Abstract The influence of occupant behaviour in buildings is widely discussed as one of the causes for the gap between energy use estimated via computer simulation and during building operation. Knowing the main drivers for adjustments in building systems is essential to guide the development of mathematical models for such behaviours. The aim of this study is to evaluate the main motivating agents for adjusting windows, luminaires, and air-conditioning in offices. Two offices were monitored using sensors that collected data from the internal environment and user interaction with such systems. Rainfall and external and internal air temperatures were considered influential for the interaction with window systems. The increase in internal and external temperatures had even more influence on interactions with air-conditioners. The main conclusions were: there is influence of the layout of the offices in the sharing and control of windows and efficiency of passive strategies, such as the use of natural and cross ventilation; and there is an influence of the increase in internal temperature compared to external temperature in the predictability of opening windows and turning air-conditioning devices on. operation behaviours luminaires airconditioning conditioning airconditioners. airconditioners conditioners. conditioners air-conditioners strategies ventilation

Resumo Ainfluência do comportamento dos usuários em edificações é amplamente discutida como uma das causas para discrepâncias entre consumos energéticos esperados, durante a fase de projeto, e consumos durante a operação. Conhecer os principais motivadores para ajustes nos sistemas de edificações é imprescindível para aprimorar a modelagem desses comportamentos. O objetivo deste estudo é avaliar os principais agentes motivadores para o ajuste das janelas, luminárias e aparelhos de ar-condicionado em escritórios. Dois escritórios foram monitorados por meio de sensores que coletaram dados de qualidade do ambiente interno e comportamento de usuário. Foram consideradas influentes para a interação com sistemas de janelas a pluviometria e as temperaturas do ar externo e interno. O aumento das temperaturas interna e externa apresentou ainda mais influência na interaçãocom aparelhos de ar-condicionado. Duas foram as principais conclusões: há influência do layout dos escritórios no compartilhamento e controle das janelas e eficiência de estratégias passivas, como o uso de ventilação natural e cruzada; e há influência do aumento da temperatura interna em comparação à externa na previsibilidade de abertura de janelas e acionamento de aparelhos de ar-condicionado. esperados projeto operação comportamentos arcondicionado condicionado usuário arcondicionado. condicionado. conclusões passivas cruzada

Abstract Standardized Work (SW) is an approach originated in the manufacturing industry, which aims to standardize and improve the efficiency of operations cycles, based on the Lean Production Philosophy. SW has the potential to support the implementation of Location-Based Planning and Control (LBPC) as it allows balancing the workload between workers or teams, contributing to the synchronization of processes. The aim of this study is to propose a method for implementing SW as an additional element of LBPC. Design Science Research was the methodological approach adopted in this investigation and an empirical study was carried out in a real estate company, in which the method for implementing SW was conceived and implemented.The following benefits were identified in the study: increase in the degree of process standardization, improvement in process synchronization, increase in the engagement of the work force with process standards, and improvement in terms of time reliability. The main contribution of this research study has been the adaptation of SW in the construction context as an additional element of LBPC. (SW industry cycles Philosophy LocationBased Location Based LBPC (LBPC teams processes company implementedThe implemented standardization standards reliability

Resumo Trabalho Padronizado (TP) é uma abordagem originária da indústria da manufatura que visa a padronizar e melhorar a eficiência dos ciclos de operações com base na Filosofia da Produção Enxuta. O TP tem o potencial de apoiar a implementação do Planejamento e Controle Baseado em Localização (LBPC), pois permite equilibrar a carga de trabalho entre os trabalhadores ou equipes, contribuindo para a sincronização de processos. O objetivo deste estudo foi desenvolver um método para implementação do TP como um elemento adicional do LBPC. Design Science Research foi a abordagem metodológica utilizada, sendo conduzido um estudo empírico em uma empresa atuante no mercado imobiliário, na qual o método para implementação do TP foi concebido e implementado. Os seguintes benefícios foram identificados no estudo: aumento do grau de padronização das operações, melhoria na sincronização entre processos, aumento do engajamento da mão-de-obra com padrões de processo, e melhoria em termos de confiabilidade em relação a prazos. A principal contribuição desta pesquisa para o avanço do conhecimento foi a adaptação da abordagem do TP ao contexto da construção civil como um elemento adicional do LBPC. (TP Enxuta LBPC, LBPC , (LBPC) equipes processos utilizada imobiliário implementado mãodeobra mão obra processo prazos (LBPC

