Abstract The objective of this study was to observe patients’ satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients’ to clinicians’ frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients’ most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients’ satisfaction and dissatisfaction rates to clinicians’ evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients’ opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients’ evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Resumo O objetivo deste estudo foi observar a satisfação dos pacientes com suas restaurações dentárias anteriores diretas e compará-las com a avaliação clínica do dentista usando os critérios FDI (Federation Dental International). Os pacientes pontuaram suas restaurações dentárias (n=106) anteriores em relação à satisfação (satisfatória / insatisfatória). Quando insatisfatória, ele foi entrevistado sobre a queixa. Na mesma sessão, as restaurações dentárias foram avaliadas clinicamente por dois dentistas utilizando os critérios FDI (escore 1-5) quanto aos aspectos estéticos, funcionais e biológicos. Estatística descritiva foi usada para frequências de escores atribuídos por pacientes e clínicos. Para comparar as frequências dos pacientes e dos clínicos, foi aplicado o teste Qui-quadrado (p ≤ 0,05). Os pacientes relataram suas restaurações como 52,8% satisfatórias e 47,8% insatisfatórias. Os clínicos reportaram as mesmas restaurações, 82,3% satisfatória e 17,6% insatisfatória. As queixas mais frequentes dos pacientes referiam-se à cor, seguida da forma anatômica, fratura e retenção do material e forma anatômica proximal. Comparando os índices de satisfação e insatisfação dos pacientes com os clínicos, não houve diferença em relação à estética. A frequência de restaurações insatisfatórias por dentistas foi significativamente menor quando as propriedades funcionais e biológicas foram comparadas com as opiniões dos pacientes. As restaurações foram mais frequentemente relatadas como satisfatórias pelos pacientes, sendo as principais queixas relacionadas a questões estéticas. Quando as avaliações dos clínicos e dos pacientes foram comparadas, observou-se que as frequências de restaurações satisfatórias por pacientes e clínicos foram semelhantes em relação às propriedades estéticas e significativamente diferentes em relação às propriedades funcionais e biológicas.

Aim To evaluate the influence of the biomodification of erosive lesions with a chitosan nanoformulation containing green tea (NanoCsQ) on the clinical performance of a composite resin. Methods The study was performed in a split-mouth, randomized and double-blinded model with 20 patients with 40 erosive lesions. The patient’s teeth were randomized into two groups (n=20) according to the surface treatment: 1) Without biomodification (control), and 2) Biomodification with NanoCsQ solution (experimental). The lesions were restored with adhesive (Tetric N-bond, Ivoclar) and composite resin (IPS Empress Direct, Ivoclar). The restorations were polished and 7 days (baseline), 6 months, and 12 months later were evaluated according to the United States Public Health Service (USPHS) modified criteria, using clinical exam and photographics. Data were analyzed by Friedman’s and Wilcoxon signed-rank tests. Results No significant differences were found between the control and experimental groups (p=0.423), and also among the follow-up periods (baseline, six months, and 12 months) (p=0.50). Regarding the retention criteria, 90% of the restoration had an alpha score in the control group. Only 10% of the restorations without biomodification (control) had a score charlie at the 12-month follow-up. None of the patients reported post-operatory sensitivity. Conclusion The NanoCsQ solution did not negatively affect the performance of the composite resin restorations after 12 months.

ABSTRACT Objective: Evaluate the influence of the most used surgical positioners for lumbar lordosis (LL) in asymptomatic individuals. Methods: Cross-sectional study based on demographic data and radiographic parameters of asymptomatic individuals. For this study, 16 volunteers, 15 males, and one female were selected, and the average age was 24.6 years. They were submitted to lateral radiographs of the lumbar spine in orthostasis in use of the following positioners: gel cushion, gel cushion with hip extension, four-point Relton-Hall and Wilson-type positioner. Results: The mean LL in the orthostatic position was 58.76º, whereas in the gel cushion positioner it was 52.51; on the gel cushion with hip extension of 58.23º, Relton-Hall/4points 37.63º and, finally, on the Wilson-type positioner of 40.87º. An average reduction of 5.42º of the LL was observed when positioning on the gel cushion in relation to the orthostasis. In the linear regression analysis, the data presented statistically significant results (p<0.05), demonstrating that the L4-S1 segment influences 60% in LL. Conclusion: The positioner with gel cushion and hip extension reproduces an LL similar to physiological values. Relton-Hall and Wilson-type positioners with hip flexion promote hypolordotic positioning compared to basal lordosis in orthostasis. Hip extension alone generated a 5.96º increase in the subject’s lordosis. The L4-S1 segment has a 60% influence on the LL when the individuals are in the positioners. Level of evidence III; Controlled cross-sectional study.

