The objective of this work was to evaluate the total concentration and bioaccessible fractions of Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Pb, V and Zn in berry fruits and analyze the influence of different cultivars and growing conditions on the obtained results. The variations in bioaccessible concentrations were from 7.7-30, 17-29, 22-50, 1.8-96, 22-33 and 20-51% of the total concentration, for Ba, Cu, Fe, Mn, Pb and Zn, respectively. Copper showed greater bioaccessibility in blackberry and blueberry. For Fe, bioaccessibility was observed in all strawberries and blueberries and in some blackberries. Zinc presented higher bioaccessible fractions in strawberries. For V, only the sample Blackberry 124 showed bioaccessible concentration, (11% of the total concentration). Regarding the different forms of cultivation, the strawberries that received radiation from the red and white lamps presented a higher production of fruit compared to the other systems, however, in relation to the absorption of nutrients, a small variation was observed between the fruits. Ba Ca Cd Cr Cu Fe K Mg Mn results 7.730, 7730 7.7 30, 7 30 7.7-30 1729, 1729 17 29, 29 17-29 2250, 2250 22 50, 50 22-50 1.896, 1896 1.8 96, 1 8 96 1.8-96 2233 33 22-3 2051% 2051 20 51% 51 20-51 respectively blueberry blackberries 12 11% 11 (11 concentration. . concentration) cultivation systems however nutrients 730 7.730 773 77 7. 3 7.7-3 172 2 17-2 225 5 22-5 896 1.896 189 18 1. 9 1.8-9 223 22- 205 20-5 (1 73 7.73 7.7- 17- 89 1.89 1.8- 20- (

Resumen El desarrollo de proyectos mineros en etapas de exploración y prefactibilidad conlleva desafíos relacionados a la heterogeneidad e incertidumbre geológica y de procesamiento debido a la variabilidad en sus atributos primarios y de respuesta. Por lo tanto, el objetivo de esta investigación radica en elaborar el modelo geometalúrgico del índice de trabajo de Bond. Para esto se desarrollaron modelos de regresión lineal en Jupyter Notebook considerando 790 muestras de resistencia a la compresión uniaxial de la roca (UCS), litologías, zonas minerales e índice de trabajo de Bond (BWi) en un depósito pórfido cuprífero. Los resultados indican relación directamente proporcional de tipo lineal entre el BWi y UCS, generando modelamientos con desempeños aceptables de R2 entre 0,76 a 0,90. Además, las litologías y zonas mineralizadas en el depósito estudiado son características relevantes relacionadas a la conminución. Finalmente, de acuerdo a la competencia de la roca, esta se clasifica como tipo media a dura, dura y muy dura en las zonas de óxidos, mixtos y sulfuros primarios respectivamente.

Abstract The development of mining projects in the exploration and pre-feasibility stages involves challenges related to geological and processing heterogeneity and uncertainty due to variability in their primary and response attributes. Therefore, the objective of this research is to develop the geometallurgical model of the Bond work index. For this purpose, linear regression models were developed in Jupyter Notebook considering 790 samples of uniaxial compressive strength of rock (UCS), lithologies, mineral zones and Bond work index (BWi) in a porphyry copper deposit. The results indicate a directly proportional linear relationship between BWi and UCS, generating modeling with acceptable R2 performances between 0,76 and 0,90. In addition, the lithologies and ore zones in the deposit studied are relevant characteristics related to comminution. Finally, according to rock competence, the rock is classified as medium to hard, hard and very hard in the oxide, mixed and primary sulfide zones, respectively.

Summary: The castor plant (Ricinus communis L.) is a plant that has dif ferent benefits, such as the production of biodiesel and soil bioremediation. Due to the above, the castor plant’s ability to extract arsenic (As) was evaluated. For this, a randomized block experimental design with four repetitions was carried out. The evaluated treatments consisted of two types of biosolids (oxidation lagoon biosolids (BLO) and activated sludge biosolids (BLA) and four doses of As (0, 25, 50, 100 mg kg-1), under greenhouse conditions. As concentration was determined by inductively coupled plasma mass spectrometry (ICP-MS). From the quantification of As, the translocation factor (TF) and the bioaccumulation factor (FB) were estimated. The total nitrogen (N) content was quantified by the combustion method. Phosphorus (P) was analyzed by colorimetry using the metavanadate method, and the content of potassium (K), calcium (Ca), magnesium (Mg), copper (Cu), manganese (Mn), iron (Fe) and zinc (Zn) was quantified by atomic absorption. For percentage of oil The Soxhlet method was used in the seed. The plant height and the dry weight of biomass did not vary due to the treatment ef fect (P ≤ 0.05). The Translocation Factor (TF) and the Bioconcentration Factor (BCF) registered ranges of 0.20 - 0.63 and 0.28 - 0.75, respectively. The applied doses of As did not af fect the biomass and nutrient absorption in the castor plant, which indicates that this plant species is tolerant to toxicity with productive potential in soils contaminated with this element, in concentrations up to 100 mg kg-1.

