Classrooms are microenvironments in which children and teenagers may be exposed to fine particulate matter (PM2.5). Iranduba is a rural city in the Amazon region close to many brick kilns and road with high traffic levels. In this study, indoor and outdoor PM2.5 levels were measured in a classroom in Iranduba, and the PM2.5 exposure effects on student’s health were calculated. High indoor PM2.5 concentrations and high indoor-to-outdoor ratio values indicated particle accumulation within the classroom. The high percentage of black carbon (10%) in the dry season revealed the influence of burning processes on PM2.5 composition. Se, S, and Pb had an enrichment factor > 5, indicating that there is an important source for these elements in the city. The positive matrix factorization (PMF) model indicated soil resuspension, burning processes and vehicular emissions as the main PM2.5 sources. The excess risk shows that our classroom occupants are expected to be 30% more likely to develop lung-cancer than a group exposed to a background level of PM2.5. Therefore, it is important to have an effective ventilation system in order to reduce the accumulation of pollutants within the classroom and also to control/decrease the emission of pollutants in the city.

A detailed study of the production of hydrogen and high added-value liquid products from the ethanol dehydrogenation reaction in the presence of sodium hydroxide (10% m m-1) was undertaken. Experiments were carried out in a batch reactor under different reaction conditions (temperature of 240 ºC and autogenous pressure between 45 and 72 bar), with analysis of the products obtained in the gas, liquid and solid fractions. The results showed that hydrogen was the major product formed in the gaseous fraction (maximum of 86.9%), while sodium acetate was the product in the solid fraction. Studies of the reaction mechanisms confirmed formation of the products identified in the gaseous and solid fractions. Mass spectrometry analyses of the liquid fractions revealed the presence of a series of compounds with molecular masses considerably higher than that of ethanol, which could be explained by the favoring of anionic polymerization reactions, under the experimental conditions employed.

This study reports the synthesis and characterization of a Ni/Zn layered double hydroxide salt intercalated with acetate ions and the subsequent replacement of the acetate ions with molybdate ions via an ion exchange reaction, conducted at two different pH values. Regardless of the pH employed during the synthesis, the basal spacing in the Ni/Zn layered double hydroxide salt decreased from 13.08 Å to approximately 9.5 Å, which agreed with intercalation of hydrated molybdate anions. The non-calcined material and the material submitted to heat treatment at 250 °C (basal spacing reduced to 7.35 Å, due to dehydration) were tested as catalyst for the methyl transesterification of soybean oil. Like sodium molybdate in homogeneous media, the solid materials were active catalysts. After reaction at 120 °C for 4 h, the materials afforded high conversions at an alcohol/soybean oil molar ratio of 35:1 and preserved the structure after three consecutive uses. In conclusion, intercalation of molybdate anion into the layered double hydroxide salt proved to be an efficient alternative to support the active species and transform a soluble catalyst into a solid with application in heterogeneous catalysis.

ABSTRACT Removal of sulfur and nitrogen compounds from national commercial diesel through adsorption onto activated carbon was studied. Brazilian commercial activated carbon samples (AC) were modified by acid oxidation and, alternatively, were impregnated with palladium chloride. Modified carbon samples showed a significant increase in the quantity of acid sites, particularly those AC submitted to impregnation with palladium. Adsorption capacity of the carbon samples increased proportionally to the increase in the acid groups. Adsorption efficiency of the activated carbon impregnated with palladium chloride was over 85% for nitrogen compounds and over 60% for sulfur compounds. The treatment studied was found to be an efficient option for the removal of sulfur and nitrogen compounds present in commercial diesel, and thus it could be an alternative pretreatment in the conventional hydrotreatment process.

Materials obtained by the immobilization of 12-tungstophosphoric acid (PTA) on silica using the method of impregnation with excess solution in distinct solvents (aqueous HCl, methanol:H2O, and acetonitrile) were evaluated for use as catalysts in the methyl esterification of stearic acid. Optimum conditions were established for the impregnation of 0.5 g (w/w) of PTA on amorphous silica, under stirring at 150 rpm for 24 h, using 20 mL of 0.1 mol L-1 HCl as the solvent. After calcination at 200 ºC, high conversions were obtained under mild reaction conditions, resulting in high turnover numbers. The catalyst was evaluated in ten catalytic cycles of use, where the activity was reduced only slightly, attesting its stability and the possibility to apply it to industrial production of methylesters.