RESUMEN: Objetivo: Evaluar la influencia de los posicionadores quirúrgicos para la lordosis lumbar (LL) en individuos asintomáticos. Métodos: Estudio transversal con datos demográficos y parámetros radiográficos de individuos asintomáticos. Utilizamos 16 voluntarios, 15 hombres y una mujer, edad media de 24,6 años. Sometidos a radiografías laterales de la columna lumbar en ortostasis en los siguientes posicionadores: almohadilla de gel, almohadilla de gel con extensión de cadera, posicionador de cuatro puntos y posicionador tipo Wilson. Resultados: El promedio de LL en posición ortostática fue de 58,76º, en el posicionador de almohadilla de gel fue de 52,51º; en almohadilla de gel con extensión de cadera de 58,23º, 4 puntos 37,63º y, por último, en posicionador tipo Wilson de 40,87º. Se observó una reducción promedio de 5,42º de LL al posicionarse sobre la almohadilla de gel en relación a ortostasis. En el análisis de regresión lineal, los datos presentaron resultados estadísticamente significativos (p<0,05), demostrando que el segmento L4-S1 tiene una influencia de 60% en LL. Conclusión: El posicionador con almohadilla de gel y con extensión de cadera reproduce una LL similar a la fisiológica. Relton-Hall y Wilson con flexión de cadera promueven el posicionamiento hipolordótico en comparación con la lordosis basal. La extensión de la cadera por sí sola fue capaz de generar un aumento de 5,96º en la lordosis. El segmento L4-S1 tiene una influencia del 60% en la LL cuando los individuos están en los posicionadores. Nivel de evidencia III; Estudio Transversal Controlado.

RESUMO: Objetivo: Avaliar a influência dos posicionadores cirúrgicos na lordose lombar (LL) em indivíduos assintomáticos. Métodos: Estudo transversal com dados demográficos e parâmetros radiográficos de indivíduos assintomáticos. Utilizamos 16 voluntários, sendo 15 do gênero masculino e uma do gênero feminino, com idade média de 24,6 anos. Foram submetidos a realização de radiografias em perfil da coluna lombar em ortostase nos seguintes posicionadores: coxim em gel, coxim em gel com extensão do quadril, Relton-Hall em quatro pontos e posicionador tipo Wilson. Resultados: A média de LL na posição ortostática foi de 58,76º, já no posicionador coxim em gel de 52,51; no coxim em gel com extensão dos quadris de 58,23º, Relton-Hall/4pontos 37,63º e, por último, no posicionador tipo Wilson, de 40,87º. Houve redução média de 5,42º da LL ao posicionar no coxim em gel em relação a ortostase, na análise de regressão linear os dados apresentaram resultados estaticamente significativos (p<0,05), demostrando que o seguimento L4-S1 apresenta uma influência de 60% na LL. Conclusão: O posicionador coxins em gel e extensão do quadril reproduz uma LL semelhante à fisiológica. Posicionadores do tipo Relton-Hall e Wilson com flexão do quadril promovem um posicionamento hipolordótico comparada a lordose basal em ortostase. A extensão do quadril por si só foi capaz de gerar um aumento de 5,96º na lordose do indivíduo. O seguimento L4-S1 apresenta uma influência de 60% na LL quando os indivíduos estão nos posicionadores. Nível de Evidência III; Estudo Transversal Controlado.

Abstract Background The accuracy of the New York Heart Association (NYHA) classification to assess prognosis may be limited compared with objective cardiopulmonary exercise test (CPET) parameters in heart failure (HF). Objective To investigate the prognostic value of the NYHA classification in addition to Weber class. Methods Adult outpatients with HF undergoing CPET in a Brazilian tertiary care center were included. The physician-assigned NYHA class and the CPET-derived Weber class were stratified into “favorable” (NYHA I or II; Weber A or B) or “adverse” (NYHA III or IV; Weber C or D). Patients with one favorable class and one adverse class were defined as “discordant.” The primary endpoint was time to all-cause mortality. A 2-sided p value < 0.05 was considered statistically significant. Results A total of 834 patients were included. Median age was 57 years; 42% (351) were female, and median left ventricular ejection fraction was 32%. Among patients with concordant NYHA and Weber classes, those with adverse NYHA and Weber classes had significantly higher all-cause mortality compared to those with favorable classes (hazard ratio [HR]: 5.65; 95% confidence interval [CI]: 3.38 to 9.42). Among patients with discordant classes, there was no significant difference in all-cause mortality (HR: 1.38; 95% CI: 0.82 to 2.34). In the multivariable model, increments in NYHA class (HR: 1.55 per class increase; 95% CI: 1.26 to 1.92) and reductions in peak VO 2 (HR: 1.47 per 3 ml/kg/min decrease; 95% CI: 1.28 to 1.70) significantly predicted mortality. Conclusions Physician-assigned NYHA class and objective CPET measures provide complementary prognostic information for patients with HF.