Resumen: La higuerilla (Ricinus communis L.) es una planta que tiene diferentes beneficios, como la producción de biodiesel y la biorremediación de suelo. Debido a lo anterior, se evaluó la capacidad de la higuerilla para extraer arsénico (As). Para ello, se realizó un diseño experimental de bloques al azar con cuatro repeticiones. Los tratamientos evaluados consistieron en dos tipos de biosólidos (biosólidos de lagunas de oxidación (BLO) y biosólidos de lodos activados (BLA) y cuatro dosis de As (0, 25, 50, 100 mg kg-1), bajo condiciones de invernadero. La concentración de As se determinó por espectrometría de masas por plasma acoplado inductivamente (ICP-MS). A partir de la cuantificación de As se estimó el factor de translocación (FT) y el factor de bioacumulación (FB). El contenido de nitrógeno (N) total se cuantifico por el método de combustión. El fósforo (P) se analizó por colorimetría por el método de metavanadato, y el contenido de potasio (K), calcio (Ca), magnesio (Mg), cobre (Cu), manganeso (Mn), hierro (Fe) y zinc (Zn) que se cuantificaron por absorción atómica. Para porcentaje de aceite en la semilla se utilizó el método Soxhlet. La altura de planta y el peso seco de biomasa no variaron por efecto de tratamiento (P ≤ 0.05). El Factor de translocación (FT) y el Factor de bioconcentración (FBC) registraron rangos de 0.20 - 0.63 y 0.28 - 0.75, respectivamente. Las dosis aplicadas de As no afectaron la biomasa y absorción de nutrientes en la planta de higuerilla, lo cual indica que esta especie vegetal es tolerante a la toxicidad con potencial productivo en suelos contaminados con este elemento, en concentraciones hasta de 100 mg kg-1.

Summary: The municipality of Medellín, Veracruz, México has a type A landfill, whose operation level has recently increased due to landfill closure in the city of Veracruz. The objective of this study is to analyze and evaluate the quality of groundwater surrounding the landfill of the municipality of Medellín., such as hydrogen potential (pH), electrical conductivity (EC), turbidity (T), chemical oxygen demand (COD), total phosphorus (TP), nitrates (NO3 -), total dissolved solids (TDS) and heavy metals Lead (Pb), cadmium (Cd) and copper (Cu) in seven groundwater wells near the landfill during the “north” and dry season. The physicochemical water results from the seven wells analyzed were within the maximum permissible limits of Mexican regulations: turbidity values exceeded international regulations and four wells were found contaminated according to COD levels. The concentrations of Pb and Cd in both seasons were higher than the maximum permissible limits for human consumption in accordance with national and international regulations. Therefore, the results indicated the negative influence of the landfill on groundwater quality.

Resumen: Los rellenos sanitarios se han vuelto una fuente de contaminación de aguas superficiales y subterráneas, debido a la generación de lixiviados que pueden llegar hasta los cuerpos de agua con efectos adversos al ambiente. El municipio de Medellín, Veracruz, México; cuenta con un relleno sanitario tipo A cuyo nivel de operación se ha incrementado recientemente debido a la clausura del relleno sanitario de la ciudad de Veracruz. El objetivo del presente estudio fue analizar la calidad del agua subterránea aledaña al relleno sanitario del municipio de Medellín. Se evaluaron potencial de hidrógeno (pH), conductividad eléctrica (CE), turbidez (T), Demanda Química de Oxigeno (DQO), Fósforo Total (PT), Nitratos, (NO3 -), Sólidos Disueltos Totales (SDT) y metales pesados Plomo (Pb), Cadmio (Cd) y Cobre (Cu) en 7 pozos de agua subterránea próximos al relleno sanitario durante la temporada de “nortes” y estiaje. Los resultados fisicoquímicos del agua de los 7 pozos analizados se encontraron dentro de los límites máximos permisibles de la normatividad mexicana; los valores de turbidez superaron la normatividad internacional y 4 pozos mostraron estar contaminados de acuerdo a los niveles de DQO. Las concentraciones de Pb y Cd en ambas temporadas se encontraron superiores a los límites máximos permisibles para consumo humano de acuerdo con la normatividad nacional e internacional. Los resultados indicaron la influencia negativa del relleno sanitario en la calidad del agua subterránea.

