The recycle and utilization of expired drugs is a challenge for many countries at present. The employment of expired drugs as green corrosion inhibitors is expected to address both drug recycling and corrosion prevention issues, with significant economic and environmental value. Herein, the individually and combination corrosion inhibition performance of expired amoxicillin (AMC) and penicillin V potassium tablets (PVP) for lowcarbon steel in 20% acetic acid solution containing 600 mg L-1 chloride ion are evaluated by electrochemistry and weight loss method. Both the AMC and PVP present the mixed-type corrosion inhibitors mainly affect the cathode process when used individually. The optimum inhibition efficiency is 61.22% (AMC) and 79.21% (PVP), which all appear in 5.0 × 10-3 mol L-1. The AMC and PVP are adsorbed on the steel surface by mixed physisorption and chemisorption, which are consistent with the Langmuir adsorption isotherm. The corrosion inhibition rate drops sharply when AMC and PVP are combined use with a close mole ratio. But a small amount of PVP significantly enhance the corrosion inhibition effect of AMC, the corrosion inhibition rate from 61.22 to 79.72%. The corrosion inhibition rate of AMC and PVP combination inhibitor decreased with the increase of temperature. issues value Herein (AMC (PVP 20 60 L1 L 1 L- method mixedtype type 6122 61 22 7921 79 21 79.21 PVP, , 50 5 0 5. 103 10 3 10- L1. 1. chemisorption isotherm ratio 61.2 7972 72 79.72% temperature 2 6 612 792 7 79.2 61. 797 79.72 79. 79.7

Efavirenz, an antiretroviral drug, is a class 2 according to the biopharmaceutics classification system. Many dissolution enhancement systems have been tried and our group had success using wet milling to decrease particle size and granules were obtained by spray and freeze drying. In this paper we present data related to the upgrade in the process, raising the solids concentration in the suspension from 10 to 50% (m/v) and changing the drying step for a fluid bed granulation. After that, tablets were obtained. Granules and tablets were fully evaluated and a pharmacokinetic study was also performed with the granules. By powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) it was possible to prove that there was no phase transition in the sample after milling and drying. Dissolution efficiency of 4 from 5 granules was higher than 90%, considering 83% for the raw material. Tablets were technically approved but the dissolution was impacted and just 2 out of 11 showed results > 80%. A high enhancement in the bioavailability was also observed, around 172%. So, it is possible to conclude that efavirenz microcrystals with enhanced dissolution and bioavailability can be formulated into tablets and are a viable system to develop a new drug product. Efavirenz process 1 50 m/v mv m v (m/v granulation Xray X ray PXRD (PXRD FTIR (FTIR 90 90% 83 material 80 80% observed 172 172% So product 9 8 17

The use of materials such as organofunctionalized silica for application in solid phase extraction (SPE) allows the preconcentration of several ions, including Pt, and subsequent detection. This work aims to synthesize and characterize an organofunctionalized silica (Sil-TMSDT) with the silylant N’(trimethoxysilyl)propylethylenetriamine and its application as a solid phase in the preconcentration Pt4+ ions in aqueous media, using detection by flame atomization atomic absorption spectroscopy (FAAS). The Fourier-transform infrared spectroscopy (FTIR) spectra and scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy (EDS) confirmed the aminofunctionalization of the silica. For the adsorption process, a preconcentration mini-column with 200 mg of Sil-TMSDT, a solution of 0.485 mg L−1 of K2[PtCl6] at pH 10 and HNO3 0.5 mol L−1 as eluent were used, obtaining an enrichment factor of 15-fold with retention efficiency higher than 99%. The Pt4+ ion determined by FAAS showed a linear response between 0.02 and 0.40 mg L−1; a linear coefficient where R = 0.9981; a 16-fold preconcentration factor; a limit of quantification (LOQ) and limit of detection (LOD) of 0.045 and 0.014 mg L−1, respectively. The proposal system showed analytical applicability to determining Pt4+ ion in an aqueous medium and could be used to detect traces of this potentially toxic metal in biological fluids such as urine and blood. SPE (SPE Pt SilTMSDT Sil TMSDT (Sil-TMSDT Ntrimethoxysilylpropylethylenetriamine N trimethoxysilyl propylethylenetriamine Pt4 media FAAS. . (FAAS) Fouriertransform Fourier transform FTIR (FTIR SEM (SEM energydispersive energy dispersive EDS (EDS process minicolumn mini column 20 SilTMSDT, TMSDT, Sil-TMSDT 0485 0 485 0.48 L1 L 1 L− K2PtCl6 KPtCl K2 PtCl6 K PtCl K2[PtCl6 HNO 05 5 0. 15fold fold 15 99 99% 002 02 0.0 040 40 0.4 0.9981 09981 9981 16fold 16 LOQ (LOQ LOD (LOD 0045 045 0.04 0014 014 0.01 respectively blood (FAAS 2 048 48 K2PtCl K2[PtCl 9 00 04 4 0.998 0998 998 004 001 01 0.99 099 0.9 09