Resumo Fundamento A precisão da classificação da New York Heart Association (NYHA) para avaliar o prognóstico pode ser limitada em comparação com os parâmetros objetivos do teste de exercício cardiopulmonar (TECP) na insuficiência cardíaca (IC). Objetivo Investigar o valor prognóstico da classificação da NYHA e da classe Weber. Métodos Foram incluídos pacientes ambulatoriais adultos com IC submetidos a TECP em um centro terciário brasileiro. A classe NYHA atribuída pelo médico e a classe Weber derivada do TECP foram estratificadas como “favorável” (NYHA I ou II com Weber A ou B) ou “adversa” (NYHA III ou IV com Weber C ou D). Pacientes com uma classe favorável e uma classe adversa foram definidos como “discordantes”. O desfecho primário foi o tempo para mortalidade por todas as causas. Um valor de p bilateral < 0,05 foi considerado estatisticamente significativo. Resultados Foram incluídos 834 pacientes. A mediana de idade foi de 57 anos; 42% (351) eram do sexo feminino e a mediana da fração de ejeção do ventrículo esquerdo foi de 32%. Entre os pacientes com classes NYHA e Weber concordantes, aqueles com classes NYHA e Weber adversas tiveram mortalidade por todas as causas significativamente maior em comparação com aqueles com classes favoráveis ( hazard ratio [HR]: 5,65; intervalo de confiança de 95%: 3,38 a 9,42). Entre os pacientes com classes discordantes, não houve diferença significativa na mortalidade por todas as causas (HR: 1,38; intervalo de confiança de 95%: 0,82 a 2,34). No modelo multivariado, incrementos na classe NYHA (HR: 1,55 por aumento na classe; intervalo de confiança de 95%: 1,26 a 1,92) e reduções no VO 2 pico (HR: 1,47 por diminuição de 3 ml/kg/min; intervalo de confiança de 95%: 1,28 a 1,70) previu significativamente a mortalidade. Conclusões A classe NYHA atribuída pelo médico e as medidas objetivas do TECP fornecem informações prognósticas complementares para pacientes com IC.

Abstract The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material.

ABSTRACT Objective: To describe the epidemiological profile of the list of patients with pediatric scoliosis (0 to 18 years old) treated at a tertiary public hospital in the Midwest Region. Methods: A cross-sectional analytical study of patients with scoliosis from the orthopedic service of a reference center was carried out, and data collected on age, sex, date of menarche, weight, height, etiology, curve classification, form of referral, treatment performed before and after care and waiting time for surgery after indication. The sample consisted of 60 patients randomly selected among those treated. Results: 60 patients were evaluated, 44 (73.3%) were female, and 16 (26.7%) were male, with a mean age of 13.4 years. Until the moment of the study, six patients underwent surgery after being treated at the reference center. Idiopathic scoliosis was the most frequent in 38 (63%) patients. No conduct had been performed in 47 (78.3%) patients before referral to the reference center. Aftercare at the reference center, surgical treatment was indicated in 44 (73.3%) patients. The mean waiting time for surgery after the indication was 22 months, ranging from 6 to 40 months. Conclusions: The list of patients with pediatric scoliosis treated at the reference center in the Midwest region is composed of young girls with idiopathic scoliosis who, for the most part, did not have the indication of using a brace before being referred to the reference center, and most of them had an indication for surgery for adequate treatment. Level of Evidence IV; Descriptive Study.

