Groundwater is considered an important source of water aid for human consumption. However, this water can be contaminated by impurities, such contamination spots that might reach the water tables. The aim of this study was to investigate the quality of shallow groundwater in Flores neighborhood, located in the municipality of Benevides, within Belém metropolitan region, State of Pará, Brazil. Recommendations described in Standard Methods for Examination of Water and Wastewater were followed at the time to determine physical-chemical parameters such as potential hydrogen (pH), electrical conductivity (EC), total dissolved solids (TDS), apparent color, turbidity, total hardness (TH), ions and trace elements. Multivariate statistical analysis has shown that most predictive water-quality parameters set for human consumption are associated with natural events involving weathering and leaching processes. Nevertheless, parameters of nitrate, phosphate, EC, TDS and pH are also influenced by anthropic conditions in the surroundings, mainly phosphate and nitrate ions. Therefore, it can be concluded that shallow groundwaters in Flores neighborhood are unsuitable for human consumption, making it necessary for municipal public authorities to take action to solve the problem of water shortage in the borough, thus preventing the population from use those shallow groundwaters, as their consumption can bring health problems. However impurities tables Benevides region Pará Brazil physicalchemical physical chemical pH, , (pH) EC (EC) TDS, (TDS) color turbidity TH, TH (TH) elements waterquality processes Nevertheless surroundings Therefore borough problems (pH (EC (TDS (TH

Abstract The objective of this study is to characterize the industrial solid waste generated by a geopolymeric composites precast industry in Goiás and use them in the production of mortar, in partial replacement of cement in the contents of 5%, 10%, 15% and 25%, due to its probable pozzolanic effect. For the research the residue underwent crushing in a hammer mill and sieving in a #40 mesh conducted in the industry itself. Then, physical-chemical analyzes were conducted to verify if the residue meets the parameters established by NBR 12653 (ABNT, 2014) Pozzolanic Materials - Requirements. The residue showed potential to be used as pozzolana, as in the particle size analysis only 19% was retained on sieve #325 and the moisture content also met the parameters of the aforementioned standard. However, the fire loss content and the alkali content available in ���� 2 �� were higher than the standard requirements, because the residue contains tire shavings and sodium hydroxide (NaOH) in its composition. In relation to the performance index with Portland cement at 28 days, the mortar with 5% residue in its composition met the standard conditions, but the performance with lime did not obtain the desired result, as the resistance decreased. After analysis, it has been realized that the residue does not qualify as pozzolan but can be used as a filler. 5 10 10% 15 25 25% effect 40 #4 itself Then physicalchemical physical chemical 1265 ABNT, ABNT (ABNT 2014 Requirements pozzolana 19 325 #32 However ��� � requirements NaOH (NaOH days conditions result decreased filler 1 4 # 126 201 32 #3 12 20 3

Resumo O objetivo deste estudo é caracterizar os resíduos sólidos industriais gerados por uma indústria goiana de pré-moldados de compósitos geopoliméricos e utilizá-los na produção de argamassa, em substituição parcial ao cimento nos teores de 5%, 10%, 15% e 25%, devido ao seu provável efeito pozolânico. Para a pesquisa o resíduo passou por trituração em moinho martelo e peneiramento em malha #40 realizados na própria indústria. Em seguida, foram realizadas análises físico-químicas para verificar se o resíduo atende aos parâmetros estabelecidos pela NBR 12653 (ABNT, 2014b) Materiais Pozolânicos - Requisitos. O resíduo apresentou potencial para ser utilizado como pozolana, pois na análise granulométrica apenas 19% ficaram retidos na peneira #325 e o teor de umidade também atendeu aos parâmetros da referida norma. No entanto o teor de perda ao fogo e o teor de álcalis disponíveis em Na 2 �� foram maiores do que os requisitos da norma, devido ao fato de o resíduo possuir em sua composição, raspas de pneu e hidróxido de sódio (NaOH). Em relação ao índice de desempenho com cimento Portland aos 28 dias, a argamassa que possui em sua composição 5% de resíduo atendeu as condições da norma, mas o desempenho com cal não obteve o resultado desejado, pois a resistência diminuiu. Após análise, percebeu-se que o resíduo não se enquadra como pozolana, mas pode ser usado como enchimento. prémoldados pré moldados utilizálos utilizá los 5 10 10% 15 25 25% pozolânico 40 #4 seguida físicoquímicas físico químicas 1265 ABNT, ABNT (ABNT 2014b b Requisitos pozolana 19 325 #32 norma � NaOH. NaOH . (NaOH) dias desejado diminuiu percebeuse percebeu enchimento 1 4 # 126 32 #3 (NaOH 12 3