Bisphenol A (BPA), an endocrine disruptor used in different commercial polymers, is a persistent pollutant commonly found in effluents. Conventional wastewater treatment processes have low chemical removal efficiency and are expensive. This work evaluated BPA removal using laccase enzyme produced from white rot fungus Pleurotus ostreatus. For the enzymatic production, residues of acai berry and pineapple were used as laccase inducers. The use of natural inducers led to a high enzyme production (1139 and 1031 U mL−1 to acai and pineapple, respectively). Bisphenol A was removed to a concentration lower than LOD (limit of detection) after 4 h. The degradation mechanism of BPA occurred by oxidation of methyl to hydroxymethyl group in a propane portion, with breakdown of the aromatic ring. The developed technology brought to the scene a new green, viable methodology, using vegetable waste, adding value to these residues and bringing an alternative to the BPA treatment. BPA, , (BPA) polymers effluents expensive ostreatus 1139 (113 103 mL1 mL 1 mL− respectively. respectively . respectively) limit detection h portion ring green methodology waste (BPA 113 (11 10 11 (1 (

This study aims to propose a new method for derivatizing fatty acids (FAs) from human milk (HM), eliminating the lipid extraction step, and simplifying the preparation for gas chromatography with a flame ionization detection (GC-FID) analysis to quantify the FAs. The Design Expert software optimized the reaction times, concentrations, and sample amount. The proposed method (PM) was validated for lyophilized HM and results for the figures of merit for precision in relative standard deviation (RSD) (RSDintra-day 1.34-4.03% and RSDinter day 2.08 5.16%), accuracy (99.87-102.16%), and robustness are within a linear range of 3 to 38% lipids in HM samples. The atmospheric solids analysis probe tandem mass spectrometry (ASAP-MS/MS) technique confirmed the efficiency of PM by expressing the molecular composition of triacylglycerol formed by FAs from the GC-FID technique. The PM requires a small sample size and conducts derivatization directly in the sample matrix, minimizing extraction errors. (FAs HM, , (HM) step GCFID GC FID (GC-FID times concentrations amount (PM RSD (RSD RSDintraday RSDintra 1.344.03% 134403 1.34 4.03% 1 34 4 03 1.34-4.03 208 2 08 2.0 5.16%, 516 5.16% 5 16 5.16%) 99.87102.16%, 998710216 99.87 102.16% 99 87 102 (99.87-102.16%) 38 samples ASAPMS/MS ASAPMSMS ASAP MS/MS MS (ASAP-MS/MS matrix errors (HM 344 1.344.03 13440 134 1.3 403 4.03 0 1.34-4.0 20 2. 51 5.16 87102 99.87102.16% 99871021 9987 99.8 10216 102.16 9 8 10 (99.87-102.16% ASAPMS MSMS 1.344.0 1344 13 1. 40 4.0 1.34-4. 5.1 8710 99.87102.16 9987102 998 99. 1021 102.1 (99.87-102.16 1.344. 4. 1.34-4 5. 871 99.87102.1 998710 102. (99.87-102.1 1.344 1.34- 99.87102. 99871 (99.87-102. 99.87102 (99.87-102 99.8710 (99.87-10 99.871 (99.87-1 (99.87- (99.87 (99.8 (99. (99 (9 (

