RESUMO O microconcreto de alto desempenho é um material que possui dimensão máxima de agregado reduzida e baixa relação água/aglomerante (a/aglm). Com o objetivo de verificar a aplicabilidade em elementos estruturais, estudou-se o comportamento do material e de um pilar executado com microconcreto de alto desempenho. Como referência, estudou-se outro concreto com mesmas proporções de materiais, apenas variando a dimensão máxima do agregado. Avaliaram-se as propriedades no estado fresco, mecânicas e de durabilidade dos materiais. Quanto aos pilares, os mesmos foram submetidos a uma situação de projeto de flexão normal composta. Estes pilares foram instrumentados por meio de extensômetros elétricos de resistência, relógios comparadores e Linear Variable Differential Transformer (LVDT), de forma a obter os deslocamentos horizontais, deformações na face comprimida do concreto e as deformações nas armaduras de aço; também foram acompanhadas as aberturas de fissuras por meio de marcação com pincel atômico. Quanto às propriedades no estado fresco, mecânicas e de durabilidade, verificou-se que o microconcreto teve melhor desempenho em relação ao concreto de referência, desempenho este atribuído às melhores propriedades da zona de interface pasta-agregado. O pilar de microconcreto rompeu por esmagamento do concreto da face comprimida, na região intermediária do pilar. Já o pilar de concreto convencional rompeu numa seção acima da intermediária, e a ruptura ficou caracterizada pelo desplacamento do concreto em duas faces adjacentes, em forma de quina, sugerindo uma ruptura por flexão composta oblíqua. Fez-se a comparação dos resultados experimentais obtidos com os resultados obtidos pelo software Esbelt 2.1, que considera os módulos de elasticidade segundo a NBR 6118 (ABNT, 2003). Ao final, pode-se constatar o melhor comportamento do pilar de microconcreto em relação ao pilar de concreto convencional, em termos de maior rigidez, sugerindo vantagens na aplicação do material em elementos estruturais destinados à préfabricação de elementos com seções transversais delgadas.
ABSTRACT The high-performance microconcrete is a material that has reduced maximum characteristic dimension aggregate and low water / cement ratio (w/c). In order to verify the applicability in structural elements, the behavior of the material and of a pillar executed with high performance microconcrete were studied. As reference, another concrete with the same proportions of materials was studied, only varying the maximum size of the aggregate. The fresh state, mechanical and durability properties of the materials were evaluated. As for the pillars, they were subjected to a project situation of combined compression and one-axis bending. Considering the columns, in order to obtain the horizontal displacements, deformations in the compressed face of the concrete and the strain in the bars, these columns were instrumented by means of strain gages, comparator watches and Linear Variable Differential Transformer (LVDT); The apertures of cracks were also monitored by means of atomic brush marking. As for the properties in the fresh state, mechanical and durability, it was verified that the microconcrete had better performance in relation to the reference concrete that was attributed to the best properties of the interfacial transition zone. The microconcrete column ruptured by crushing concrete from the compressed face in the intermediate region of the column. The conventional concrete column broke in a section above the intermediate one, and the rupture was characterized by the displacement of the concrete in two adjacent shaped faces, suggesting a rupture by oblique combined bending. The results obtained were compared with the results obtained by the software Esbelt 2.1, which considers the modulus of elasticity according to the standard NBR 6118 (ABNT, 2003). At the end, it was possible to observe the best behavior of the microconcrete column in relation to the conventional concrete column, in terms of greater rigidity, suggesting applicability of the microconcrete in structural elements like precasting elements with thin cross-sections.