Abstract This research allowed us to understand the physical-chemical and microbiological quality of rainwater collected in the downtown area and Medrano neighborhood of the city of Quibdó - Chocó. This population has a high precipitation rate which ranges from 1500mm/year and 8500mm/year, both currently and in the future, although this situation contrasts with the low drinking water coverage, which is only 28.5%. To carry out this study, 5 sampling points were identified, and 4 samples were collected at each point with a periodicity of 1 weekly sampling for 4 weeks, for a total of 20 representative samples. The selected roof tops coverings were made of zinc, asbestos cement, and mantle, and are located in areas of high vehicular and pedestrian activity. The collected samples were analyzed in an accredited laboratory for this purpose. The parameters evaluated for rainwater quality were: apparent color, real color, conductivity, pH, total alkalinity, nitrites, nitrates, total coliforms, and Escherichia Coli. The result of the microbiological analyzes was POSITIVE in 100% of the cases, while 15% of the physical analyses and 34% of the chemical analyses also yielded negative results. Due to the presence mainly of colony-forming units of Escherichia Coli and total coliforms, it was concluded that rainwater in the downtown area and Medrano neighborhood of the city of Quibdó - Chocó, does 5not meet the standards established in the evaluated parameters and required by the regulations, which means that it is not safe for human consumption due to its level of contamination.

Resumen Esta investigación permitió conocer la calidad físico - química y microbiológica del agua lluvia recolectada en la Zona Centro y barrio Medrano de la ciudad de Quibdó - Chocó. Esta población presenta una alta tasa de precipitación la cual oscila entre 1500mm/año y 8500mm/año, tanto en la actualidad como en el futuro, aunque esta situación contraste con la baja cobertura de agua potable que tan solo es del 28,5%. Para realizar dicho estudio se identificaron 5 puntos de muestreo, en cada punto se recolectaron 4 muestras con una periodicidad de 1 muestreo semanal durante 4 semanas, para un total de 20 muestras representativas; las cubiertas seleccionadas fueron de zinc, asbesto cemento y manto; además, están ubicadas en zonas de alta actividad vehicular y peatonal. Las muestras recolectadas fueron analizadas en un laboratorio acreditado para tal fin. Los parámetros evaluados de la calidad del agua lluvia fueron; color aparente, color real, conductividad, pH, alcalinidad total, nitritos, nitratos, Coliformes totales y Escherichia Coli. El resultado de los análisis microbiológicos fue negativo en el 100% de los casos, mientras que el 15% de los análisis físicos y el 34% de los análisis químicos también arrojaron resultados negativos. Debido a la presencia principalmente de unidades formadoras de colonia de Escherichia Coli y Coliformes totales, se concluyó que el agua lluvia en la zona centro y el barrio Medrano de la ciudad de Quibdó - Chocó, no cumple con los estándares establecidos en los parámetros evaluados y requeridos por la norma, lo que significa que no es segura para el consumo humano debido al nivel de contaminación que presenta.