We report a facile hydrothermal method for the synthesis of niobium pentoxide (Nb2O5) under two different temperatures, 120 °C (Nb2O5-120) and 150 °C (Nb2O5-150). The obtained materials were characterized by structural, optical and morphological techniques. Also, the photocatalytic properties of the Nb2O5 samples were evaluated in two reactions under ultraviolet (UVC) irradiation: degradation of methylene blue (MB) and indigo carmine (IC) dyes; and esterification of free fatty acids (FFA) present in waste cooking oil (WCO). The Nb2O5 was formed at different temperatures of synthesis, and the increase in temperature did not cause significant changes in the structural and optical characteristics, but resulted in an increased surface area of the synthesized materials. Both synthesized materials showed excellent efficiency for dye photodegradation. The sample Nb2O5-150 presented the best performance for the MB photodegradation, with almost 85% of the removal efficiency. In this case, the adsorption of MB molecules on the surface of the material was high due to the favorable electrostatic interaction and also because of its high surface area. For the IC photodegradation, the adsorption was insignificant, and both samples presented approximately 100% of the removal efficiency. These materials were also promising for the reduction of free fat acids in waste oil by photoesterification. NbO Nb O (Nb2O5 12 C Nb2O5120 (Nb2O5-120 15 Nb2O5150. Nb2O5150 . (Nb2O5-150) techniques Also Nb2O UVC (UVC irradiation (MB (IC dyes FFA (FFA WCO. WCO (WCO) characteristics photodegradation Nb2O5-15 85 case insignificant 100 photoesterification (Nb2O 1 Nb2O512 (Nb2O5-12 Nb2O515 (Nb2O5-150 (WCO Nb2O5-1 8 10 Nb2O51 (Nb2O5-1 (Nb2O5-15 Nb2O5- (Nb2O5-

ABSTRACT Moringa oleifera Lam. is an arboreal forest species of great economic potential, adapted to the climatic conditions of the Brazilian semi-arid region, whose multiplication is mainly by seeds. Rapid viability and vigor tests help in the choice of lots. Thus, the objective of this study was to assess the efficiency of the pH of exudate and primary root protrusion tests in the evaluation of viability and vigor, respectively. Two seed lots were initially evaluated for moisture content, germination, first count, germination speed index, seedling length, seedling dry mass and electrical conductivity. For the pH of exudate test, phenolphthalein (1%) and sodium carbonate (2 and 4 g L-1) solutions were prepared, with three soaking periods (1, 3 and 5 h) and three temperatures (25, 30 and 35 °C). Exudate solution in strong to light pink color indicated viable seeds, whereas very light pink color to colorless indicated non-viable seeds. The primary root protrusion test was performed under 25, 30 and 35 °C, evaluating the primary root protrusion of at least 2 mm, every 12 h until 196 h. The experimental design was completely randomized, with four replicates. pH of exudate test with 1 h of soaking at 25 or 30 °C with 2 g L-1 sodium carbonate solution was promising, but further studies are needed before it is indicated as routine use for the species. Primary root protrusion test is efficient and can be conducted at 35 °C with evaluation after 48 h. Lam potential semiarid semi arid region seeds Thus respectively content count index length conductivity 1% (1% ( L1 L prepared 1, (1 (25 °C. C . °C) nonviable non mm 19 randomized replicates L- promising