Abstract Sanitary ware waste (RLS) is proposed as an ecologically environmental alternative, replacing fine aggregates and gravel, used in the production of self-compacting concrete (SCC). The environmental efficiency in energy life cycles and carbon dioxide emissions of SCC with different mixtures of RLS, were compared with the self-compacting concrete without RLS (CAA_REF). The Life Cycle Assessment (LCA) showed that the replacement of RLS aggregates in CAA_REF, can generate an absolute reduction of approximately 45.42 MJ/m³ and 2.67 kg of CO2/m³ respectively, which corresponds to reductions of 2.2% and 0.6%. It was also verified that the use of an indicator of eco-efficiency of the environmental behavior in relation to the parameter mechanical resistance to compression, can contribute and be adequate in projects of dosages of SCC. Thus, it was observed that the use of RLS can contribute to environmental sustainability, reducing the inadequate disposal of RLS in the environment and implementing an adequate reuse. (RLS alternative gravel selfcompacting self compacting . (SCC) CAA_REF. CAAREF CAA_REF CAA REF (CAA_REF) LCA (LCA 4542 45 42 45.4 MJm³ MJm MJ m³ m MJ/m 267 2 67 2.6 CO2m³ COm CO2 CO CO2/m respectively 22 2.2 06 0 6 0.6% ecoefficiency eco compression Thus sustainability reuse (SCC (CAA_REF 454 4 45. 26 2. CO2m 0.6 0.

Resumo O resíduo de louça sanitária (RLS) é alvitrado como uma alternativa ecologicamente ambiental, em substituição aos agregados finos e pedriscos, empregados na produção de concretos autoadensáveis (CAA). A eficiência ambiental nos ciclos de vida energético e das emissões de dióxido de carbono de CAA com diferentes misturas de RLS, foram comparadas com o concreto autoadensável sem RLS (CAA_REF). A Análise do Ciclo de Vida (ACV) evidenciou que a substituição de agregados de RLS em CAA_REF, pode gerar uma redução absoluta de aproximadamente 34,70 MJ/m³ e 2,07 kg de CO2/m³, respectivamente, o que corresponde a reduções de 1,5% e 0,5%. Verificou-se ainda que o uso de um indicador de ecoeficiência do comportamento ambiental em relação ao parâmetro resistência mecânica à compressão, pode contribuir e ser adequado em projetos de dosagens de CAA. Assim, observou-se que o uso de RLS, pode colaborar para a sustentabilidade ambiental, reduzindo a disposição inadequada dos RLS no meio ambiente e implementado um reuso adequado. (RLS pedriscos . (CAA) CAA_REF. CAAREF CAA_REF REF (CAA_REF) ACV (ACV 3470 34 70 34,7 MJm³ MJm MJ m³ m MJ/m 207 2 07 2,0 CO2m³ COm CO2 CO CO2/m³ respectivamente 15 1 5 1,5 05 0 0,5% Verificouse Verificou se compressão Assim observouse observou (CAA (CAA_REF 347 3 7 34, 20 2, CO2m CO2/m 1, 0,5 0,

Abstract Columns are important structural elements in a building and can be reinforced to increase their capacity. Reinforcement by bonding Fiber Reinforced Polymers (FRP) is attractive because it is easy to apply and does not modify the section. This material has been used in columns for its confinement effect. However, the confinement of columns in non-circular sections is not as efficient as in circular ones. Non-circular geometries behave differently because part of the concrete is not confined. This research aims to study the behavior of rectangular concrete columns reinforced with carbon fiber mats. The aim is to evaluate the performance of rectangular columns with a section side ratio of 2 and to determine the efficiency of the reinforcement. Two groups of columns were tested, one without reinforcement and the other reinforced with a layer of mat. Numerical models were designed with the Finite Element Method (FEM) using Abaqus. The numerical model made it possible to analyze the distribution of stresses in the pillars. Experimental results of maximum force were compared with analytical predictions. The results obtained indicate the efficiency of the reinforcement by improving ductility and increasing load capacity by 30%. FRP (FRP effect However noncircular non ones Noncircular Non confined mats tested mat FEM (FEM Abaqus pillars predictions 30 30% 3

Resumo Pilares são elementos estruturais de grande importância numa edificação e que durante sua vida útil podem ser submetidos a um processo de reforço para aumento da sua capacidade. O reforço com Polímeros Reforçados com Fibras (PRF) é atraente pela facilidade de aplicação e não modificação da seção. O material vem sendo utilizado em pilares pelo efeito de confinamento. Entretanto, em pilares com seções não circulares, o efeito do confinamento não é eficiente como em circulares. Em geometrias de seções não circulares, parte do concreto não fica devidamente confinado. A pesquisa busca estudar o comportamento do reforço de pilares de concreto retangulares pelo confinamento com manta de fibras de carbono. O objetivo é avaliar o desempenho e a eficiência do reforço em pilares retangulares não armados, com altura de 800 mm e relação entre os lados igual a 2. Foram ensaiados dois grupos de pilares, um sem reforço e outro reforçado. Foram idealizados modelos numéricos com o Método dos Elementos Finitos utilizando-se o Abaqus. O modelo numérico permitiu analisar a distribuição das tensões nos pilares. Os resultados experimentais de força máxima foram comparados com previsões analíticas. Os resultados obtidos indicam eficiência do reforço por meio de melhoria na ductilidade e aumento da capacidade de carga em 30%. PRF (PRF seção Entretanto circulares confinado carbono armados 80 2 reforçado utilizandose utilizando se Abaqus analíticas 30 30% 8 3