ABSTRACT Introduction: Cuban crude oil has a high content of ash, sulfur, asphaltenes and a high viscosity, among others, which, when subjected to the combustion process, results in corrosive effects in the heat transfer zones, reducing the useful life of the equipment. Objective: To design a procedure for the introduction of additives, which will increase the useful life of the equipment by improving the energy efficiency of the combustion process. Materials and Methods: It starts from the analysis of the composition and physical-chemical properties of Cuban crude oil and the characterization of the additive. The effectiveness of the additive is evaluated on a laboratory, pilot and industrial scale. The combustion parameters are adjusted and the efficiency of the steam generator is analyzed, with the aim of establishing the required dosage. The corresponding profit/economic cost analysis is carried out. Finally, the procedure is designed to compare with another additive if it exists. Results and Discussion: The procedure includes the determination of the chemical composition and physical-chemical properties of the crude oil used, the effect of the additive and the combustion efficiency. It contemplates not only the analysis of the use of an additive in use, but also the introduction of a new one and the comparison with it. It can be implemented in any industry that uses crude oil as fuel in the combustion process. Conclusions: The procedure provides the methodological indications for the introduction of additives that allow the improvement of the steam generator combustion process.

RESUMEN Introducción: El petróleo crudo cubano tiene un alto contenido de cenizas, azufre, asfaltenos y una alta viscosidad, entre otros, que, al someterse al proceso de combustión, trae como consecuencia efectos corrosivos en las zonas de transferencia de calor, disminuyendo la vida útil de los equipos. Objetivo: Diseñar un procedimiento para la introducción de aditivos, que permitan aumentar la vida útil de los equipos a partir de la mejora de la eficiencia energética del proceso de combustión. Materiales y Métodos: Se parte del análisis de la composición y las propiedades físico-químicas del petróleo crudo cubano y la caracterización del aditivo. Se evalúa la efectividad del aditivo a escala de laboratorio, piloto e industrial. Se ajustan los parámetros de la combustión y se analiza la eficiencia del generador de vapor, con el objetivo de establecer la dosificación requerida. Se realiza el análisis beneficio/costo correspondiente. Por último, el procedimiento tiene concebido la comparación con otro aditivo en caso de que exista. Resultados y Discusión: El procedimiento incluye la determinación de la composición química y las propiedades físico-químicas del petróleo crudo utilizado, el efecto del aditivo y la eficiencia de la combustión. Contempla, no solo el análisis de la utilización de un aditivo en uso, si no también, la introducción de uno nuevo y la comparación con éste. Puede ser implementado en cualquier industria que emplee el petróleo crudo como combustible en el proceso de combustión. Conclusiones: El procedimiento brinda las indicaciones metodológicas para la introducción de aditivos que permitan la mejora del proceso de combustión del generador de vapor.

ABSTRACT • Azadirachta indica A. Juss (Neem) is a tree native to India that, due to its multiple properties, is currently widely distributed throughout the world, mainly in tropical and semi-arid areas, being able to withstand adverse conditions such as high temperatures and soils. arid, infertile, stony or acid. Insect repellents and insecticides, fungicides and fertilizers of extraordinary value for integrated or organic agriculture are made from this plant. The objective of this research is the determination of quality parameters of the physical-chemical variables of the oil from the seeds of Azadirachta indica A. Juss (neem). The oil was extracted, by artisanal cold pressing, from the seeds of fruits collected from specimens cultivated in the San Antonio del Sur municipality of the Guantánamo province. The quality parameters were determined: density, acidity index, pH, refractive, iodine and saponification indices. The values of the oil quality parameters of the neem seeds were shown to be similar to the results of other researchers and to be within the ranges required by the Codex. Of all the parameters, the only one that is above the required values is the acidity index. The Neem oil from trees located in Guantánamo could be an alternative to replace imported vegetable oils for industrial use, although with previous refining processes