ABSTRACT Planting is considered one of the most essential steps in coffee growing. Lack of uniformity in planting may compromise future operations. Therefore, verifying planting operations quality is fundamental to optimizing production processes and reducing costs. This study aimed to investigate planting techniques through Statistical Process Control (SPC) and aerial images. Carried out in two areas, managed manually and semi-mechanized in the Bom Jardim Farm (MG - Brazil). Data were collected through Remotely Piloted Aircraft (RPA). Quality control charts and density maps were used to identify variations in distribution and spacing between plants and planting rows. It was found that the planting carried out manually was 4.7% wider than projected due to spacing reduction from 0.5 m to 0.48 m. The semi-mechanized system displayed a deficit of 7% compared to the projected planting system, using 0.55 m between plants. The density map showed the most significant planting alignment variations. Despite displaying lower results than the manual system, the semi-mechanized system improvements are valid for their minimal average variations. Thus, correcting points found outside the limits can increase the efficiency of semi-mechanized planting. growing Therefore costs SPC (SPC images areas semimechanized semi mechanized MG Brazil. Brazil . Brazil) RPA. RPA (RPA) rows 47 4 7 4.7 05 0 5 0. 048 48 0.4 055 55 Thus (RPA 4. 04

Abstract The influence of occupant behaviour in buildings is widely discussed as one of the causes for the gap between energy use estimated via computer simulation and during building operation. Knowing the main drivers for adjustments in building systems is essential to guide the development of mathematical models for such behaviours. The aim of this study is to evaluate the main motivating agents for adjusting windows, luminaires, and air-conditioning in offices. Two offices were monitored using sensors that collected data from the internal environment and user interaction with such systems. Rainfall and external and internal air temperatures were considered influential for the interaction with window systems. The increase in internal and external temperatures had even more influence on interactions with air-conditioners. The main conclusions were: there is influence of the layout of the offices in the sharing and control of windows and efficiency of passive strategies, such as the use of natural and cross ventilation; and there is an influence of the increase in internal temperature compared to external temperature in the predictability of opening windows and turning air-conditioning devices on. operation behaviours luminaires airconditioning conditioning airconditioners. airconditioners conditioners. conditioners air-conditioners strategies ventilation

Resumo Ainfluência do comportamento dos usuários em edificações é amplamente discutida como uma das causas para discrepâncias entre consumos energéticos esperados, durante a fase de projeto, e consumos durante a operação. Conhecer os principais motivadores para ajustes nos sistemas de edificações é imprescindível para aprimorar a modelagem desses comportamentos. O objetivo deste estudo é avaliar os principais agentes motivadores para o ajuste das janelas, luminárias e aparelhos de ar-condicionado em escritórios. Dois escritórios foram monitorados por meio de sensores que coletaram dados de qualidade do ambiente interno e comportamento de usuário. Foram consideradas influentes para a interação com sistemas de janelas a pluviometria e as temperaturas do ar externo e interno. O aumento das temperaturas interna e externa apresentou ainda mais influência na interaçãocom aparelhos de ar-condicionado. Duas foram as principais conclusões: há influência do layout dos escritórios no compartilhamento e controle das janelas e eficiência de estratégias passivas, como o uso de ventilação natural e cruzada; e há influência do aumento da temperatura interna em comparação à externa na previsibilidade de abertura de janelas e acionamento de aparelhos de ar-condicionado. esperados projeto operação comportamentos arcondicionado condicionado usuário arcondicionado. condicionado. conclusões passivas cruzada

Abstract Standardized Work (SW) is an approach originated in the manufacturing industry, which aims to standardize and improve the efficiency of operations cycles, based on the Lean Production Philosophy. SW has the potential to support the implementation of Location-Based Planning and Control (LBPC) as it allows balancing the workload between workers or teams, contributing to the synchronization of processes. The aim of this study is to propose a method for implementing SW as an additional element of LBPC. Design Science Research was the methodological approach adopted in this investigation and an empirical study was carried out in a real estate company, in which the method for implementing SW was conceived and implemented.The following benefits were identified in the study: increase in the degree of process standardization, improvement in process synchronization, increase in the engagement of the work force with process standards, and improvement in terms of time reliability. The main contribution of this research study has been the adaptation of SW in the construction context as an additional element of LBPC. (SW industry cycles Philosophy LocationBased Location Based LBPC (LBPC teams processes company implementedThe implemented standardization standards reliability