Summary: Currently, agricultural activity is constantly threatened by the effects of climate change and radical expression of environmental factors as irregular rainfall distribution responsible for water availability and deficit. These factors generate water stress in productive systems, whose negative effect is reflected on morphological, physiological and biochemical aspects of vegetative growth. The use of biostimulants arises as a strategy to counteract this impact, improving crop efficiency in the use of resources and generating responses, as metabolite production, among other substances that mitigate the effects of oxidative stress. In this context, waxes, hydrogen peroxide (H2O2), salicylic acid (SA) and ALGAENZIMSMR were used on raspberry plants subjected to moderate water stress (-0. 8 MPa) to evaluate the fruit response in aspects of vegetative growth, physiological and biochemical quality. For the establishment, a completely randomized design was used with 5 treatments: Green Cover as 5 mL L-1, H2O2 10-4 M, salicylic acid 0.27 mM, ALGAENZIMSMR 7.5 mL L-1 and the control with 50% recovery of the transpired volume as well as water potential similar to the rest of plants and 4 replicates. The results showed that waxes, SA and algal extract increased the photosynthetic rate; the four treatments increased root length; waxes increased root height; and H2O2 increased root biomass. Compared to the control, higher levels of vitamin C and anthocyanins were produced in fruits - a very important aspect due to the functionality of these compounds in human health. Therefore, the use of these biostimulants are a very useful tool for crop management in environments with water restriction.

Resumen: En la actualidad la actividad agrícola se ve amenazada constantemente por los efectos del cambio climático y la expresión radical de los factores ambientales, como la irregularidad en la distribución pluvial responsable de la disponibilidad del agua y déficit, que genera estrés hídrico en los sistemas productivos, cuyo efecto negativo se refleja en aspectos de crecimiento vegetativo, morfológicos, fisiológicos y bioquímicos. El uso de bioestimulantes surge como estrategia para contrarrestar este impacto, mejorando la eficiencia de los cultivos en el uso de los recursos y generar respuestas, como la producción de metabolitos entre otras sustancias, que mitigan los efectos del estrés oxidativo. Bajo este contexto se planteó el uso de ceras, peróxido de hidrogeno (H2O2), ácido salicílico (AS) y algaenzims, sobre plantas de frambuesa sometidas a estrés hídrico moderado (-0.8 MPa) con el objetivo de evaluar la respuesta en aspectos de crecimiento vegetativo, fisiológicos y calidad bioquímica de frutos, para el establecimiento se empleó un diseño completamente al azar con 5 tratamientos: greencover as® 5 mL L-1, H2O2 10-4 M, ácido salicílico 0.27 mM, algaenzims® 7.5 mL L-1 y el control con recuperación del 50% del volumen transpirado y con potencial hídrico similar al resto de plantas y 4 repeticiones. Como resultados se obtuvo que las ceras, AS y el extracto de algas incrementaron la tasa fotosintética, los cuatro tratamientos aumentaron la longitud de raíces, las ceras la altura, y el H2O2 la biomasa de raíz. Por otro lado, en comparación con el control, se produjeron mayores niveles de vitamina C y antocianinas en frutos, un aspecto muy importante por la funcionalidad de estos compuestos en la salud humana. Por lo tanto, el uso de estos bioestimulantes se puede visualizar como una herramienta de gran utilidad para el manejo de cultivos en ambientes con restricción de agua.

RESUMEN El artículo examina la necesidad de introducir la presupuestación por programas, como parte de un proceso más amplio de modernización de las finanzas públicas en Cuba. Dentro de los factores que hacen necesaria su implementación están los nichos de eficiencia del gasto público y la desconexión entre el sistema presupuestario y el sistema de planificación. Esta metodología presupuestaria se orienta a la gestión basada en resultados, permitiendo analizar la productividad del gasto público durante el ejercicio fiscal. Asimismo, su introducción serviría al propósito de calzar financieramente la arquitectura establecida a través de macroprogramas, programas y proyectos, fortaleciendo la correspondecia entre planificación y presupuestación. Se concluye que el éxito en su implementación está condicionado por la existencia de problemas en el entorno macroeconómico, institucional y regulatorio.