RESUMEN Objetivo: Describir el perfil epidemiológico de pacientes con escoliosis pediátrica (0 a 18 años) atendidos en un hospital público terciario de la Región Centro Oeste. Métodos: Se realizó un estudio analítico transversal de pacientes con escoliosis del servicio de ortopedia del centro de referencia y se recogieron datos sobre edad, sexo, fecha de la menarquia, peso, talla, etiología, clasificación de la curva, forma de derivación, tratamiento realizado antes y después de la atención y el tiempo de espera para la cirugía después de la indicación. La muestra estuvo constituida por 60 pacientes seleccionados aleatoriamente. Resultados: De los 60 pacientes, 44 (73,3%) eran mujeres y 16 (26,7%) hombres, con edad media de 13,4 años. Hasta el momento del estudio, seis pacientes fueron intervenidos quirúrgicamente. La escoliosis idiopática fue la más frecuente, en 38 (63%) pacientes. En 47 (78,3%) pacientes no se había realizado ninguna conducta antes de la derivación al centro de referencia. Tras la atención en el centro de referencia, se indicó tratamiento quirúrgico en 44 (73,3%) pacientes. El tiempo medio de espera de la cirugía fue de 22 meses, con un rango de 6 a 40 meses. Conclusiones: La lista de pacientes con escoliosis pediátrica atendidos en el único centro de referencia de la región Centro Oeste está compuesta por niñas jóvenes, quienes en su mayor parte no tenían indicación de uso de ortesis, y la mayoría tenía indicación de cirugía para un adecuado tratamiento. Nivel de evidencia IV; Estudio Descriptivo.

RESUMO Objetivo: Descrever o perfil epidemiológico da lista de pacientes com escoliose pediátrica (0 a 18 anos) atendidos em hospital público terciário da Região Centro-Oeste. Métodos: Foi realizado estudo analítico transversal de pacientes com escoliose do serviço de ortopedia do centro de referência e coletados dados de idade, sexo, data da menarca, peso, altura, etiologia, classificação da curva, forma de encaminhamento, tratamento realizado antes e após o atendimento e tempo de espera para cirurgia após indicação. A amostra foi composta por 60 pacientes selecionados randomicamente. Resultados: Dos 60 pacientes avaliados, 44 (73,3%) eram do sexo feminino e 16 (26,7%) do sexo masculino, com idade média de 13,4 anos. Até o momento do estudo, seis pacientes foram submetidos a cirurgia após o atendimento no centro de referência. A escoliose idiopática foi a mais frequente em 38 (63%) pacientes. Nenhuma conduta havia sido realizada em 47 (78,3%) pacientes antes do encaminhamento ao centro de referência. Após o atendimento no centro de referência, o tratamento cirúrgico foi indicado em 44 (73,3%) pacientes. O tempo médio de espera pela cirurgia após a indicação foi de 22 meses, variando de 6 a 40 meses. Conclusões: A lista de pacientes com escoliose pediátrica atendidos no único centro de referência da região Centro-oeste é composta por meninas jovens, com escoliose idiopática, que em grande parte não tiveram a indicação do uso de colete antes do encaminhamento ao centro de referência, e tiveram em sua maioria indicação de cirurgia para tratamento adequado. Nível de Evidência IV; Estudo Descritivo.

Abstract Objective To develop a low-cost simulator model and a colonoscope with materials that are easily accessible to offer training on colonoscopy skills during undergraduate studies. Since this is the procedure of choice for colorectal cancer screening, the general practitioner must be able to recognize its main indications, preparation, and complications. Methods Using materials such as a mannequin, a vehicle inspection camera, a conduit, polyvinyl chloride (PVC) pipe, acrylic, wood, and red paint, we built a simulator and a 150-cm long and 20-to-25-mm thick colonoscope. The colonoscope’s handle and handhold were made of acrylic, the colonoscope’s mobile end was made with articulated PVC rings, and the up and down movements were performed according to the traction of the steel cables. The camera attached to its distal end enables connection to a smartphone to view the image. In the simulator, the conduit was inserted into the mannequin to simulate the curvatures of the colon. Red spray paint was used to simulate the staining of the colonic mucosa in the inner region of the mannequin and the adventitial layer in the outer region. Results We were able to build a simulator and a colonoscope with a total amount of R $ 182.82 (roughly US$ 36.50). Both were tested and proved to be useful in the acquisition of psychomotor and cognitive skills in colonoscopy. Conclusion The simulator and colonoscope developed by us are cost-effective, useful in the acquisition of psychomotor and cognitive skills in colonoscopy, and can facilitate the structuring of a training program for undergraduate students.