RESUMEN • Azadirachta indica A. Juss (Neem) es un árbol originario de la India que, por sus múltiples propiedades, se encuentra en la actualidad distribuido ampliamente en el mundo, principalmente en zonas tropicales y semiáridas, pudiendo soportar condiciones adversas tales como: altas temperaturas y suelos áridos, no fértiles, pedregosos o ácidos. A partir de esta planta se elaboran repelentes de insectos e insecticidas, fungicidas y fertilizantes de extraordinario valor para la agricultura integral o biológica. El objetivo de esta investigación es la determinación de parámetros de calidad de las variables físico-químicas del aceite de las semillas de Azadirachta indica A. Juss (Neem). El aceite se extrajo, mediante prensado al frío artesanal, de las semillas de frutos recolectados de especímenes cultivados en el municipio San Antonio del Sur de la provincia de Guantánamo. Se determinaron los parámetros de calidad: densidad, índice de acidez, pH, índices de refracción, de yodo y de saponificación. Los valores de los parámetros de calidad del aceite de las semillas de Neem mostraron ser similares a los resultados de otros investigadores y que se encuentran dentro los rangos exigidos por el Códex. De todos los parámetros el único que está por encima de los valores exigidos es el índice de acidez. El aceite de neem de árboles localizados en Guantánamo podría constituir una alternativa en la sustitución de aceites vegetales importados de uso industrial, aunque con previos procesos de refinación.

Resumo O trabalho de pesquisa foi projetado para investigar a densidade e diversidade de rotíferos pelágicos em um lago perto de Marala Headworks. Foram avaliados os parâmetros físico-químicos da água como pH, oxigênio dissolvido, temperatura, condutividade elétrica, transparência e turbidez. A correlação entre rotíferos e esses parâmetros também foi estudada. A amostragem do plâncton foi realizada mensalmente para verificar a densidade populacional dos rotíferos. No total, foram identificadas 18 espécies de rotíferos pertencentes a 11 gêneros. O maior número de rotíferos e sua diversidade foi demonstrado pelos gêneros Brachionus, Keratella e Filinia. O Brachionus calyciflorus foi a espécie dominante em todas as amostras, com densidade populacional média (41%). A análise de variância dos parâmetros físico-químicos mostrou que a temperatura do ar e da água, condutividade elétrica, transparência, oxigênio dissolvido e saturação de oxigênio foram estatisticamente significantes em todos os meses. Enquanto o pH foi estatisticamente não significativo (p≥0,05), a correlação de Pearson mostrou que o oxigênio e a transparência foram negativamente correlacionados com a densidade e diversidade dos rotíferos. A temperatura do ar e da água, a concentração de íons de hidrogênio (pH), a condutividade elétrica e a salinidade mostraram relação positiva com a densidade e diversidade de rotíferos.

Abstract Research work was designed to investigate the density and diversity of pelagic rotifers in a Lake near Marala Headworks. The physico-chemical parameters of water such as pH, dissolved oxygen, temperature, electrical conductivity, transparency and turbidity were evaluated. Correlation between rotifers and these parameters was also studied. Plankton sampling was done on monthly basis in order to check the population density of rotifers. In total, 18 species of rotifers were identified which belonged to 11 genera. The highest number of rotifers and their diversity was shown by genera namely Brachionus, Keratella, and Filinia. The Brachionus calyciflorus was dominant species in all the samples with mean population density (41%). Analysis of variance of physico-chemical parameters presented that the air and water temperature, electrical conductivity, transparency, dissolved oxygen and oxygen saturation were statistically significant in all the months. While pH was statistically non-significant (p≥0.05. Pearson correlation showed that oxygen and transparency were negatively correlated with rotifers density and diversity. Air and water temperature, concentration of hydrogen ions (pH), electrical conductivity and salinity showed positive relationship with density and diversity of rotifers.

Photosynthetic microorganisms have been widely studied as an alternative technology for CO2 capture. Aiming to overcome some operational challenges in the application of these microorganisms for gas treatment on a large scale, the immobilization of microalgae in solid matrices emerges as an alternative to facilitate effective management of microalgae culture during harvesting process. In this work, different matrices for microalgae immobilization composed of silica/alginate were obtained varying silica precursors. The synthesized materials were characterized in terms of their specific surface area, cell viability, transparency and physical-chemical properties. Additionally, a new methodology was developed to evaluate the CO2 capture by microalgae using a pressurized system with natural gas mixture. Tests were carried out exploring the influence of some variables, such as headspace volume, cell concentration, stirring and pressure. Once the optimized parameters were established, the amount of CO2 captured by immobilized microalgae was investigated for 7 days by determining the CO2 relative concentrations using gas chromatography. The results of immobilized microalgae showed levels of CO2 removal of 41.4%. This work proved the potential application of the studied biomaterial for natural gas processing, making even more feasible the adoption of this technology for selective capture of CO2 on an industrial scale. CO scale process silicaalginate alginate precursors area viability physicalchemical physical chemical properties Additionally mixture variables volume concentration pressure established chromatography 414 41 4 41.4% processing 41.4 41.