ABSTRACT The article examines the need to introduce budgeting by programs, as part of a broader process of modernization of public finances in Cuba. Among the factors that make its implementation necessary are the niches of efficiency in public spending and the disconnection between the budget system and the planning system. This budgetary methodology is oriented towards results based management, making it possible to analyze the productivity of public spending during the fiscal year. Likewise, its introduction would serve the purpose of financially fitting the architecture established through Macroprograms, programs and projects, strengthening the correspondence between planning and budgeting. It is concluded that the success in its implementation is conditioned by the existence of problems in the macroeconomic, institutional and regulatory environment.

Abstract Introduction. In organic agriculture, green manures and biocontrols are used as methods for fertilization and pest control. However, their independent application of these inputs increases production costs. A pelletized formulation is proposed to allow simultaneous application of both inputs. Objective. To evaluate the effect of pelletized Mucuna pruriens (L.) DC. inoculated with Trichoderma harzianum Rifai on nutritional intake, agricultural yield, and regulation of Fusarium oxysporum f. sp. lycopersici in tomato (Solanum lycopersicum L.). Materials and methods. The experiment was carried out in 2022 in Tablón del Guarco, Cartago, Costa Rica, using a randomized complete block design with seven treatments and seven repetitions. Two formulations (A and B) of biopellet (M. pruriens + zeolite + T. harzianum) were applied at three dosages (15, 30, 50 g/plant). T. harzianum was added at a rate of 5 g/kg of biopellet. Applications of each treatment were conducted every 15 days for a total of eight applications. At the time of planting, F. oxysporum was inoculated (100 mL/plant with a concentration of 1 x 103 CFU). Results. The application of biopellet achieved a yield and weight of high-quality fruits similar to the commercial control. There were no significant differences among treatments for second and third-quality fruits. The technical efficiency in controlling F. oxysporum reached 97.6 % with biopellet. This amendment increased the levels of Carbon (C), Nitrogen (N), and organic matter in the soil and affected the nutritional content of the plant foliage in the first 60 days after sowing. Conclusions. The biopellet has the capacity to make chemical and organic contributions to the soil, which improves the nutrition of the tomato crop. It could be also a biocontrol alternative against F. oxysporum and compatible with T. harzianum.

Resumen Introducción. En agricultura orgánica, se utilizan abonos verdes y biocontroladores como métodos de fertilización y control de plagas. Sin embargo, la aplicación independiente de estos incrementa los costos de producción. Se propone una presentación peletizada que permita la aplicación conjunta de ambos insumos. Objetivo. Evaluar el efecto de Mucuna pruriens (L.) DC. peletizada e inoculada con Trichoderma harzianum Rifai en el aporte nutricional, el rendimiento agrícola y la regulación de Fusarium oxysporum f. sp. lycopersici en tomate (Solanum lycopersicum L.). Materiales y métodos. El experimento se ejecutó el año 2022 en Tablón del Guarco, Cartago, Costa Rica, bajo un diseño de bloques completos al azar con siete tratamientos y siete repeticiones. Se aplicaron dos formulaciones (A y B) de biopélet (M. pruriens + zeolita + T. harzianum) en tres dosificaciones (15, 30, 50 g/planta). La adición de T. harzianum se efectuó a razón de 5 g por cada kilo del biopélet. Se realizaron aplicaciones cada 15 días por tratamiento para un total de ocho aplicaciones. Se inoculó F. oxysporum (100 mL/planta con una concentración de 1 x 103 UFC) a la siembra. Resultados. La aplicación del biopélet mostró un rendimiento y peso de frutos de primera calidad similar al testigo comercial. En frutos de segunda y tercera calidad, no hubo diferencias significativas entre tratamientos. La eficiencia en el control de F. oxysporum alcanzó el 97,6 % con biopélet. Esta enmienda aumentó los niveles de Carbono, Nitrógeno y materia orgánica en el suelo e influenció el contenido nutricional en el follaje a los 60 días después de la siembra. Conclusiones. El biopélet tiene la capacidad de realizar aportes químicos y orgánicos al suelo, por lo cual mejora la nutrición del cultivo del tomate. Los resultados sugieren además que es una alternativa de biocontrol contra F. oxysporum y compatible con T. harzianum.

