4 D tolerant 2 4 ENLIST® ENLIST (ENLIST® Therefore (a postemergent post emergent spp b (b crop 1 replications 2,4D 24D glyphosate chlorimuronethyl, chlorimuronethyl chlorimuron ethyl, ethyl chlorimuron-ethyl cloransulammethyl, cloransulammethyl cloransulam methyl, methyl cloransulam-methyl imazethapyr bentazon imazamox DAT (DAT glufosinateammonium glufosinate ammonium 80 contrast postemergence emergence 4Dtolerant 24 2, (ENLIST 4D 8

RESUMO: O ensino de anatomia vem se modificando ao longo dos anos, introduzindo métodos tecnológicos, principalmente após o período pandêmico. Questiona-se o uso exclusivo da tecnologia em comparação aos métodos tradicionais de dissecação e aulas teóricas presenciais no que diz respeito à aquisição de conhecimento. Este artigo analisou a percepção de conhecimento de alunos de diversos semestres do curso de Medicina Veterinária, comparando alunos que tiveram aulas apenas online com aqueles que tiveram aulas presenciais de Anatomia Descritiva dos Animais Domésticos. Para tanto, questões foram enviadas por meio de formulário, com preenchimento voluntário e anônimo, e posteriormente analisadas estatisticamente. Os resultados indicam que 11,5% dos alunos que cursaram a disciplina remotamente falharam na aplicação dos conhecimentos em outras disciplinas, enquanto nenhum aluno do ensino presencial relatou o mesmo. A maioria dos alunos, tanto dos grupos remotos quanto dos presenciais, lembram-se do assunto, mas revisam o conteúdo com frequência. Em relação ao conhecimento teórico, o grupo online (80,8%) compreendeu melhor à medida que o curso avançava, comparado a 59,6% do grupo presencial. A ligação entre Anatomia e outras disciplinas foi mais destacada pelo grupo presencial (30,8%) em comparação ao online (15,4%). Ambos os grupos concordam que o contacto físico com peças anatômicas é essencial, mas alguns consideram possível ter um primeiro contacto com imagens ou fotografias 3D. Baseado nesse estudo preliminar, conclui-se que as interações iniciais com a área de Anatomia devem incluir técnicas pedagógicas diversificadas com comunicação empática. A utilização de recursos tecnológicos modernos é um aliado do processo de ensino-aprendizagem, e após a abstração dos conteúdos é possível o uso singular da tecnologia na manutenção e atualização do conhecimento anatômico. RESUMO anos pandêmico Questionase Questiona Veterinária Domésticos formulário anônimo estatisticamente 115 11 5 11,5 mesmo lembramse lembram assunto frequência teórico 80,8% 808 80 8 (80,8% avançava 596 59 6 59,6 30,8% 308 30 (30,8% 15,4%. 154 15,4% . 15 4 (15,4%) essencial 3D D preliminar concluise conclui empática ensinoaprendizagem, ensinoaprendizagem aprendizagem, aprendizagem ensino-aprendizagem anatômico 1 11, 80,8 (80,8 59, 30,8 3 (30,8 15,4 (15,4% 80, (80, 30, (30, 15, (15,4 (80 (30 (15, (8 (3 (15 ( (1

ABSTRACT: Anatomy teaching has been changing over the years, introducing technological methods especially after the pandemic period. An ongoing debate revolves around whether exclusive reliance on technology for anatomy classes, as opposed to traditional methods and face-to-face instruction, enhances knowledge acquisition. This study analyzed the knowledge perception of students from various semesters throughout the Veterinary Medicine course, comparing students who only had online classes with those who had face-to-face classes in Gross Anatomy of Domestic Animals. For this purpose, a questionnaire was distributed for voluntary and anonymous completion, and the responses were subsequently analyzed statistically. The results indicated that 11.5% of the students who took Anatomy remotely failed to apply the knowledge in other subjects, while no face-to-face learning student reported the same. Most students, both remote and face-to-face groups, remember the subject but review the content frequently. Regarding theoretical knowledge, the online group (80.8%) understood better as the course progressed, compared to 59.6% of the face-to-face group. The connection between Anatomy and other subjects was more highlighted by the face-to-face group (30.8%) compared to the online group (15.4%). Both groups agree that physical contact with anatomical specimens is essential; however, some believe that initial exposure through 3D images or photographs is feasible. We concluded based on this preliminary study that the initial interactions with the Anatomy field should include diversified pedagogical techniques with empathetic communication. The use of modern technological resources are allies in the teaching-learning process. Furthermore, after abstracting the contents, technology alone can effectively maintain and update anatomical knowledge. ABSTRACT years period facetoface face instruction acquisition Animals purpose completion statistically 115 11 5 11.5 same frequently 80.8% 808 80 8 (80.8% progressed 596 59 6 59.6 30.8% 308 30 (30.8% 15.4%. 154 15.4% . 15 4 (15.4%) essential however D feasible communication teachinglearning process Furthermore contents 1 11. 80.8 (80.8 59. 30.8 3 (30.8 15.4 (15.4% 80. (80. 30. (30. 15. (15.4 (80 (30 (15. (8 (3 (15 ( (1