Abstract The two-spotted mite, Tetranychus urticae Koch, is the key pest in rose cut. Preliminary observations show that plants with high density of two-spotted mite exhibit nutritional imbalance, but there is not quantitative information about it. The objective was to determine the relation between two-spotted mite´s density and nutritional status of cut rose crop ‘Polo’. In four samplings, 60 spotted mite-free and 60 plants with over 60 mites per leaf (high infestation) were selected. In both cases, foliar analyses were carried out to determine the micro and macro elements as well as the Nutritional Unbalanced Index (IDN). The plants infested with two-spotted mite showed a nutritional disequilibrium due to reduced foliar concentration of nitrogen, potassium, phosphorus, calcium, manganese and copper. The percentage reduction in the concentration of these elements fluctuated between 0.3 to 29 % compared against control.

Resumen La araña roja, Tetranychus urticae Koch, es la principal plaga del cultivo de rosas para corte (Rosa hybrida). Observaciones preliminares indican que plantas con alta densidad de araña roja presentan deficiencias nutrimentales, pero no existe información cuantitativa al respecto. El objetivo fue determinar la relación que existe entre la densidad de araña roja y el estado nutrimental de rosal ‘Polo’. En cuatro muestreos, se seleccionaron 60 plantas libres de araña roja y 60 plantas con más de 60 ácaros por hoja (infestación alta). En ambos casos se determinó, mediante análisis químico foliar, la cantidad de macro y micronutrimentos, así como el índice de desbalance nutricional (IDN). Las plantas con presencia de araña roja muestran desequilibrio nutrimental debido a la reducción en la concentración foliar de nitrógeno, fósforo, potasio, calcio, manganeso y cobre. El porcentaje de reducción de la concentración de dichos elementos osciló entre 0.3 y 29 % respecto al testigo.

ABSTRACT Soil contamination with toxic metals brings along severe environmental issues. Among these metals, copper (Cu) is harmful to plant development when it reaches high contamination levels in the soil. Thus, identifying species capable of resisting this contamination type helps these sites’ revegetation and decontamination processes. Therefore, the present study aimed to investigate the tolerance of Cedrela fissilis plants to excess Cu through morphophysiological and biochemical variables. C. fissilis seedlings were subjected to five concentrations of Cu (0, 2, 4, 6, and 8 mg L-1). The experimental design was completely randomized, with five treatments and four repetitions. Morphophysiological (number of leaves, shoot height, root length, dry weight, morphological variables of the root system, and leaf area) and biochemical (antioxidant enzymes, lipid peroxidation, hydrogen peroxide concentration, and photosynthetic pigments) traits and Cu accumulated in roots and shoot were evaluated. High concentrations of Cu had a negative effect on the shoot and root dry weight, photosynthetic rate, stomatal conductance, and transpiration rate. Overall, Cu increased the activity of the antioxidant enzymes and lipid peroxidation. Therefore, Cu incidence in the nutrient solution has negatively influenced the biochemical and physiological traits of C. fissilis seedlings to the detriment of their growth. Thus, it was possible to identify sensitive behavior by the investigated species. Because of these features, C. fissilis seedlings can be used as markers for copper-contaminated areas. issues (Cu soil Thus sites processes Therefore C 0, 0 (0 2 4 6 L1. L1 L 1 . L-1) randomized repetitions number leaves height length weight system area peroxidation concentration pigments evaluated rate conductance Overall growth features coppercontaminated contaminated areas ( L-1 L-