Abstract Introduction. The parameters of physiological response to drought stress are the result of a combination of slow- or fast-acting attributes. Gas exchange variables are classified as fast-acting and their level of occurrence or impact depends on the interaction between factors such as genotype and the duration, intensity, and phenological stage of stress occurrence. Objective. To identify the levels of physiological response exhibited by Solanum phureja under progressive water deficit stress. Materials and methods. The experiment was conducted between 2019 and 2020 under semi-controlled conditions at the Obonuco Research Center of the Corporación Colombiana de Investigación Agropecuaria. Four potato cultivars were planted, with half of the trial was maintained at field capacity and the other half subjected to water deficit stress by withholding irrigation for 15 days, followed by rehydration. Gas exchange variables, chlorophyll content, and photosynthetic efficiency were evaluated every three days. Results. Significant differences were observed, with maximum gas exchange values in control plants showing 16.67 µmol m-2 s-1 photosynthesis rate (A); 0.34 mol m-2 s-1 stomatal conductance (gs); 5.5 mmol m-2 s-1 transpiration (E), and under stress, 1.17 µmol m-2 s-1 (A); 0.013 mol m-2 s-1 (gs); 0.29 mmol m-2 s-1 (E). Chlorophyll content values ranged between 451.7 and 474.69 mg m-2 with and without irrigation, respectively. Conclusions. Stomatic closure was the earliest response to water deficit, and potato plants showed recovery in gas exchange values after rehydration following stress. Finally, three levels of physiological response were identified: mild, moderate, and severe stress, depending on the intensity and duration of stress, which is useful for future studies and the development of irrigation schedules.

Resumen Introducción. Los parámetros de respuesta fisiológica al estrés por sequía son la conjugación de una serie de atributos de acción lenta o rápida. Las variables de intercambio gaseoso son catalogadas como de respuesta rápida, su nivel de aparición o afección dependen de la interacción entre factores como el genotipo y duración, intensidad y etapa fenológica de ocurrencia del estrés. Objetivo. Identificar los niveles de respuesta fisiológica que presenta Solanum phureja bajo el estrés progresivo por déficit hídrico. Materiales y métodos. El experimento se realizó entre 2019 y 2020, bajo condiciones semi-controladas en el Centro de Investigación Obonuco de la Corporación Colombiana de Investigación Agropecuaria. Se sembraron cuatro cultivares de papa, la mitad del ensayo se mantuvo con riego a capacidad de campo y a la otra parte se le suspendió para inducir estrés por déficit hídrico durante 15 días, luego se rehidrataron; se evaluaron variables de intercambio gaseoso, clorofila y eficiencia fotosintética cada tres días. Resultados. Se presentaron diferencias significativas con los valores máximos de intercambio gaseoso en plantas del tratamiento control con 16,67 µmol m-2 s-1 tasa de fotosíntesis (A); 0,34 mol m-2 s-1 conductancia estomática (gs) 5,5 mmol m-2 s-1 transpiración (E) y en estrés 1,17 µmol m-2 s-1 (A); 0,013 mol m-2 s-1 (gs); 0,29 mmol m-2 s-1 (E). En cuanto al contenido de clorofila, se presentaron valores entre 451,7 y 474,69 mg m-2 con riego y sin riego, respectivamente. Conclusiones. El cierre estomático fue la respuesta más temprana al déficit hídrico, además, las plantas de papa presentaron recuperación de los valores de intercambio gaseoso después del suministro de riego posterior al estrés. Finalmente, se identificaron tres niveles de respuesta fisiológica, estrés leve, moderado y severo, según la intensidad y duración del estrés, lo cual es de utilidad para futuros estudios y planteamientos de calendarios de riego.

Abstract: The building envelope plays a crucial role in interior thermal comfort and energy efficiency. Hence, the importance of implementing the energy efficiency chapter of the Ecuadorian Construction Standard (NEC-HS-EE). This chapter establishes minimum requirements for thermal transmittance of envelope elements. However, it is unknown whether these values guarantee a satisfactory perception of indoor thermal comfort. This study aims to determine the thermal comfort perception in residential buildings in Loja city, through defining typologies and characterizing their envelope. Typologies are defined using information from the National Building Survey (ENED), while the envelope is characterized by surveying construction professionals in the locality. Finally, a thermal perception survey is conducted on occupants of the defined typologies. The results show that several construction packages comply with the NEC-HS-EE standard (except for the use of 7 cm thick brick wall, which is a common practice) and provide satisfactory comfort perception to occupants during the day, achieving a comfort perception within 80% acceptability. However, this is not maintained during the night.