The present study investigated the sources of variability in the water quality of surface springs that supply the Metropolitan Region of Belém (Pará, Brazil), as well as the treated water produced by the main water treatment station in the region. Data provided by Companhia de Saneamento do Pará were used, referring to physical-chemical and bacteriological analyzes carried out in the period from 2010 to 2020. In addition, precipitation data were considered in this study, in units of mm of rain, obtained by consulting the database of the National Institute of Meteorology. The application of principal component analysis, as an exploratory data analysis tool, allowed the grouping of the most relevant parameters of the results and proved to be efficient in reducing the data set, explaining more than 65% of the total variance, in all objects of study. Thus, it was possible to observe a general profile of the quality of surface water investigated, and, in this way, demonstrate the impact of urban pressure on the environment, as well as the need for maintenance and conservation of surface water resources. Pará, (Pará Brazil, Brazil , Brazil) region used physicalchemical physical chemical 201 2020 addition rain Meteorology tool set 65 variance Thus way environment resources 20 202 6 2

Nb2O5 is a promising photocatalyst for degradation of organic pollutants and production of H2 (renewable and green fuel) from water is an alternative to overcome environmental and energy concerns. Therefore, the effect of Nb precursor and synthesis method on the Nb2O5 physical-chemical properties and photocatalytic performance were investigated in this work. X-ray diffraction and Raman spectroscopy results showed that synthesis parameters had a significant impact on the structural properties of the materials obtained. The synthesis parameters were able to tune Nb2O5 crystalline phase, morphology and specific surface area. Nb2O5 sample obtained by hydrothermal method resulted in materials with smaller size and homogeneous particles compared to the other samples, which resulted in a higher specific surface area (200 m2 g-1) and surface hydroxylation. Nb2O5 samples were active to promote both the degradation of Rhodamine B and amiloride, the specific surface area and surface hydroxylation play a key role in the performance of the materials. The most active sample for organic pollutant degradation was also active in H2 production, additionally, the decoration with Pt nanoparticles increased its performance. This work describes the effect of synthesis parameters of Nb2O5 on its photocatalytic properties and demonstrates the potential application of this material in heterogeneous photocatalysis. NbO O Nb2O H renewable fuel concerns Therefore physicalchemical physical chemical Xray X ray phase 200 (20 m g1 g 1 g-1 amiloride additionally photocatalysis 20 (2 g- 2 (

Abstract: The aim of this study was to estimate genetic parameters and select superior mango genotypes using the mixed-models approach. The 16 genotypes, varieties and hybrid selections, were evaluated regarding physical and physical-chemical traits of the fruit using the REML/BLUP methodology. Mango fruit weight and pulp weight can be selected indirectly based on fruit length and diameter, which are more easily evaluated. The hybrids CPAC 26394, Lita, and Rosa 46 stand out in regard to fruit size. The genotypes R12P09, CPAC 2293, Roxa, Omega, Alfa, and Lita have better quality fruit than the Tommy Atkins variety that is widely used in commercial orchards. The Roxa variety has pulp with little or no fiber, a trait that is of great importance to consumers and for industrial processing. The genotypes Alfa, CPAC 5895, Ômega, R10P08, R12P09, R13P10, Rosa 2, Rosa 36, and Rosa 46 have pulp free of internal breakdown. The varieties and hybrid selections of mango show variability regarding fruit traits, and the REML/BLUP methodology is efficient for selection of genotypes with desirable fruit traits in mango. Abstract mixedmodels mixed models approach 1 physicalchemical chemical REMLBLUP REML BLUP diameter 26394 4 size R12P09 RP R P 2293 Omega Alfa orchards fiber processing 5895 Ômega R10P08 R13P10 2 36 breakdown 2639 R12P0 229 589 R10P0 R13P1 3 263 R12P 22 58 R10P R13P 26 5