RESUMO A postura em pé durante o trabalho tem sido associada a sintomas musculoesqueléticos. Entretanto, há poucos estudos que avaliam o tempo em pé utilizando medidas objetivas. Assim, o objetivo deste estudo foi verificar se o tempo em pé no trabalho está associado com dor na coluna lombar e nos membros inferiores nos últimos sete dias e 12 meses em cuidadoras de idosos e trabalhadoras da limpeza. Trata-se de estudo transversal, em que o tempo em pé no trabalho foi quantificado por meio de inclinômetros fixados na coxa e na coluna vertebral, e os sintomas musculoesqueléticos foram avaliados por meio do Questionário Nórdico de Sintomas Osteomusculares. Os dados foram analisados por meio da correlação ponto bisserial (rpb) entre o tempo em pé no trabalho e a presença de sintomas musculoesqueléticos. As análises foram realizadas por meio do software SPSS e o nível de significância adotado foi de 5%. Verificou-se que as trabalhadoras passam a maior parte do tempo em pé paradas (41,3%) ou andando (39,3%). Houve correlação positiva entre a presença de sintoma na lombar e o tempo em pé (rpb=0,52; p<0,05) e correlação negativa entre o tempo andando e sintomas no quadril (rpb=−0,53; p<0,05) nos últimos 12 meses e o tempo correndo e sintomas no quadril (rpb=−0,43; p<0,05) e na coluna lombar (rpb=−0,43; p<0,05) nos últimos sete dias. O maior tempo em pé foi correlacionado com a presença de sintomas na lombar; enquanto o menor tempo andando e correndo foram correlacionados com a presença de sintomas no quadril e na coluna lombar.

ABSTRACT Maintaining a standing posture during work has been associated with musculoskeletal symptoms. Few studies, however, assess the standing time using objective measures. Thus, this study aimed to verify whether standing time at work is associated with lower back and lower limb pain in the last seven days and last 12 months in caregivers of older adults and cleaners. This is a cross-sectional study. Standing time at work was quantified using inclinometers attached to the workers’ thigh and spine. Musculoskeletal symptoms were assessed using the Nordic Musculoskeletal Questionnaire. Data were analyzed using the point-biserial correlation coefficient (rpb) between standing time at work and the presence of musculoskeletal symptoms. The analyses were performed using the SPSS software, adopting 5% significance level. Workers spend most of their time standing still (41.3%) or walking (39.3%). The presence of symptoms in the lower back was positively correlated with standing time (rpb=0.52; p<0.05). Walking time was negatively correlated with symptoms at the hip in the last 12 months (rpb=−0.53; p<0.05) and running time with symptoms at the hip, in the last seven days, (rpb=−0.43; p<0.05) and the lower back (rpb=−0.43; p<0.05). Longer standing time was correlated with the presence of symptoms in the lower back. Meanwhile, less time walking and running were correlated with the presence of musculoskeletal symptoms in the hips and lower back.

RESUMEN La postura de trabajo de pie está asociada con síntomas musculoesqueléticos. Sin embargo, hay pocos estudios que evalúan el tiempo prolongado en esta postura utilizando medidas objetivas. Por esto, el objetivo de este estudio fue verificar si el tiempo prolongado al trabajar de pie está asociado al dolor en la columna lumbar y en los miembros inferiores de los cuidadores de ancianos y los trabajadores de limpieza entre los últimos siete días y 12 meses de trabajo. Se trata de un estudio transversal, en el que se cuantificó el tiempo prolongado en el trabajo de pie por medio de inclinómetros fijados en el muslo y la columna vertebral, y los síntomas musculoesqueléticos fueron evaluados por el Cuestionario Nórdico de Síntomas Musculoesqueléticos. Para el análisis de datos se utilizó la correlación biserial puntual (rpb) entre el tiempo prolongado en el trabajo de pie y la presencia de síntomas musculoesqueléticos. Los análisis se realizaron con el software SPSS, y se adoptó el nivel de significación del 5%. Se constató que las trabajadoras pasaban la mayor parte del tiempo paradas (41,3%) o caminando (39,3%). Hubo una correlación positiva entre la presencia de síntomas en la región lumbar y el tiempo prolongado de pie (rpb=0,52; p<0,05) y una correlación negativa entre el tiempo al caminar y los síntomas en la cadera (rpb=−0,53; p<0,05) en los últimos 12 meses, y el tiempo al correr y los síntomas en la cadera (rpb=−0,43; p<0,05) y en la columna lumbar (rpb=−0,43; p<0,05) en los últimos siete días. El mayor tiempo prolongado de pie se correlacionó con la presencia de síntomas en la región lumbar, mientras que el menor tiempo al caminar y correr se correlacionó con la presencia de síntomas en la cadera y columna lumbar.