Resumen: La envolvente desempeña un papel crucial en el confort térmico interior y eficiencia energética de las edificaciones, por ello la importancia de la implementación del capítulo de eficiencia energética de la Norma Ecuatoriana de la Construcción (NEC-HS-EE). Este capítulo establece requisitos mínimos de transmitancia térmica para elementos de la envolvente. Sin embargo, se desconoce si estos valores garantizan una percepción satisfactoria del confort térmico interior. El presente estudio tiene como objetivo determinar la percepción de confort térmico en edificaciones residenciales en la ciudad de Loja, a través de la definición de la tipologías y caracterización de su envolvente. Para la definición de tipologías se considera la información de la Encuesta Nacional de Edificaciones (ENED), mientras que, para la caracterización de la envolvente se encuesta a profesionales de la construcción en la localidad. Finalmente, se aplica una encuesta de percepción térmica a ocupantes de las tipologías definidas. Los resultados muestran que, varios paquetes constructivos cumplen con la NEC-HS-EE (a excepción del uso de pared de ladrillo de 7 cm de espesor, que representa una práctica común) y brindan una percepción satisfactoria de confort a los ocupantes durante el día, alcanzando una percepción de confort dentro del 80% de aceptabilidad, no obstante, esto no se mantiene durante la noche.

Abstract: This study addresses the application of the Cross-Industry Standard Process for Data Mining (CRISP-DM) methodology in the analysis of dissolved gases in oil of power transformers, being this a critical component in electrical systems. The adoption of this six-phase structured method allowed a comprehensive evaluation of the condition of the transformer units of the Ecuadorian electrical system based on the analysis of investment and expansion data of the sector, as well as the study of 1 099 DGA (Dissolved Gas Analysis) profiles obtained from a population of 153 transformers located in the different regions of continental Ecuador. The findings described in this work have the potential to significantly improve investment and maintenance strategies and policies. In addition, the adoption of automation techniques in the DGA classification process is proposed, using supervised learning models to enhance the reliability and efficiency of the public energy service. The results suggest that this approach not only improves the diagnosis within the maintenance activities, but also provides a solid basis to draw a roadmap towards a predictive asset management, resulting in a substantial improvement of the reliability of the national power system.

Resumen: Este estudio aborda la aplicación de la metodología Cross-Industry Standard Process for Data Mining (CRISP-DM) en el análisis de los gases disueltos en aceite de transformadores de potencia, siendo este un componente crítico en los sistemas eléctricos. La adopción de este método estructurado de seis fases permitió evaluar de forma integral la condición de las unidades de transformación del sistema eléctrico ecuatoriano a partir del análisis de datos de inversión y expansión del sector, así como del estudio de 1 099 perfiles DGA (Dissolved Gas Analysis) obtenidos de una población de 153 transformadores ubicados en las distintas regiones de Ecuador continental. Los hallazgos descritos en este trabajo tienen el potencial de mejorar significativamente las estrategias y políticas de inversión y mantenimiento. Además, se propone la adopción de técnicas de automatización en el proceso de clasificación DGA, utilizando modelos de aprendizaje supervisado para potenciar la confiabilidad y eficiencia del servicio público de energía. Los resultados sugieren que este enfoque no solo mejora el diagnóstico dentro de las actividades de mantenimiento, sino que también proporciona una base sólida para trazar una hoja de ruta hacia una gestión predictiva de los activos, lo que se traduce en una mejora sustancial de la confiabilidad del sistema eléctrico nacional.

Abstract: The Galapagos Islands present distinctive challenges in managing their electrical system due to their remote geographical position. Currently, their energy sources are limited to non-renewable energy and partially dependent on renewable energy sources like wind and solar power. The intermittence of these sources poses a threat to the stability and reliability of power systems. The battery energy storage systems (BESS) are a commonly adopted approach for promoting the stability of frequency and voltage in power systems. However, the effectiveness of these systems in accomplishing this objective is contingent on the type of controller and operation used in the storage system. Electrical energy storage systems implement two primary modes of operation; Grid Following and Grid Forming. This paper focuses on the implementation and evaluation in different scenarios of the network-forming mode of operation of the storage system, with the purpose of contributing to the primary frequency regulation in the MRE of the Galapagos Islands. The results obtained demonstrate significant improvements in the stability of the MRE, and greater efficiency in primary frequency regulation.

Resumen: Las Islas Galápagos, debido a su ubicación geográfica aislada, enfrentan desafíos únicos en la gestión de su Microrred eléctrica (MRE), pues actualmente depende de energías no renovables y en una medida considerable de fuentes de energías renovables, como la energía solar y eólica. Estas fuentes de energía intermitentes, afectan la confiabilidad y estabilidad de la MRE. Una solución destacada en la actualidad es la implementación de los sistemas de almacenamiento de energía con baterías, pues estos sistemas aportan a la estabilidad de frecuencia y voltaje, sin embargo, estos aportes a la estabilidad de frecuencia y voltaje de la MRE están en función del tipo de controlador y operación que se emplee al sistema de almacenamiento. Existen dos modos de operación en sistemas almacenamiento de energía eléctrica; seguidor de red y formador de red. Este trabajo se enfoca en la implementación y evaluación en diferentes escenarios, del modo de operación formador de red del sistema de almacenamiento, con el propósito de aportar a la regulación primaria de frecuencia en la MRE de las Islas Galápagos. Los resultados obtenidos demuestran las mejoras significativas en la estabilidad de la MRE, y una mayor eficiencia en la regulación primaria de frecuencia.