Resumo: Objetivou-se estimar parâmetros genéticos e selecionar genótipos superiores de mangueira, utilizando a abordagem de modelos mistos. Os 16 genótipos, variedades e seleções híbridas, foram avaliados quanto aos caracteres físicos e físico-químicos do fruto, utilizando a metodologia REML/BLUP. A massa do fruto e a massa da polpa de mangueira podem ser selecionadas indiretamente com base no comprimento e no diâmetro do fruto, que são mais facilmente avaliados. Os híbridos CPAC 26394, Lita e Rosa 46 destacam-se quanto ao tamanho do fruto. Os genótipos R12P09, CPAC 2293, Roxa, Omega, Alfa e Lita apresentam frutos de melhorqualidade do que a variedade Tommy Atkins, bastante utilizada em pomares comerciais. Avariedade Roxa apresenta polpa com pouca ou nenhuma fibra, característica muito requisitadapor consumidores e para processamento industrial. Já os genótipos Alfa, CPAC 5895, Ômega, R10P08, R12P09, R13P10, Rosa 2, Rosa 36 e Rosa 46 apresentam polpa livre de colapso interno. Resumo Objetivouse Objetivou se mistos 1 híbridas físicoquímicos físico químicos REMLBLUP REML BLUP REML/BLUP 26394 4 destacamse destacam R12P09 RP R P 2293 Omega Atkins comerciais fibra industrial 5895 Ômega R10P08 R13P10 2 3 interno 2639 R12P0 229 589 R10P0 R13P1 263 R12P 22 58 R10P R13P 26 5

MONITORING OF TRIHALOMETHANES (THMs) AND WATER QUALITY FOR PUBLIC SUPPLY IN THE CITY OF CAVALCANTE, GOIÁS. Trihalomethanes (THMs) are organohalogens compounds formed from the reaction between free residual chlorine and natural matter organic (humic substances) present in raw water from surface sources. This study aimed to evaluate the formation of THMs resulting from the application of chlorine for disinfection, in the water treating process for public supply in the city of Cavalcante, GO, located in the region of Chapada dos Veadeiros (Brazil). The results of physical-chemical analyses apparent color, turbidity, pH, free residual chlorine, consumed oxygen, hardness, total alkalinity and THMs demonstrated a positive and strong correlation between the formation of THMs and the hardness of treated water, as well as the chlorine consumed during disinfection process. It was observed an increase in apparent color, turbidity and consumed oxygen in the rainy season. These parameters indicate the presence of organic matter and that present a positive and moderate correlation with the formation of THMs. (THMs CAVALCANTE GOIÁS humic substances sources Cavalcante GO Brazil. Brazil . (Brazil) physicalchemical physical chemical color pH season (Brazil

Abstract The development potential of byproducts from wastes of grape processing can be a promising alternative due to environmental questions. Moreover, there is the possibility of using this material in the development of products with added value. In this study, the wastes of grape skin (GSk), grape seed (GSe), and defatted grape seed with skin fragments (DGS) from ‘Ives noir’ grape (Vitis labrusca L.), grown under organic farming conditions, had their chemical composition and physical-chemical properties evaluated. Parameters of chemical composition, contents of phenolic compounds, total anthocyanins, flavonoids, and minerals, the antioxidant capacity, and water sorption capacity were evaluated. The wastes of grape were also analyzed by FTIR and TG/DTG. All residues had a high fiber content (54.1 - 74.3 wt.%), the DGS waste had the highest contents of phenolic compounds as flavonoids, and the GSk waste had the highest content of total anthocyanins. Antioxidant capacity values were higher in the ABTS+ method, with no statistical difference. On the other hand, in the DPPH antioxidant assay, the DGS and GSe wastes had higher antioxidant activity; these wastes also had greater thermal stability. The GSk waste had the highest water sorption capacity. The results show that the wastes from grape processing have the potential to be reused in applications with more value added. questions Moreover study GSk, , (GSk) GSe, (GSe) (DGS Ives noir Vitis L., L L. L.) conditions physicalchemical physical evaluated anthocyanins flavonoids minerals TGDTG TG DTG TG/DTG 54.1 541 54 1 (54. 743 74 3 74. wt.%, wt wt.% wt.%) ABTS method difference hand assay activity stability (GSk (GSe 54. 5 (54 7 wt. (5 (