Resumo Trabalho Padronizado (TP) é uma abordagem originária da indústria da manufatura que visa a padronizar e melhorar a eficiência dos ciclos de operações com base na Filosofia da Produção Enxuta. O TP tem o potencial de apoiar a implementação do Planejamento e Controle Baseado em Localização (LBPC), pois permite equilibrar a carga de trabalho entre os trabalhadores ou equipes, contribuindo para a sincronização de processos. O objetivo deste estudo foi desenvolver um método para implementação do TP como um elemento adicional do LBPC. Design Science Research foi a abordagem metodológica utilizada, sendo conduzido um estudo empírico em uma empresa atuante no mercado imobiliário, na qual o método para implementação do TP foi concebido e implementado. Os seguintes benefícios foram identificados no estudo: aumento do grau de padronização das operações, melhoria na sincronização entre processos, aumento do engajamento da mão-de-obra com padrões de processo, e melhoria em termos de confiabilidade em relação a prazos. A principal contribuição desta pesquisa para o avanço do conhecimento foi a adaptação da abordagem do TP ao contexto da construção civil como um elemento adicional do LBPC. (TP Enxuta LBPC, LBPC , (LBPC) equipes processos utilizada imobiliário implementado mãodeobra mão obra processo prazos (LBPC

Abstract Sanitary ware waste (RLS) is proposed as an ecologically environmental alternative, replacing fine aggregates and gravel, used in the production of self-compacting concrete (SCC). The environmental efficiency in energy life cycles and carbon dioxide emissions of SCC with different mixtures of RLS, were compared with the self-compacting concrete without RLS (CAA_REF). The Life Cycle Assessment (LCA) showed that the replacement of RLS aggregates in CAA_REF, can generate an absolute reduction of approximately 45.42 MJ/m³ and 2.67 kg of CO2/m³ respectively, which corresponds to reductions of 2.2% and 0.6%. It was also verified that the use of an indicator of eco-efficiency of the environmental behavior in relation to the parameter mechanical resistance to compression, can contribute and be adequate in projects of dosages of SCC. Thus, it was observed that the use of RLS can contribute to environmental sustainability, reducing the inadequate disposal of RLS in the environment and implementing an adequate reuse. (RLS alternative gravel selfcompacting self compacting . (SCC) CAA_REF. CAAREF CAA_REF CAA REF (CAA_REF) LCA (LCA 4542 45 42 45.4 MJm³ MJm MJ m³ m MJ/m 267 2 67 2.6 CO2m³ COm CO2 CO CO2/m respectively 22 2.2 06 0 6 0.6% ecoefficiency eco compression Thus sustainability reuse (SCC (CAA_REF 454 4 45. 26 2. CO2m 0.6 0.

