Abstract Objectives The deposition of monosodium urate (MSU) crystals within synovial joints and tissues is the initiating factor for gout arthritis. Thus, MSU crystals are a vital tool for studying gout's molecular mechanism in animal and cellular models. This study mainly compared the excellence and worseness of MSU crystals prepared by different processes and the degree of inflammation induced by MSU crystals. Methods MSU crystals were prepared using neutralization, alkali titration, and acid titration methods. The crystals' shape, length, quality, and uniformity were observed by polarized light microscopy and calculated by the software Image J. The foot pad and air pouch models were used to assess the different degrees of inflammation induced by the MSU crystals prepared by the three different methods at different time points. Paw swelling was evaluated by caliper. In air pouch lavage fluid, inflammatory cell recruitment was measured by hemocytometer, and the level of IL-1β TNF- α, and IL-18 by ELISA. Inflammatory cell infiltration was assayed by immunohistochemistry of air pouch synovial slices. Results For the preparation of MSU crystals with the same uric acid, the quantity acquired by the alkalization method was highest, followed by neutralization, with the acid titration method being the lowest. The crystals prepared by neutralization were the longest. The swelling index of the foot pad induced by MSU crystals prepared by acid titration was significantly lower than that of the other methods at 24 h. The inflammatory cell recruitment and level of 1-1β, TNF-α, and IL-18 in air pouch lavage fluid were lowest in animals with crystals prepared by acid titration. IL-1β secretion induced by MSU crystals prepared by acid titration was significantly lower than that of the other two groups, but there was no significant difference in IL-18 secretion between the three groups in THP-1 macrophages and BMDMs. Conclusions All three methods can successfully prepare MSU crystals, but the levels of inflammation induced by the crystals prepared by the three methods were not identical. The degree of inflammation induced by MSU crystals prepared by neutralization and alkalization is greater than by acid titration, but the quantity of MSU crystals obtained by the alkalization method is higher and less time-consuming. Apparently, the window of inflammation triggered by acid titration preparation is shorter compared to other forms of crystal preparation. Overall, MSU crystals prepared by the alkaline method should be recommended for studying the molecular mechanisms of gout in animal and cellular models.

ABSTRACT Purpose: This study aimed to develop a minimally invasive surgical procedure for laminar lift and posterior cervical laminoplasty via the intermuscular approach using a canine model. Methods: Six Alaskan dogs were used for developing the surgical approach. The bilateral laminae of C3-7 were cut with an ultrasonic osteotome and fixed with bilateral plates to maintain the lamina lifting and reshape a wider spinal canal. The important structures, such as ligaments, supraspinous ligaments, interspinous ligaments, and ligamentum flavum were preserved. The therapeutic effect was evaluated by preoperative and postoperative imaging results and neck mobility. Results: The surgical procedures were all successfully performed in the 6 animals. All the dogs survived well within 1 year of postoperative follow-up. The postoperative neck mobility was as good as the preoperative one. Computed tomography results showed that the anteroposterior diameter of the spinal canal was successfully enlarged and maintained well. Conclusions: The minimally invasive surgical procedure for laminar lift and posterior cervical laminoplasty via the intermuscular approach was feasible in a canine model, which might be applied in clinical practice.

ABSTRACT: Yellowing is a key stage in the curing of flue-cured tobacco (Nicotiana tobacum L.) as much of the chemical transformation occurs during this period. This study examined the effect of different yellowing degrees on the value of flue-cured tobacco leaves at the farm level for both processing and manufacturing. The study was conducted in the counties of Chuxiong, Dali, and Yuxi in Yunnan, China over two years. Yellowing treatments have been designed to have either a mild or a regular yellowing degree. Yield, value, appearance, suction property, smoking characteristics, and physical resistance to further processing were investigated to evaluate the effect of degree of yellowing on the industrial utilization of flue-cured tobacco leaves. The regular yellowing degree enhanced yield, value, and appearance compared to the mild yellowing degree, regardless of cultivar or location; however, physical resistance to further processing and the suction property of the mild yellowing degree treatment were better than with the regular yellowing degree regardless of cultivar or location. Furthermore, although the regular yellowing degree recorded higher smoking characteristic scores than the mild yellowing degree immediately after flue-curing, the scores of mild yellowing degree leaves could be further augmented by increasing intensity in the re-drying stage. The smoking characteristic score in the regular yellowing degree can only be increased by low intensity re-drying, and significantly decreased by mild and high intensity re-drying. Therefore, in terms of industrial utilization, mild yellowing is the better choice for flue-curing tobacco. This study also suggested that the current regular yellowing stage in Yunnan should be shortened to meet the demands of the traditional tobacco industry.

ABSTRACT Tillage systems can influence C sequestration by changing aggregate formation and C distribution within the aggregate. This study was undertaken to explore the impact of no-tillage without straw (NT-S) and with straw (NT+S), and moldboard plow without straw (MP-S) and with straw (MP+S), on soil aggregation and aggregate-associated C after six years of double rice planting in a Hydragric Anthrosol in Guangxi, southwest of China. Soil samples of 0.00-0.05, 0.05-0.20 and 0.20-0.30 m layers were wet-sieved and divided into four aggregate-size classes, >2 mm, 2.00-0.25 mm, 0.25-0.053 and <0.053 mm, respectively, for measuring aggregate associated C and humic and fulvic acids. Results showed that the soil organic carbon (SOC) stock in bulk soil was 40.2-51.1 % higher in the 0.00-0.05 m layer and 11.3-17.0 % lower in the 0.05-0.20 m layer in NT system (NT+S and NT-S) compared to the MP system (MP+S and MP-S), respectively. However, no statistical difference was found across the whole 0.00-0.30 m layer. The NT system increased the proportion of >2 mm aggregate fraction and reduced the proportion of <0.053 mm aggregates in both 0.00-0.05 and 0.05-0.20 m layers. The SOC concentration, SOC stock and humic and fulvic acids within the >0.25 mm macroaggregate fraction also significantly increased in the 0.00-0.5 m layer in NT system. However, those within the 2.00-0.25 mm aggregate fraction were significantly reduced in the 0.05-0.200 m layer under NT system. Straw incorporation increased not only the SOC stock in bulk soil, but also the proportion of macroaggregate, aggregate associated with SOC and humic and fulvic acids concentration within the aggregate. The effect of straw on C sequestration might be dependent on the location of straw incorporation. In conclusion, the NT system increased the total SOC accumulation and humic and fulvic acids within macroaggregates, thus contributing to C sequestration in the 0.00-0.05 m layer.