ABSTRACT The use growth regulators from the cytokinins and auxins group has been shown to increase the productivity of certain crops, as they may be involved in the expression of plant sex, although little is known about the action of auxin IBA and cytokinin CPPU on the fruiting of squash, as well as the interaction between both, which makes this field of study promising. Thus, the objective of this study was to induce the fruiting in Atlas squash, by means of different forms of application and proportions of cytokinin and auxin and to evaluate their effects on the physical-chemical characteristics of the fruits. The treatments were composed of six proportions associated with growth regulators and of two forms of application. The experimental design was a randomized block design with four replicates. At 72 days after transplanting, growth and fruit quality analyses were performed. The behavior of the hormones is modulated by their concentration and place of application, and the effect may be beneficial or not. The proportions 50/50% via leaf and 75/25% via ovary were the ones that increased the growth and parameters of fruit quality. The application of CPPU via leaf at higher concentration in proportion decreases quality characteristics such as vitamin C, carotenoids and starch. crops sex squash both promising Thus physicalchemical physical chemical fruits replicates 7 transplanting performed not 5050 50 50/50 7525 75 25 75/25 C starch 505 5 50/5 752 2 75/2 50/ 75/

RESUMO O uso de reguladores de crescimento do grupo das citocininas e auxinas tem demonstrado aumentar a produtividade de algumas culturas, pois podem estar envolvidos na expressão do sexo da planta, embora pouco se saiba sobre a ação da auxina IBA e da citocinina CPPU na frutificação da abóbora, bem como a interação entre ambas, o que torna este campo de estudo promissor. Assim, o objetivo deste estudo foi induzir a frutificação em abóbora Atlas, por meio de diferentes formas de aplicação e proporções de citocinina e auxina e avaliar seus efeitos nas características físico-químicas dos frutos. Os tratamentos foram compostos por seis proporções associadas a reguladores de crescimento e duas formas de aplicação. O delineamento experimental foi em blocos casualizados com quatro repetições. Aos 72 dias após o transplante, foram realizadas análises de crescimento e qualidade dos frutos. O comportamento dos hormônios é modulado por sua concentração e local de aplicação, podendo o efeito ser benéfico ou não. As proporções 50/50% via folha e 75/25% via ovário foram as que aumentaram o crescimento e os parâmetros de qualidade dos frutos. A aplicação de CPPU via foliar em maior concentração em proporção diminui características de qualidade como vitamina C, carotenoides e amido. culturas planta ambas promissor Assim Atlas físicoquímicas físico químicas frutos repetições 7 transplante não 5050 50 50/50 7525 75 25 75/25 C amido 505 5 50/5 752 2 75/2 50/ 75/

ABSTRACT: The captive breeding of the Pantanal caiman (Caiman yacare) offers great potential for the full use of all the component parts of the animal. The meat is an option for human consumption with good sensory acceptance, the skin is valued on the international market and the carcass can be used for obtaining mechanically separated caiman meat (MSCM). This research evaluated the physical chemical parameters of mechanically separated meat obtained from caiman yacare carcass to improve its yield. The proximate composition, lipid oxidation, pH, total volatile bases (TVB) and color during storage under freezing at -18 °C for 90 days were all evaluated. The MSCM presented low lipid content, high protein content and good stability during storage under freezing for 90 days. These results demonstrated that MSCM can be used in the development of caiman meat products. ABSTRACT Caiman animal acceptance MSCM. . (MSCM) yield composition oxidation pH TVB (TVB 18 -1 C 9 products (MSCM 1 -