O gênero Mentha possui 18 espécies e diversos quimiotipos com diferenças inter e intra-específicas. Apesar da grande variabilidade fitoquímica, o maior interesse econômico na produção de óleo essencial de menta deve-se à obtenção do constituinte mentol. Objetivou-se avaliar 19 genótipos de três espécies de Mentha para a produção de mentol. O experimento foi conduzido a campo com delineamento experimental em blocos casualizados, sendo avaliado o desenvolvimento vegetativo, a produtividade e a composição do óleo essencial em duas colheitas sucessivas. As mudas foram obtidas por estaquia a partir de plantas matrizes mantidas em estufa. O plantio foi realizado no mês de setembro e as colheitas em intervalos de 90 dias. Alguns genótipos, mesmo com elevada produção de biomassa, não apresentaram mentol na composição do óleo essencial. Destacou-se o 'Peppermint' (Mentha x piperita), produzindo 34,37 mL/planta de mentol na segunda colheita. Os genótipos de Mentha arvensis, tradicionalmente mais cultivados em função de seu alto teor de mentol, apresentaram menor produção de biomassa e produtividade de óleo essencial e de mentol devido à alta incidência e severidade de ferrugem.

The genus Mentha has 18 species and many chemotypes with inter and intra specific differences. In spite of its great phytochemical diversity, the main economic interest on mint essential oil production is to obtain the constituent menthol. We evaluated the menthol production of 19 genotypes of three Mentha species. The experiment was carried out at field conditions in a randomized block design comparing the vegetative development, essential oil productivity and composition in two harvests. The plants were obtained by stem cuttings from adult plants maintained at greenhouse conditions. The plants were transferred to field at September and harvested in 90-day intervals. Some genotypes, even with high biomass production did not present menthol in the essential oil composition. The highest menthol production was obtained from the genotype 'Peppermint' (Mentha x piperita) with 34.37 mL/plant of menthol at the second harvest. The Mentha arvensis genotypes, traditionally grown because of its high menthol yield, presented low biomass production and essential oil and menthol productivity because of the high incidence and severity of "mint rust".

O cultivo de camomila na região Sul do Brasil tem sido realizado utilizando-se como material genético a cultivar Mandirituba. Apesar da produção de capítulos florais e teor de óleos essenciais apresentado por esta cultivar ser considerado satisfatório, tem sido observada nas regiões produtoras a ocorrência de problemas fitossanitários que resultam em perdas significativas da produção. Este trabalho teve como objetivos comparar materiais genéticos de camomila provenientes da Holanda, Dinamarca e Mandirituba, e avaliar o efeito de diferentes densidades de semeadura no desenvolvimento das plantas, produção de capítulos, rendimento e qualidade do óleo essencial da cultivar Mandirituba, atualmente cultivada na região. Os experimentos foram conduzidos no município de Piraquara (PR). A extração do óleo essencial foi realizada por hidrodestilação em aparelho tipo Clevenger e a determinação da composição do óleo foi feita por cromatografia em fase gasosa acoplada ao espectrômetro de massa (GC/MS). Os materiais genéticos provenientes da Holanda e de Mandirituba apresentaram maior produção de biomassa seca de capítulos, em relação ao material genético da Dinamarca. A cultivar Mandirituba apresentou o maior rendimento de óleo essencial (4,71 mL g-1 ms), sendo também superior em relação à produtividade de óleo essencial (2,40 L ha-1). Os materiais procedentes da Dinamarca e de Mandirituba apresentaram composição do óleo essencial semelhantes. A densidade de plantio de 1,0 kg ha-1 da cultivar Mandirituba resultou em melhor desenvolvimento das plantas e maior produção de óleo essencial. Quantidades superiores a 3,0 kg ha-1 de sementes não resultaram em maior densidade de plantas tendo em vista a alta competição e percentual de plântulas mortas.