RESUMO A contaminação do solo com metais tóxicos traz consigo graves problemas ambientais. Dentre esses metais, o cobre (Cu) é prejudicial ao desenvolvimento das plantas quando atinge elevados níveis de contaminação no solo. Assim, identificar espécies capazes de resistir a esse tipo de contaminação auxilia nos processos de revegetação e descontaminação desses locais. Portanto, o presente estudo teve como objetivo investigar a tolerância de plantas de Cedrela fissilis ao excesso de Cu através de variáveis morfofisiológicas e bioquímicas. Mudas de C. fissilis foram submetidas a cinco concentrações de Cu (0, 2, 4, 6 e 8 mg L-1). O delineamento experimental foi inteiramente casualizado, com cinco tratamentos e quatro repetições. Características morfofisiológicas (número de folhas, altura da parte aérea, comprimento da raiz, massa seca, variáveis morfológicas do sistema radicular e área foliar) e bioquímicas (enzimas antioxidantes, peroxidação lipídica, concentração de peróxido de hidrogênio e pigmentos fotossintéticos) e Cu acumulado nas raízes e folhas foram avaliados. Altas concentrações de Cu tiveram efeito negativo no peso seco da parte aérea e das raízes, na taxa fotossintética, na condutância estomática e na taxa transpiratória. No geral, o Cu aumentou a atividade das enzimas antioxidantes e a peroxidação lipídica. Portanto, a incidência de Cu na solução nutritiva influenciou negativamente as características bioquímicas e fisiológicas das mudas de C. fissilis em detrimento do seu crescimento. Assim, foi possível identificar o comportamento sensível da espécie investigada. Devido a essas características, mudas de C. fissilis podem ser utilizadas como bioindicadoras de áreas contaminadas por cobre. ambientais (Cu Assim locais Portanto C 0, 0 (0 2 4 L1. L1 L 1 . L-1) casualizado repetições número raiz seca foliar lipídica fotossintéticos avaliados fotossintética transpiratória geral crescimento investigada ( L-1 L-

Abstract: This research examines the incorporation of CuO and TiO2 nanoparticles into polypropylene or cotton fabrics to develop reusable personal protective equipment. Different preparation methods are applied to anchor the nanoparticles and avoid leaching. The composition and preparation of fabrics are verified by scanning electron microscopy and X-ray diffraction. Optical properties are assessed by diffuse reflectance spectroscopy and photoluminescence. The results show that for a low ratio of CuO to TiO2, the optical properties improve, reducing bandgap energy and the electron-hole pair recombination rate. Photodegradation of methylene blue increases by 22.8% in polypropylene fabrics and up to 350% in cotton fabrics. In conclusion, photoactivity in polypropylene fabrics is 23.7 times higher than in cotton fabrics, since the preparation method controls the loading of active species.

Resumen: Esta investigación examina la incorporación de nanopartículas de CuO y TiO2 sobre telas de polipropileno o algodón para su implementación como equipo de protección personal reusable. Se utilizan diferentes métodos de preparación para garantizar el anclaje de las nanopartículas y evitar su lixiviación. La composición y preparación de los textiles se verifica por microscopía electrónica de barrido y difracción de rayos X. Las propiedades ópticas se evalúan mediante espectroscopia de reflectancia difusa y fotoluminiscencia. Los resultados muestran que para una baja proporción de CuO a TiO2, se mejoran las propiedades ópticas de los textiles, reduciendo la energía de banda prohibida y la tasa de recombinación del par electrón-hueco. La fotodegradación del azul de metileno aumenta un 22.8% en textiles de polipropileno y hasta 350% en textiles de algodón. En conclusión, la fotoactividad en textiles de polipropileno es 23.7 veces mayor respecto al algodón, ya que con el método de preparación se controla el contenido de las especies activas.