Analytical methods for determining 14 endocrine-disrupting compounds (EDCs) in coastal waters, suspended particles, and sediment samples were successfully performed by ultrafast liquid chromatography with photodiode array and fluorescence detections (UFLC-PDA-FLD). Solid phase extraction (SPE) and ultrasound-assisted extraction (USE) were used for sample preparation. Two chromatographic methods have been developed. An isocratic separation method was used to separate bisphenol A (BPA) and steroids and another gradient elution method to separate phthalates and alkylphenols. The detection by fluorescence was used for alkylphenols, BPA, and steroids and photodiode array (PDA) for phthalates. Limits of detection (LOD) ranged from 0.41 (4-tert-octylphenol (4tOP)) to 63 ng L-1 (dibutylphthalate (DBP)), 0.41 (4tOP) to 63.2 ng g-1 dried weight (dw) coastal waters, and solid samples (suspended particulate matter (SPM) and sediment samples), respectively. Recoveries ranged from 52 (diethylphthalate (DEP)) to 116% (DBP) for water, from 54 (DEP) to 108% (estrone (E1)) for SPM, and from 62 (4-n-nonylphenol (4nNP)) to 117% (4-n-octylphenol (4nOP)) for sediment samples. Finally, with the minimization of reagents and energy, the proposed methods were applied to samples collected from Todos os Santos Bay (BTS), Bahia, Northeastern Brazil.

Resumo Sequoia sempervirens (sequoia) é uma espécie conhecida pela qualidade superior de sua madeira, sendo a produção de mudas por miniestaquia uma alternativa viável. O objetivo do trabalho foi avaliar a posição de coleta, presença ou ausência de folhas aciculares em miniestacas e a produção de mudas cultivadas em diferentes substratos e utilização de AIB. Foram utilizadas miniestacas de diferentes clones, oriundas de minijardim clonal. Para o padrão de miniestacas utilizou-se a porção lignificada, com média lignificação e pouca lignificação, na presença ou ausência de folhas aciculares, avaliando-se um clone. Em relação aos substratos, observou-se o comportamento de três clones e quatro substratos de marcas comerciais. Para o emprego de regulador de crescimento utilizou-se um clone e diferentes concentrações de AIB (0,0 a 5000 mg L-1). As miniestacas foram colocadas para enraizar em estufim e avaliadas aos 90 dias. Todos os experimentos foram instalados em delineamento inteiramente casualizado, com posterior avaliação da porcentagem de sobrevivência; porcentagem de miniestacas com calos; porcentagem de miniestacas enraizadas e número de raízes emitidas por miniestaca enraizada. Miniestacas pouco lignificadas (ápice) com folhas aciculares apresentaram os melhores resultados para sobrevivência (96%) e enraizamento (94%); miniestacas muito lignificadas sem folhas aciculares obtiveram baixo enraizamento (10%). Houve considerável variação de enraizamento entre os substratos (66 a 100%) e o número de raízes foi mais influenciado pelo clone utilizado. Os melhores resultados foram observados naqueles com componentes mais orgânicos. O emprego de AIB na miniestaquia não foi significativo para nenhuma das variáveis analisadas. Miniestacas coletadas em porções apicais e com presença de folhas aciculares mostraram-se mais indicadas para trabalhos com a espécie. Para a seleção do melhor substrato deve-se observar o efeito clonal, priorizando-se substratos com composição mais orgânica. A utilização de AIB não influenciou positivamente o enraizamento de miniestacas, não sendo recomendado o seu uso.

Abstract Sequoia sempervirens (sequoia) is a species known for the superior quality of its wood, making plants production by minicuttings a viable alternative. The objective of the work was to evaluate the position of collection, presence or absence of acicular leaves in minicuttings and production of plants grown on different substrates and use of IBA. Minicuttings from different clones, from a clonal minigarden, were used. For the minicuttings pattern, use a lignified portion, with medium lignification and little lignification, in the presence or absence of acicular leaves, available if a clone. Regarding substrates, the behavior of three clones and four substrates of commercial brands. For the growth regulator, was used a clone and different concentrations of IBA (0.0 to 5000 mg L-1). Minicuttings were placed to root in mini-tunnel and evaluated at 90 days. All experiments were installed in completely randomized design, with subsequent assessment of the percentage of survival; percentage of minicuttings with calluses; percentage of rooted minicuttings and number of roots emitted by rooted minicuttings. Little lignified minicuttings (apex) with acicular leaves, showed the best results for survival (96%) and rooting (94%); very lignified minicuttings without acicular leaves obtained low rooting (10%). There was considerable variation in rooting between substrates (66 to 100%) and the number of roots was more influenced by the clone used. The best results were observed in those with more organic components. The use of IBA in the minicutting was not significant for any of the variables analyzed. Minicuttings collected in apical portions and with the presence of acicular leaves are more suitable for work with a species. To select the best substrate, must be observe the clonal effect, prioritizing substrates with a more organic composition. The use of IBA did not positively influence or reduce minicuttings, it was not recommended or its use.