The cultivar Mandirituba is the only genetic material for chamomile cultivation in southern Brazil. Besides the limitations regarding floral buds and the yield of essential oil presented by this cultivar, phytosanitary problems have also been observed. The objectives of this work were to compare the genetic materials from the Netherlands, Denmark and Mandirituba and to evaluate the effect of seeding rate on floral heads development and essential oil production, yield and quality. The experiments were carried out at field conditions in Piraquara, Paraná state, Brazil. The essential oil extraction was obtained by hydrodistillation using a Clevenger apparatus and the oil composition was analyzed by gas chromatography coupled to mass spectrometry (GC/MS). The genetic materials from the Netherlands and Mandirituba presented statistically higher dry mass accumulation than the ones from Denmark. However the material from Mandirituba showed a great essential oil yield (4.7 mL g-1 ms) and productivity (2.40 L ha-1). The genetic material from Denmark and Mandirituba showed similar essential oil composition. The density of 1.0 kg ha-1 for cultivar Mandirituba resulted on great plant development and essential oil production. The use of 3.0 kg ha-1 of seeds did not increase plant density due to the high plant competition.

Catalyst based on Kegging-type heteropolyacids (H3PW12O40 - HPA), supported on SiO2 (H3PW), were prepared by the impregnation method under different thermal treatment conditions. The materials were characterized by different instrumental techniques and used as catalysts in the methyl esterification reactions of stearic acid. Using the catalyst with 15% of HPA, conversions higher than 60% were obtained after 2 h of reaction at 65 ºC. Recovery studies using hot-filtration with ethanol at 75 ºC showed satisfactory activity for two additional reaction cycles.

Três óleos essenciais extraídos das folhas, frutos e raízes de Ottonia martiana Miq. (Piperaceae), espécie comum da floresta Atlântica brasileira, e conhecida popularmente por "anestésia", foram analisados por CG-EM e submetidos a um ensaio antibacteriano bioautográfico frente a Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (ATCC 12228), Pseudomonas aerogenes (ATCC 27853) e Escherichia coli (ATCC 25922). Setenta e sete compostos foram identificados e submetidos a uma análise comparativa, a qual revelou uma variabilidade no teor dos componentes majoritários desses óleos (espatulenol, óxido de cariofileno, (E)-nerolidol, viridiflorol, beta-cariofileno, delta cadineno e aloaromadendreno). A presença de zonas de inibição de crescimento bacteriano nos bioautogramas analisados (Rfs 0,29 e 0,34) revelou o potencial antibacteriano dos óleos analisados frente às bactérias Gram-positivas testadas e permitiu identificar alguns dos componentes bioativos.

Three essential oils extracted from leaves, fruits and roots of Ottonia martiana Miq. (Piperaceae), common species in Brazilian Rain Forest, known as "anestésia", were analyzed by GC-MS and tested in an antibacterial assay against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (ATCC 12228), Pseudomonas aerogenes (ATCC 27853) and Escherichia coli (ATCC 25922). Seventy-seven compounds were identified and submitted to a comparative analysis, which revealed variability on the amount of principal components of these oils (spathulenol, caryophyllene oxide, (E)-nerolidol, viridiflorol, beta-caryophyllene,deltacadinene and alloaromadendrene). Inhibition zones of bacterial growth in the bioautograms (Rfs 0.29 and 0.34) showed antimicrobial activity of essential oils against tested Gram-positive bacteria and permitted to identify some bioactive components.

Two amides, piperovatine and isopiperlonguminine, were isolated from the roots of Ottonia martiana Miq., a herbaceous shrub commonly used in folk medicine in the treatment of toothache. The crude extract (CE) and isolated compounds were submitted to bioautography and allelopathic assay. The bioautograms allowed the detection of compounds with antibacterial activity and the identification of the bioactive substance piperovatine. The CE and amides exhibited an allelopathic effect on Lactuca sativa (lettuce) seedling growth but did not affect the seeds' germinability.