Globally, the demand for mineral products is ever increasing. Extraction of these mineral resources results in the continuous production of a huge volume of waste material, including tailing dumps. The mass of tailings usually exceeds the actual resource and often contains hazardous contaminants. This study investigated the effects of tailings disposal on soil, water, and air quality in the Nampundwe area. Water, soil, and dust samples were collected from different locations in the surrounding communities. The constituents analysed in the samples included copper, cobalt, iron, sulfate, and silica. According to the results obtained, some seepages occurred from the tailings impoundment to the shallow aquifer in the area. However, the general water quality meets the Zambia Environmental Management Agency (ZEMA) statutory limits. Recorded concentrations of sulfate (1500 mg/l), copper (1.5 mg/l), cobalt (1.0 mg/l), iron (2.0 mg/l), and silica were between 0.003 mg/l and 705 mg/l, which is far below ZEMA's statutory limit. Silica concentration was also evident in the air. The highest concentration recorded was 260 ppcc (particle per cubic centimeter) recorded in July 2019 from the northern direction of the tailings dam. The concentration was below the statutory limit of 350 ppcc. The topsoil from the northern part of the tailings recorded a silica dust concentration of 39.9 ppcc. Iron was evident in the underground soil with a concentration of 8.01 ppcc, cobalt 0.005 ppcc, copper 0.051 ppcc, while sulfate was recorded as 0.41 ppcc.

Abstract The present study demonstrated that, when a Cu-Ti electrode pair was polarized in an aqueous SO4 2- electrolyte, Cu was oxidized to a divalent state, under AC. In the solution volume, Cu2+ interacted with OH¯, to produce Cu(OH)2. Depending on the electrolysis conditions, Cu(OH)2 underwent a dehydration reaction, which produced CuO. Under industrial AC, each electrode was alternately polarized, firstly towards the anode, then to the cathode. CuE passivation did not occur. With a change in j on TiE, in the range from 0 to 75 kA/m2, CuE dissolution CE increased, reaching 96.5%. When j on CuE was increased to 1000 A/m2, Cu dissolution CE was above 90%. The most favourable conditions for CuE dissolution were a Na2SO4 Ct from 65 to 75 g/L, experiment duration of 1 h, room T, and I frequency of 50 Hz. The obtained CuO (II) composition was identified by XRD and EDXRF analyses.

Abstract The progress of economic regulation and the environmental impact of large-scale mining copper concessions are analyzed using the expo facto and correlational methodology. It was found that large-scale mining contributes 94 percent of Peru’s annual copper production; copper exports from large-scale mining and mining income are positively correlated (20002019). Given the contamination of water, air, and agricultural land and the violation of the collective rights of mining territories' inhabitants in Peru, it is necessary to implement a comprehensive mining regulation with citizen participation and insertion into sustainable development.

Resumen En esta investigación se analiza el avance de la regulación económica e impacto ambiental de las concesiones cupríferas de la gran minería, para ello se utiliza la metodología expo facto y correlacional. Se encontró que la gran minería aporta 94% de la producción anual de cobre peruano, las exportaciones de cobre de la gran minería y la renta minera están positivamente correlacionadas (2000-2019). Ante la contaminación del agua, aire, tierras agrícolas y vulneración de los derechos colectivos de los pobladores en los territorios mineros en Perú, es necesario implementar una regulación minera integral con participación ciudadana e inserción al desarrollo sustentable.

RESUMEN El trabajo tuvo el propósito de caracterizar, desde el punto de vista químico, físico, granulométrico y mineralógico, un residuo industrial de hidróxido de calcio generado en el proceso de fabricación de acetileno. Las muestras se analizaron, primeramente, sin neutralizar; luego se realizó el mismo procedimiento, usando ácido sulfúrico a un 98 % de pureza. Para ambos casos, las temperaturas de calentamiento fueron de 500 oC y 900 oC. Para identificar las fases, los patrones de difracción fueron obtenidos usando fuente de radiación de cobre (CuKα, λ=1,5418 Å). Se determinó que el residual presenta CaO y MgO, lo que garantiza su pureza. Al calentarlo sin neutralizar a 500 oC se transforma el hidróxido de calcio y a los 900 oC hay pérdida del carbonato y del agua. En el residual, tanto sin tratamiento como neutralizado, está presente el hidróxido de calcio.

ABSTRACT The purpose of the work was to characterize, from the chemical, physical, granulometric and mineralogical point of view, an industrial residue of calcium hydroxide generated in the acetylene manufacturing process. Samples were first analyzed without neutralization; then the same procedure was performed using 98 % purity sulphuric acid. For both cases, the heating temperatures used were 500 °C and 900 °C. To identify the phases, diffraction patterns were obtained using copper radiation source (CuKα, λ = 1.5418 Å). It was determined that residual contains CaO and MgO, which guarantees its purity; heated at 500 °C, and without neutralizing, calcium hydroxide is transformed and there is loss of water and carbonate at 900 °C. In both untreated and neutralized waste, calcium hydroxide is present.