Resumo O resíduo de louça sanitária (RLS) é alvitrado como uma alternativa ecologicamente ambiental, em substituição aos agregados finos e pedriscos, empregados na produção de concretos autoadensáveis (CAA). A eficiência ambiental nos ciclos de vida energético e das emissões de dióxido de carbono de CAA com diferentes misturas de RLS, foram comparadas com o concreto autoadensável sem RLS (CAA_REF). A Análise do Ciclo de Vida (ACV) evidenciou que a substituição de agregados de RLS em CAA_REF, pode gerar uma redução absoluta de aproximadamente 34,70 MJ/m³ e 2,07 kg de CO2/m³, respectivamente, o que corresponde a reduções de 1,5% e 0,5%. Verificou-se ainda que o uso de um indicador de ecoeficiência do comportamento ambiental em relação ao parâmetro resistência mecânica à compressão, pode contribuir e ser adequado em projetos de dosagens de CAA. Assim, observou-se que o uso de RLS, pode colaborar para a sustentabilidade ambiental, reduzindo a disposição inadequada dos RLS no meio ambiente e implementado um reuso adequado. (RLS pedriscos . (CAA) CAA_REF. CAAREF CAA_REF REF (CAA_REF) ACV (ACV 3470 34 70 34,7 MJm³ MJm MJ m³ m MJ/m 207 2 07 2,0 CO2m³ COm CO2 CO CO2/m³ respectivamente 15 1 5 1,5 05 0 0,5% Verificouse Verificou se compressão Assim observouse observou (CAA (CAA_REF 347 3 7 34, 20 2, CO2m CO2/m 1, 0,5 0,

Abstract Columns are important structural elements in a building and can be reinforced to increase their capacity. Reinforcement by bonding Fiber Reinforced Polymers (FRP) is attractive because it is easy to apply and does not modify the section. This material has been used in columns for its confinement effect. However, the confinement of columns in non-circular sections is not as efficient as in circular ones. Non-circular geometries behave differently because part of the concrete is not confined. This research aims to study the behavior of rectangular concrete columns reinforced with carbon fiber mats. The aim is to evaluate the performance of rectangular columns with a section side ratio of 2 and to determine the efficiency of the reinforcement. Two groups of columns were tested, one without reinforcement and the other reinforced with a layer of mat. Numerical models were designed with the Finite Element Method (FEM) using Abaqus. The numerical model made it possible to analyze the distribution of stresses in the pillars. Experimental results of maximum force were compared with analytical predictions. The results obtained indicate the efficiency of the reinforcement by improving ductility and increasing load capacity by 30%. FRP (FRP effect However noncircular non ones Noncircular Non confined mats tested mat FEM (FEM Abaqus pillars predictions 30 30% 3

Resumo Pilares são elementos estruturais de grande importância numa edificação e que durante sua vida útil podem ser submetidos a um processo de reforço para aumento da sua capacidade. O reforço com Polímeros Reforçados com Fibras (PRF) é atraente pela facilidade de aplicação e não modificação da seção. O material vem sendo utilizado em pilares pelo efeito de confinamento. Entretanto, em pilares com seções não circulares, o efeito do confinamento não é eficiente como em circulares. Em geometrias de seções não circulares, parte do concreto não fica devidamente confinado. A pesquisa busca estudar o comportamento do reforço de pilares de concreto retangulares pelo confinamento com manta de fibras de carbono. O objetivo é avaliar o desempenho e a eficiência do reforço em pilares retangulares não armados, com altura de 800 mm e relação entre os lados igual a 2. Foram ensaiados dois grupos de pilares, um sem reforço e outro reforçado. Foram idealizados modelos numéricos com o Método dos Elementos Finitos utilizando-se o Abaqus. O modelo numérico permitiu analisar a distribuição das tensões nos pilares. Os resultados experimentais de força máxima foram comparados com previsões analíticas. Os resultados obtidos indicam eficiência do reforço por meio de melhoria na ductilidade e aumento da capacidade de carga em 30%. PRF (PRF seção Entretanto circulares confinado carbono armados 80 2 reforçado utilizandose utilizando se Abaqus analíticas 30 30% 8 3