Abstract Degradation of the dentin-resin interface can occur due to hydrolysis of exposed collagen, resulting in reduced bond strength. This study assessed the effect of dentin treatment with chitosan combined with an etch-and-rinse or self-etch adhesive system on improvement of bond strength and preservation of the interface durability. Methodology Enamel was removed from 80 molars and the teeth were divided into two groups: without chitosan (control) or with 2.5% chitosan gel (1 min). They were further subdivided into two subgroups according to the adhesive system: etch-and-rinse or self-etch. Dentin was restored using a composite resin. Half of the specimens from each restored group were subjected to interface aging and the remaining specimens were used for immediate analysis. The specimens were sectioned and subjected to microtensile bond strength (µTBS) test (n=10), chemical composition testing using Fourier-transform infrared (FTIR) spectroscopy (n=4) and energy-dispersive spectroscopy (EDS) (n=5), and morphological analysis of the adhesive interface using scanning electron microscopy (SEM) (n=5). Data were analyzed using three-way ANOVA. Results Chitosan improved the µTBS of the adhesive interface when compared with the control group (p=0.004). No significant differences were observed in dentin adhesion between the adhesive systems (p=0.652). Immediate µTBS was not significantly different from that after 6 months (p=0.274). EDS and SEM did not show significant differences in the chemical and structural composition of the specimens. FTIR showed a decrease in the intensity of phosphate and carbonate bands after using chitosan. Conclusions Dentin treatment with chitosan combined with an etch-and-rinse or self-etch adhesive system improved the immediate and preserved the 6-month bond strength of the adhesive interface.

ABSTRACT Purpose To develop a model of induction of type-2 diabetes (DM2) by combining low doses of streptozotocin (STZ) and a cafeteria diet. Methods Forty male Wistar rats (200 g) were allocated into four groups: control (non-diabetic, n = 10); STZ 30 mg/kg (diabetic, n = 10); STZ 35 mg/kg (diabetic,n = 10); and STZ 40 mg/kg (diabetic, n = 10). DM2 was induced with a single intraperitoneal injection of STZ after four weeks of cafeteria diet in the three diabetic groups. All animals were evaluated as for anthropometric, and biochemical analyses, as well as liver, kidney and pancreas histological analyses. Results Lower weight gain, higher water intake, higher Lee index, hyperglycemia and modified total protein, urea, alpha-amylase, as well as insulin resistance, hepatic steatosis, pancreas, and kidney injury were observed in animals treated with 35 and 40 mg/kg of STZ. Conclusions The results show that the experimental model using cafeteria diet associated with 35 mg/kg of STZ is a low-cost model and efficient in order to develop DM2, confirmed by the presence of polydipsia, hyperglycemia, altered biochemical tests, insulin resistance and damages to the liver, pancreas and kidney, which is similar to the disease found in humans.

RESUMO A ruptura do ligamento cruzado anterior (LCA) representa mais da metade das lesões do joelho em esportes que envolvem rotações e mudanças repentinas de direção. A liberação do atleta para o retorno ao esporte (RAE) depois da reconstrução do LCA (RLCA) é uma tarefa difícil, de responsabilidade multidisciplinar. Por muitos anos, o período de seis meses pós-RLCA foi utilizado como único critério para RAE. Contudo, atualmente, sugere-se que o RAE não deve estar atrelado exclusivamente ao tempo, mas a dados clínicos e avaliações sistemáticas. Apesar da importância dos fatores pós-RLCA para o RAE, os fatores pré- e peri-RLCA também devem ser contemplados. Historicamente, a RLCA é realizada com tendões isquiotibiais ou patelares autólogos, apesar da escolha do enxerto ainda ser um tema em aberto e em constante evolução. Recentemente, a reconstrução do ligamento anterolateral e o reparo da lesão na rampa meniscal associadas à RLCA têm sido sugeridas como estratégias para melhorar a estabilidade articular do joelho. Questionários subjetivos são de fácil aplicação e ajudam a identificar fatores físicos ou psicológicos que possam dificultar o RAE. Testes funcionais como os hop tests e a avaliação de força com dinamômetros isocinéticos são ferramentas fundamentais na decisão quando aliadas à avaliação clínica e de ressonância magnética. Recentemente, tem-se incorporado ao escopo de avaliação da força muscular a capacidade de gerar força de maneira explosiva, mensurada através da taxa de desenvolvimento de torque (TDT). Devido a características inerentes a prática esportiva os tempos disponíveis para produção de força são demasiadamente pequenos e, sendo assim, a TDT parece representar melhor as demandas esportivas do que a avaliação isolada de força máxima. Nesta revisão, foram reunidos fatores pré, peri e pós-RLCA estabelecidos na literatura, assim como foi compartilhada nossa prática clínica, que consideramos ser a melhor para o RAE. Nível de evidência V; Opinião do especialista.