Abstract Based on the excavations of two metallurgical furnaces from the Catarpe Túnel site (San Pedro de Atacama) in operation during the Late Period (A.D. 1400-1536), and oriented to the production of metallic copper, we discuss the role of woody fuel in the development of this technology in the hyper-arid context of the Atacama Desert. Our study focuses on the analysis of anthracological and carpological material, together with the analysis of the depositional characteristics of combustion events and preliminary ethnobotanical information. As a result, we propose the reconstruction of a phase of the operational chain of copper metallurgy, composed of the handling and use of woody fuel, as well as the identification of possible areas of activity developed in the structures. With this, we propose a comprehensive methodological strategy, focusing on aspects such as the recording and recovery of this type of structures with anthracological potential, which is not usually considered within the general archaeological excavation activities, which in turn is applicable to combustion structures in general, contributing to the understanding of the activities surrounding the handling and use of plant fuel.

Resumen A partir de las excavaciones en dos hornos metalúrgicos del sitio Catarpe Túnel (San Pedro de Atacama) en operación durante el Período Tardío (1400-1536 DC), y orientados a la producción de cobre metálico, se discute el rol del combustible leñoso en el desarrollo de esta tecnología en el contexto hiperárido del desierto de Atacama. Nuestro estudio se enfoca en el análisis de material antracológico y carpológico, en conjunto con el análisis de las características depositacionales de los eventos de combustión y la información etnobotánica preliminar. Como resultado, proponemos la reconstrucción de una fase en la cadena operativa de la metalurgia del cobre, compuesta por la gestión y uso del combustible leñoso, además de la identificación de posibles áreas de actividad desarrolladas en las estructuras. Con esto, planteamos una estrategia metodológica integral, enfocada en aspectos como el registro y recuperación de este tipo de estructuras con potencial antracológico, que no suele ser considerada dentro de las actividades generales de excavación arqueológica, la que a su vez es aplicable para estructuras de combustión en general, aportando a la comprensión de las actividades en torno a la gestión y uso del combustible vegetal.

ABSTRACT Introduction: Nowadays the pollutants produced in water exceed the capabilities of its decontamination mechanisms. It is necessary to evaluate the wastewater belonging to the Central Refinería Ecuador (Sugar Refinery Ecuador). Objective: To evaluate the quality of the wastewater from the Central Refinería Ecuador (Sugar Refinery Ecuador) for its possible use in agricultural irrigation. Materials and Methods: The quality of the wastewater was evaluated through physical, chemical and microbiological tests. Results and Discussion: The main physical, chemical and microbiological results evaluated at two points in time were: temperature 46.6 and 43.6 ºC, electrical conductivity 2 359 and 1 366 µS cm-1, sedimentable solids 8 and 3.50 mL L-1. pH 5.8 and 6.3 pH units, total phosphorus 5 and 3.75 mg L-1, total nitrogen 4.20 and 6.45 mg L-1, chemical oxygen demand 1 832 and 1 742 mg L-1, biochemical oxygen demand 1 671 and 1 451 mg L-1, fats and oils 296.90 and 30.90 mg L-1; cadmium 0.06 and 0.16 mg L-1, total chromium 0.10 and 0.20 mg L-1, copper 1.19 and 1.80 mg L-1, lead 0.43 and 0.55 mg L-1, zinc 1.37 and 2.33 mg L-1, total coliforms 8 800 000 and 160 000 mg L-1 and fecal coliforms 8 800 000 and 1 070 000 mg L-1. Conclusions: The effluent does not comply with the discharge requirements of NC 27, (2012) and is classified of poor quality to be used for sugarcane irrigation according to NC 855, (2011).