ABSTRACT The characterisation and evaluation of accessions are important steps in both the management of a germplasm collection and in a plant genetic improvement program. Carrying out characterisation and evaluation, whether morphological or molecular, requires observing the overall features of plants in the field, or collecting leaves for DNA extraction, which is time consuming and costly; whereas DNA extracted directly from the seeds allows access to the genome without the need for planting the seeds, which speeds up the selection of genotypes of interest and information on genetic variability. The aim was to develop a non-destructive method for extracting DNA from cashew seeds. The seeds were mechanically perforated using a mini-grinder, and a sample of the endosperm was removed. Various protocols and commercial kits for DNA extraction were tested, as well as materials to seal the opening made in the seed. It is possible to extract cashew tree DNA from the endosperm, preferably using commercial kits with cementitious adhesive as the sealing material, offering a germination percentage of 60% of the perforated seeds. program molecular field costly variability nondestructive non destructive minigrinder, minigrinder mini grinder, grinder mini-grinder removed tested seed material 60 6

The ability to argue is essential for the education of students, as it is fundamental to the presentation of ideas on a given topic. Several methods have been proposed in studies that support the development of argumentation in different teaching contexts, such as the heuristic diagram. It allows the organization and recording of activities that enable critical reflection through the analysis of the language used to express ideas. In this perspective, the diagrams produced for solving problems in an experimental chemistry subject offered in an undergraduate chemistry course were analyzed. Toulmin’s argument pattern was used as a basis to identify the structure of the arguments produced, and then, the quality of the arguments was evaluated. The results of the analysis showed a principle of progress in the argumentative capacity of undergraduates with the development of activities, verified by the presence of elements in students’ texts that, when present, validate an argument. Thus, the results can contribute to other researches in the field of chemical education by favoring a teaching process that considers the development of initial argumentative ability in the formation of students. students topic contexts diagram perspective analyzed Toulmins Toulmin s then evaluated present Thus

ABSTRACT The cowpea is a legume that is widely grown in the north-east of Brazil, and which has been gaining ground in other regions of the country. The main producer is the state of Ceará, with a large planted-area, albeit low productivity due to a lack of producer technology and adapted cultivars. The aim of this study was to identify and recommend superior genotypes in terms of adaptability and stability under rainfed and irrigated conditions, in addition to genotypes with reduced grain darkening. To this end, six experiments were conducted in different districts of Ceará (Crato, Pentecoste, Crateús, Madalena, Bela Cruz and Limoeiro do Norte) and one laboratory experiment, to evaluate grain darkening. The experimental design of the field trials was of randomised blocks, with 14 genotypes and 4 replications. The analysis of variance showed a significant effect from the genotypes and environments and their interaction, so GGE Biplot analysis was carried out to evaluate adaptability and stability. To evaluate grain darkening, a completely randomised design was used in a simple factorial scheme with six previously selected genotypes and five different storage times (0, 2, 4, 6 and 8 months). There was a significant effect from the genotypes and storage time. Genotype 1 showed the least darkening, and can be recommended for environments to which it is best adapted (Crato and Crateús). Genotype 9 was considered the most stable for grain yield, and can be more broadly recommended for the semi-arid region of the state of Ceará. northeast north east Brazil country plantedarea, plantedarea planted area, area planted-area cultivars conditions darkening end Crato, Crato Pentecoste Crateús Madalena Norte experiment blocks replications interaction 0, 0 (0 2 months. months . months) time Crateús. Crateús) yield semiarid semi arid (

ABSTRACT The physiological quality of soya bean seeds is a determining factor in establishing the crop in the field. The aim of the present study was to evaluate the physiological quality of soya bean seeds produced by plants grown from seeds of different sizes in two crop seasons. The BS 2606 SOYTECH, NS 6700 IPRO, NA 5909 RR, BS IRGA 1642 IPRO and LANÇA 58i60 IPRO cultivars were used, sown in 2019/2020 and 2020/2021. The experimental design was of randomised blocks, with treatments comprising seeds from plants grown from seeds of three sieve sizes (5.5, 6.0 and 6.5 mm for cultivars BS2606, NS 6700 IPRO, NA 5909 RR, LANÇA; and 6.0, 6.5 and 7.0 mm for the BS IRGA 1642 IPRO cultivar). The following tests were conducted: germination, first germination count, shoot and root length, total seedling dry weight, seedling emergence, accelerated ageing and electrical conductivity. The results were subjected to analysis of variance, and the mean values were compared using Tukey’s test at 5% probability. The size classification of the soya bean seeds has no effect on the germination of the seeds that are produced. Higher seed vigour in the NA 5909 RR cultivar, determined by the seedling emergence test, and accelerated ageing in NS 6700 IPRO, were obtained from seeds produced by plants grown from seeds classified as a sieve size of 6.5 mm. For the other cultivars, the size classification of the seeds had no effect on the vigour of the produced seeds. field seasons 260 SOYTECH 670 590 164 i 58i6 used 20192020 2019 2020 2019/202 20202021 2021 2020/2021 blocks 5.5, 55 5 (5.5 60 6 0 6. 65 BS2606 70 7 7. cultivar. cultivar . cultivar) conducted count length weight conductivity variance Tukeys Tukey s probability 26 67 59 16 58i 2019202 201 202 2019/20 2020202 2020/202 5.5 (5. BS260 2 1 201920 20 2019/2 202020 2020/20 5. (5 BS26 20192 2019/ 20202 2020/2 ( BS2 2020/