RESUMO: A criação em cativeiro do jacaré do Pantanal (Caiman yacare) oferece grande potencial para o aproveitamento integral de todas as partes componentes do animal. A carne é uma opção para consumo humano com boa aceitação sensorial, a pele é valorizada no mercado internacional e a carcaça pode ser utilizada para obtenção de carne de jacaré mecanicamente separada (CJMS). O objetivo deste trabalho foi avaliar os parâmetros físico-químicos da carne mecanicamente separada obtida da carcaça do jacaré do Pantanal para melhorar seu rendimento. A oxidação lipídica, pH, bases voláteis totais (TVB) e cor durante o armazenamento sob congelamento a -18 °C, foram avaliados por 90 dias. Além disso, foi avaliada a composição centesimal. A CJMS apresentou baixo teor de lipídios, alto teor de proteína e boa estabilidade durante o armazenamento sob congelamento por 90 dias. Esses resultados demonstram que a CJMS pode ser utilizada no desenvolvimento de produtos cárneos de jacaré. RESUMO Caiman yacare animal sensorial CJMS. . (CJMS) físicoquímicos físico químicos rendimento lipídica pH TVB (TVB 18 -1 C °C 9 dias disso centesimal lipídios (CJMS 1 -

Abstract This research evaluated the physical-chemical and microbiological parameters of water and dialysate in four distinct hemodialysis units located in the southeast region of Brazil. The physical-chemical parameters evaluated were pH, electric conductivity, turbidity, alkalinity, free chlorine, nitrate, fluoride, chloride, sulfate, sodium, potassium, calcium, and magnesium ion concentrations. Microcystin was also quantified. The microbiological parameters evaluated were the detection of total coliform, total heterotrophic bacteria count (THB), and the isolation and identification of microorganisms in pre-reverse osmosis treatment and post-reverse osmosis treatment water samples and dialysate. The nitrate, fluoride and THB levels found in the water samples may present risk to the patient under hemodialysis treatment. Microcystin was detected in one of the potable water samples. Microorganisms were identified throughout the hemodialysis of the entire water treatment system, with Ralstonia sp. being the most frequent. The presence of emergent pathogenic bacteria highlighted in this study highlights the necessity of microbiological monitoring of water destined for hemodialysis. physicalchemical physical chemical Brazil pH conductivity turbidity alkalinity chlorine nitrate chloride sulfate sodium potassium calcium concentrations quantified coliform THB, , (THB) prereverse pre reverse postreverse post system sp frequent (THB

Resumo O objetivo da pesquisa foi a avaliação de parâmetros físico-químicos e microbiológicos da água e dialisato em quatro unidades de hemodiálise localizadas na região sudeste do Brasil. Foram avaliados os parâmetros físico-químicos: pH, condutividade elétrica, turbidez, alcalinidade, cloro livre, concentração dos íons nitrato, fluoreto, cloreto, sulfato, sódio, potássio, cálcio e magnésio, também foi realizada a quantificação de microcistinas. Os parâmetros microbiológicos realizados foram a detecção de coliformes totais, quantificação de bactérias heterotróficas totais (BHT) e o isolamento e identificação de microrganismos em amostras de água pré, pós-tratamento por osmose inversa e dialisato. Os níveis de nitrato, fluoreto e BHT encontrados nas amostras de água podem apresentar risco ao paciente em hemodiálise. Foi identificada em uma amostra de água potável a presença de microcistinas. Microrganismos foram identificados ao longo do sistema de tratamento de água para hemodiálise, sendo a Ralstonia sp. a mais frequente. A presença de bactérias patogênicas emergentes detectadas neste estudo aponta a necessidade do monitoramento microbiológico da água para hemodiálise. físicoquímicos físico químicos Brasil pH elétrica turbidez alcalinidade livre nitrato cloreto sulfato sódio potássio magnésio microcistinas (BHT pré póstratamento pós sp frequente