RESUMEN Introducción: Hoy en día los contaminantes producidos en el agua superan las capacidades de sus mecanismos de descontaminación. Siendo necesario evaluar las aguas residuales pertenecientes al Central Refinería Ecuador. Objetivo: Evaluar la calidad del agua residual del Central Refinería Ecuador, para su posible aprovechamiento en riego agrícola. Materiales y Métodos: La calidad del agua residual se evaluó mediante ensayos físicos, químicos y microbiológicos. Resultados y Discusión: Los principales resultados físico, químicos y microbiológicos evaluados en dos momentos fueron: temperatura 46,6 y 43,6 ºC, conductividad eléctrica 2 359 y 1 366 µS cm-1, sólidos sedimentables 8 y 3,50 mL L-1. pH 5,80 y 6,30 unidades de pH, fósforo total 5 y 3,75 mg L-1, nitrógeno total 4,20 y 6,45 mg L-1, demanda química de oxígeno 1 832 y 1 742 mg L-1, demanda bioquímica de oxígeno 1 671 y 1 451 mg L-1, grasas y aceites 296,9 y 30,9 mg L-1; cadmio 0,06 y 0,16 mg L-1, cromo total 0,10 y 0,20 mg L-1, cobre 1,19 y 1,80 mg L-1, plomo 0,43 y 0,55 mg L-1, zinc 1,37 y 2,33 mg L-1, coliformes totales 8 800 000 y 1 60 000 mg L-1 y coliformes fecales 8 800 000 y 1 070 000 mg L-1. Conclusiones: El efluente no cumple con los requisitos de vertimiento de la NC 27, (2012)y es clasificada de mala calidad para ser aprovechada en el riego de la caña de azúcar según NC 855, (2011).

Geotechnical engineers are routinely tasked with advising suitable stand-off distances below high-risk sections of slopes in open-pit mines that are identified to have potential to deform or collapse. Accurate prediction of failed material runout can mean the difference between continuous safe mining and unwanted high-potential incidents that result in loss of production, equipment damage, injury, or loss of life. This paper updates previous empirical relationships presented by the authors for estimating the volume and runout distance of excavated slope failures, in an open-pit mine operation, using slope geometry as the primary predictor. Cases are sourced from varying slope geometries (fall heights up to 385 m, slope angles up to 80°) and a range of commodities (iron ore, coal, nickel, gold, copper, boron, and limestone), excavated in sedimentary, banded-sedimentary, epithermal, and copper-porphyry deposits, across all six inhabited continents. Analysis of these cases identified positive correlations between slope height and runout distance, and slope height and failed material volume. In general, negative correlations were identified between Fahrböschung angle and slope height, and Fahrböschung angle and failed material volume; however, significant scatter is observed in these datasets. A definitive relationship could not be derived comparing Fahrböschung angle with failed material runout. Slope angle was also found to be a poor indicator of runout. Of the parameters analysed, slope height (i.e., fall height) was found to be the simplest and best predictor of runout distance. This paper presents new charts for predicting failed material runout distance for rock slopes. Relationships are defined for structurally and rock-mass driven slope failure mechanisms at average, 75%, and 95% prediction intervals.

The BCL furnace is scheduled to restart operations after being placed on care and maintenance in 2016 due to depressed nickel prices. The decision to start operations after such a stoppage ought to be led by a techno-economic evaluation of process options to make operations more resilient. For BCL, the decision lies between using the existing flash-smelting furnace (FSF) or a top-submerged lance (TSL) furnace. Available studies show that the FSF combined with other converting technologies is cheaper to operate; however, such studies are based on flowsheet simulation results of single copper concentrates and therefore do not provide a full scope of practical capabilities based on smelter operator skills. Using a t-test on normalized prior operational data from three Cu FSF and two Cu TSL, it was found that the only statistical differences between the operating costs of the FSF and TSL technologies are in the coal use for heating the feed blow and number of rebuilds: the FSF consumes coal to heat the feed blow and the TSL requires 2.4 rebuilds during a course of a single FSF campaign. A summative operating cost comparison over the existing BCL FSF 11-year life shows that BCL can decrease operational costs by some BWP 55.5 million if the operation were to change to the newer TSL technology. The savings derive from reduced coal use, which is normally associated with heating the blow when using the FSF. Despite the TSL carrying added costs of 2.4 rebuilds during a life time of one FSF furnace campaign, the cost associated with the TSL rebuilds of approximately BWP 1.3 million is minimal compared with the overall operational expenditure decrease that BCL will incur on using the TSL technology. In terms of the technology, BCL can have higher Ni-Cu recoveries at lower operational costs by elimination of Ni-Cu losses and eliminating the slag-cleaning furnace by converting to a TSL furnace.