Abstract Since 2010, there has been an approximate annual increase of 1% in CO2 emissions due to buildings. The reduction of energy consumption and consequently the mitigation of Greenhouse Gases are global goals due to the global issue of climate change. A key step in achieving these goals is to improve the energy performance of buildings, thereby reducing energy consumption and emissions generated by the built environment. In this regard, the present research focuses on identifying and estimating strategies to reduce energy consumption in buildings known as Community Police Units (UPCs) located in the city of Guayaquil, which corresponds to a very hot and humid climate zone. The study consists of statistical analysis of the historical energy performance of 43 buildings sharing the same architectural design. Additionally, the selection of a representative building was made for energy use monitoring and energy simulation. The results revealed a potential saving of 16 000 kWh per year by reducing the control temperature of the air conditioning system by 1°C and adjusting the on/off schedule. This is equivalent to 1 150 USD and 5 metric tons of CO2 emissions.

Resumen: Desde el 2010 existe un incremento aproximado del 1% anual respecto a las emisiones de CO2 a causa de los edificios. La disminución del consumo energético y consecuentemente la mitigación de los Gases de Efecto Invernadero son metas a nivel mundial debido a la problemática global del cambio climático. Un paso clave para alcanzar estas metas es mejorar el desempeño energético de las edificaciones y de esta manera reducir la energía consumida y las emisiones generadas por el parque edificado. En este sentido, la presente investigación se centra en identificación y estimación de estrategias para reducir el consumo de energía de los edificios llamados Unidades de Policía Comunitaria (UPC) localizadas en la ciudad de Guayaquil, y que corresponde a una zona climática húmeda muy calurosa. El estudio está compuesto por el análisis estadístico del rendimiento energético histórico de 43 edificios, que comparten el mismo diseño arquitectónico. Además, se realizó la selección de un edificio representativo para el monitoreo del uso de energía y simulación energética. Los resultados evidenciaron un potencial de ahorro de 16 000 kWh al año, al disminuir 1°C la temperatura de control del sistema de climatización y modificando el horario de encendido y apagado. Esto es equivalente a 1 150 USD y 5 toneladas equivalentes de CO2.

Abstract The research analyzes the variables that influence the strengthening of business and tax culture through knowledge management. Methodologically, it is a study with a qualitative and analytical approach. The study highlights the importance of knowledge management as a catalyst for improving organizational culture and tax compliance in companies. Variables such as effective communication allow the organization to improve tax and administrative management through the individual knowledge of each employee. The acquisition of skills and knowledge through training and education strengthens the resilience of individuals to regulatory changes. Technology, used as a management and process optimization tool, reduces error variability while increasing efficiency and performance. Teamwork in the execution of tasks facilitates more efficient planning and optimal allocation of individual responsibilities. Finally, by implementing a risk management approach, it is possible to exercise greater diligence in the early detection of errors and minimize their impact on the ongoing business development context.

Resumen La investigación analiza las variables que influyen en el fortalecimiento de la cultura empresarial y tributaria a través de la gestión del conocimiento. A nivel metodológico es un estudio con enfoque cualitativo y analítico. El estudio destaca la importancia de la gestión del conocimiento como un catalizador para mejorar la cultura organizacional y el cumplimiento tributario en las empresas. Variables como la comunicación efectiva, permite en la organización el mejoramiento en la gestión tributaria y administrativa por medio del conocimiento individual de cada trabajador; la adquisición de habilidades y conocimientos a través de la formación y capacitación fortalece la resiliencia de los individuos ante las modificaciones regulatorias; la tecnología, utilizada como un instrumento para la gestión y optimización de los procesos, reduce la variabilidad de errores, al tiempo que aumenta la eficiencia y el rendimiento; el trabajo en equipo en la ejecución de tareas facilita una planificación más eficiente y una asignación óptima de las responsabilidades individuales; y finalmente, mediante la implementación de un enfoque de gestión de riesgos, es posible ejercer una mayor diligencia en la detección temprana de fallos y en la minimización de su impacto en el contexto del desarrollo del negocio en marcha.