Summary: Currently, agricultural activity is constantly threatened by the effects of climate change and radical expression of environmental factors as irregular rainfall distribution responsible for water availability and deficit. These factors generate water stress in productive systems, whose negative effect is reflected on morphological, physiological and biochemical aspects of vegetative growth. The use of biostimulants arises as a strategy to counteract this impact, improving crop efficiency in the use of resources and generating responses, as metabolite production, among other substances that mitigate the effects of oxidative stress. In this context, waxes, hydrogen peroxide (H2O2), salicylic acid (SA) and ALGAENZIMSMR were used on raspberry plants subjected to moderate water stress (-0. 8 MPa) to evaluate the fruit response in aspects of vegetative growth, physiological and biochemical quality. For the establishment, a completely randomized design was used with 5 treatments: Green Cover as 5 mL L-1, H2O2 10-4 M, salicylic acid 0.27 mM, ALGAENZIMSMR 7.5 mL L-1 and the control with 50% recovery of the transpired volume as well as water potential similar to the rest of plants and 4 replicates. The results showed that waxes, SA and algal extract increased the photosynthetic rate; the four treatments increased root length; waxes increased root height; and H2O2 increased root biomass. Compared to the control, higher levels of vitamin C and anthocyanins were produced in fruits - a very important aspect due to the functionality of these compounds in human health. Therefore, the use of these biostimulants are a very useful tool for crop management in environments with water restriction.

Resumen: En la actualidad la actividad agrícola se ve amenazada constantemente por los efectos del cambio climático y la expresión radical de los factores ambientales, como la irregularidad en la distribución pluvial responsable de la disponibilidad del agua y déficit, que genera estrés hídrico en los sistemas productivos, cuyo efecto negativo se refleja en aspectos de crecimiento vegetativo, morfológicos, fisiológicos y bioquímicos. El uso de bioestimulantes surge como estrategia para contrarrestar este impacto, mejorando la eficiencia de los cultivos en el uso de los recursos y generar respuestas, como la producción de metabolitos entre otras sustancias, que mitigan los efectos del estrés oxidativo. Bajo este contexto se planteó el uso de ceras, peróxido de hidrogeno (H2O2), ácido salicílico (AS) y algaenzims, sobre plantas de frambuesa sometidas a estrés hídrico moderado (-0.8 MPa) con el objetivo de evaluar la respuesta en aspectos de crecimiento vegetativo, fisiológicos y calidad bioquímica de frutos, para el establecimiento se empleó un diseño completamente al azar con 5 tratamientos: greencover as® 5 mL L-1, H2O2 10-4 M, ácido salicílico 0.27 mM, algaenzims® 7.5 mL L-1 y el control con recuperación del 50% del volumen transpirado y con potencial hídrico similar al resto de plantas y 4 repeticiones. Como resultados se obtuvo que las ceras, AS y el extracto de algas incrementaron la tasa fotosintética, los cuatro tratamientos aumentaron la longitud de raíces, las ceras la altura, y el H2O2 la biomasa de raíz. Por otro lado, en comparación con el control, se produjeron mayores niveles de vitamina C y antocianinas en frutos, un aspecto muy importante por la funcionalidad de estos compuestos en la salud humana. Por lo tanto, el uso de estos bioestimulantes se puede visualizar como una herramienta de gran utilidad para el manejo de cultivos en ambientes con restricción de agua.

RESUMEN El artículo examina la necesidad de introducir la presupuestación por programas, como parte de un proceso más amplio de modernización de las finanzas públicas en Cuba. Dentro de los factores que hacen necesaria su implementación están los nichos de eficiencia del gasto público y la desconexión entre el sistema presupuestario y el sistema de planificación. Esta metodología presupuestaria se orienta a la gestión basada en resultados, permitiendo analizar la productividad del gasto público durante el ejercicio fiscal. Asimismo, su introducción serviría al propósito de calzar financieramente la arquitectura establecida a través de macroprogramas, programas y proyectos, fortaleciendo la correspondecia entre planificación y presupuestación. Se concluye que el éxito en su implementación está condicionado por la existencia de problemas en el entorno macroeconómico, institucional y regulatorio.

ABSTRACT The article examines the need to introduce budgeting by programs, as part of a broader process of modernization of public finances in Cuba. Among the factors that make its implementation necessary are the niches of efficiency in public spending and the disconnection between the budget system and the planning system. This budgetary methodology is oriented towards results based management, making it possible to analyze the productivity of public spending during the fiscal year. Likewise, its introduction would serve the purpose of financially fitting the architecture established through Macroprograms, programs and projects, strengthening the correspondence between planning and budgeting. It is concluded that the success in its implementation is conditioned by the existence of problems in the macroeconomic, institutional and regulatory environment.