Resumen El objetivo de este trabajo fue identificar áreas de oportunidad en la gestión de compras, sus operaciones y funciones en pequeñas y medianas empresas del sector metalmecánico de la ciudad de Gómez Palacio, Durango, México. Se planteó la hipótesis de que existen prácticas en el área de compras que se gestionan de manera deficiente y que representan áreas de oportunidad para su mejora contribuyendo con ello a mejorar la eficacia y la eficiencia de la cadena de suministro. Para obtener la información necesaria se aplicó un cuestionario diseñado en Google forms a una muestra no probabilística de 13 empresas del ramo metalmecánico de la ciudad de Gómez Palacio, Durango., México. El análisis estadístico se realizó con la prueba no paramétrica para muestras pequeñas Kruskal-Wallis y el estadístico Chi cuadrado. La prueba de maduréz de las prácticas se realizó con el uso del modelo SCOR (Supply Chain Operations Reference Model. Los resultados, obtenidos a través de la identificación de debilidades en el proceso, permitieron encontrar áreas de oportunidad en algunas prácticas de compras, asi como también áreas de oportunidad específicas para las 13 empresas estudiadas.

Abstract The objective of this work was to identify areas of opportunity in purchasing management, its operations, and functions in small and medium-sized companies in the metal-mechanic sector in the city of Gómez Palacio, Durango, Mexico. The hypothesis was raised that there are practices in the purchasing area that are poorly managed and that represent areas of opportunity for improvement, thereby contributing to improving the effectiveness and efficiency of the supply chain. To obtain the necessary information, a questionnaire designed in Google forms was applied to a non-probabilistic sample of 13 companies in the metal-mechanic industry in the city of Gómez Palacio, Durango, Mexico. Statistical analysis was performed with the Kruskal-Wallis non-parametric test for small samples and the Chi-square statistic. The maturity test of the practices was carried out using the SCOR (Supply Chain Operations Reference Model) model. The results, obtained through the identification of weaknesses in the process, made it possible to find areas of opportunity in some purchasing practices, as well as also specific opportunity areas for the 13 companies studied.

Abstract: The integration of electric mobility is real nowadays. Government policies increasingly focus on encouraging the use of electric vehicles (EVs); particularly, replacing conventional public mobility with electric buses. An adequate energy management of electric bus systems must optimize resource usage, and extend the lifespan of transport units and charging stations, while providing quality service to users. The performance of the EV transport system depends on various deterministic and stochastic variables that need to be accurately simulated to analyze its behavior as closely as possible to real conditions. In this study, a model for the energy analysis of EVs has been implemented, by using the software SUMO (Simulation of Urban Mobility) and applying it to public transport routes in Quito, Ecuador. Through the executed simulations, energy consumption has been estimated and, a sensitivity analysis of the energy consumption of electric bus units to the variations in relevant parameters in the energy management of public transport systems, has been carried out. The impact of certain parameters on energy consumption has been verified, by indicating a significant decrease in the autonomy of EVs on the simulated route under very similar to reality operating conditions. For study case, autonomy reduction of electric bus is around 27% in comparison with manufacturer's specifications. The analysis of energy performance under various traffic scenarios will allow future optimizations of the electric public transport system operation, since traffic levels, variable traffic flow, and pronounced changes in terrain elevation, are considered.

Resumen: La integración de la movilidad eléctrica es una realidad en el mundo actual, las políticas gubernamentales se enfocan cada vez más en incentivar el uso de vehículos eléctricos (VE) particulares, pero, principalmente en reemplazar la movilidad pública convencional por el uso de buses eléctricos. Una adecuada gestión energética de los sistemas de buses eléctricos debe optimizar el uso de recursos, prolongando la vida útil de las unidades de transporte, estaciones de carga y brindando siempre un servicio de calidad a sus usuarios. El desempeño del sistema de transporte mediante VE depende de diversas variables determinísticas y estocásticas que necesitan ser debidamente simuladas a fin de analizar su comportamiento, lo más cercano a las condiciones reales. En el presente trabajo, mediante la aplicación del software SUMO (Simulation of Urban Mobility), se ha implementado un modelo para el análisis energético de VE y se lo ha aplicado en rutas de transporte público en Quito-Ecuador. A partir de las simulaciones realizadas se ha estimado el consumo energético y se ha efectuado un análisis de sensibilidad del consumo energético de las unidades de buses eléctricos ante variaciones de parámetros relevantes en la gestión energética de sistemas de transporte público. Para el caso de estudio se comprueba la reducción de la autonomía del bus eléctrico en 27% de acuerdo con la información del fabricante. El análisis del desempeño energético realizado bajo diversos escenarios de tráfico permitirá en futuros trabajos optimizar la operación de los sistemas de transporte público eléctrico, considerando niveles de tráfico, flujo vehicular variable y pronunciados desniveles en su relieve.