Abstract Introduction. In organic agriculture, green manures and biocontrols are used as methods for fertilization and pest control. However, their independent application of these inputs increases production costs. A pelletized formulation is proposed to allow simultaneous application of both inputs. Objective. To evaluate the effect of pelletized Mucuna pruriens (L.) DC. inoculated with Trichoderma harzianum Rifai on nutritional intake, agricultural yield, and regulation of Fusarium oxysporum f. sp. lycopersici in tomato (Solanum lycopersicum L.). Materials and methods. The experiment was carried out in 2022 in Tablón del Guarco, Cartago, Costa Rica, using a randomized complete block design with seven treatments and seven repetitions. Two formulations (A and B) of biopellet (M. pruriens + zeolite + T. harzianum) were applied at three dosages (15, 30, 50 g/plant). T. harzianum was added at a rate of 5 g/kg of biopellet. Applications of each treatment were conducted every 15 days for a total of eight applications. At the time of planting, F. oxysporum was inoculated (100 mL/plant with a concentration of 1 x 103 CFU). Results. The application of biopellet achieved a yield and weight of high-quality fruits similar to the commercial control. There were no significant differences among treatments for second and third-quality fruits. The technical efficiency in controlling F. oxysporum reached 97.6 % with biopellet. This amendment increased the levels of Carbon (C), Nitrogen (N), and organic matter in the soil and affected the nutritional content of the plant foliage in the first 60 days after sowing. Conclusions. The biopellet has the capacity to make chemical and organic contributions to the soil, which improves the nutrition of the tomato crop. It could be also a biocontrol alternative against F. oxysporum and compatible with T. harzianum.

Resumen Introducción. En agricultura orgánica, se utilizan abonos verdes y biocontroladores como métodos de fertilización y control de plagas. Sin embargo, la aplicación independiente de estos incrementa los costos de producción. Se propone una presentación peletizada que permita la aplicación conjunta de ambos insumos. Objetivo. Evaluar el efecto de Mucuna pruriens (L.) DC. peletizada e inoculada con Trichoderma harzianum Rifai en el aporte nutricional, el rendimiento agrícola y la regulación de Fusarium oxysporum f. sp. lycopersici en tomate (Solanum lycopersicum L.). Materiales y métodos. El experimento se ejecutó el año 2022 en Tablón del Guarco, Cartago, Costa Rica, bajo un diseño de bloques completos al azar con siete tratamientos y siete repeticiones. Se aplicaron dos formulaciones (A y B) de biopélet (M. pruriens + zeolita + T. harzianum) en tres dosificaciones (15, 30, 50 g/planta). La adición de T. harzianum se efectuó a razón de 5 g por cada kilo del biopélet. Se realizaron aplicaciones cada 15 días por tratamiento para un total de ocho aplicaciones. Se inoculó F. oxysporum (100 mL/planta con una concentración de 1 x 103 UFC) a la siembra. Resultados. La aplicación del biopélet mostró un rendimiento y peso de frutos de primera calidad similar al testigo comercial. En frutos de segunda y tercera calidad, no hubo diferencias significativas entre tratamientos. La eficiencia en el control de F. oxysporum alcanzó el 97,6 % con biopélet. Esta enmienda aumentó los niveles de Carbono, Nitrógeno y materia orgánica en el suelo e influenció el contenido nutricional en el follaje a los 60 días después de la siembra. Conclusiones. El biopélet tiene la capacidad de realizar aportes químicos y orgánicos al suelo, por lo cual mejora la nutrición del cultivo del tomate. Los resultados sugieren además que es una alternativa de biocontrol contra F. oxysporum y compatible con T. harzianum.