ABSTRACT The anterior cruciate ligament (ACL) tear represents more than half of all knee injuries in sports that involve body rotations and sudden changes of direction. Discharging the athlete for return to play (RTP) post-ACL reconstruction (ACLR) is a difficult task with multidisciplinary responsibility. For many years, a six-month period post-ACLR was adopted as the only criterion for RTP. However, it is now suggested that RTP should not be exclusively time-based, but to clinical data and systematic assessments. Despite the importance of post-ACLR factors for RTP, pre- and peri-ACLR factors must also be considered. Historically, ACLR is performed with the hamstring or autologous patellar tendons, although the choice of graft is still an open and constantly evolving theme. Anterolateral ligament reconstruction and repair of meniscal ramp tear associated with ACLR have recently been suggested as strategies for improving knee joint stability. Subjective questionnaires are easy to apply, and help identify physical or psychological factors that can hamper RTP. Functional tests, such as hop tests and strength assessment by means of isokinetic dynamometers, are fundamental tools for decision making when associated with clinical evaluation and magnetic resonance imaging. Recently, the capacity to generate force explosively has been incorporated into the muscle strength assessment. This is quantified through the rate of torque development (RTD). Due to characteristics inherent to the practice of sport, there is an extremely short time available for produce strength. Thus, RTD seems to better represent athletic demands than the maximum strength assessment alone. This review investigates the pre-, peri- and post-ACLR factors established in the literature, and shares our clinical practice, which we consider to be best practice for RTP. Level of evidence V; Specialist opinion.

RESUMEN La ruptura del ligamento cruzado anterior (LCA) representa más de la mitad de las lesiones de rodilla en deportes que involucran rotaciones y cambios repentinos de dirección. La liberación del atleta para el retorno al deporte (RAD) después de la reconstrucción del LCA (RLCA) es una tarea difícil, de responsabilidad multidisciplinaria. Durante muchos años, el período de seis meses post-RLCA fue usado como único criterio para RAD. Sin embargo, actualmente, se sugiere que el RAD no debe estar vinculado exclusivamente al tiempo, sino a datos clínicos y evaluaciones sistemáticas. A pesar de la importancia de los factores post-RLCA para el RAD, también deben ser contemplados los factores pre y peri-RLCA. Históricamente, la RLCA es realizada con tendones isquiotibiales o patelares autólogos, a pesar de que la elección del injerto aún sea un tema abierto y en constante evolución. Recientemente, la reconstrucción del ligamento anterolateral y la reparación de la lesión en la rampa meniscal asociadas a la RLCA han sido sugeridas como estrategias para mejorar la estabilidad articular de la rodilla. Los cuestionarios subjetivos son de fácil aplicación y ayudan a identificar los factores físicos o psicológicos que pueden dificultar el RAD. Los tests funcionales como los hop tests y la evaluación de fuerza con dinamómetros isocinéticos son herramientas fundamentales en la decisión cuando se combinan a la evaluación clínica y de resonancia magnética. Recientemente, se ha incorporado al alcance de evaluación de la fuerza muscular, la capacidad de generar fuerza de manera explosiva, medida a través de la tasa de desarrollo de torque (TDT). Debido a características inherentes a la práctica deportiva, los tiempos disponibles para producción de fuerza son demasiado pequeños y, siendo así, la TDT parece representar mejor las demandas deportivas que la evaluación aislada de fuerza máxima. En esta revisión fueron reunidos factores pre, peri y post-RLCA establecidos en la literatura, así como fue compartida nuestra práctica clínica, que consideramos la mejor para el RAD. Nivel de evidencia V; Opinión del especialista.

ABSTRACT White mold, caused by Sclerotinia sclerotiorum, is one the most devastating disease on soybean worldwide. Considering the potential of phosphites to protect plants against different diseases, this study investigated the possibility of using potassium (K), calcium (Ca), and zinc (Zn) phosphites for white mold control in soybean. The contact effect of the phosphites on fungal mycelial growth was evaluated in vitro. In the greenhouse study, plants were inoculated with S. sclerotiorum at 48 h after being sprayed with water (control), K, Ca, and Zn phosphites by using an agar plug (0.8 cm2) containing fungal mycelia. Lesion area of white mold and chlorophyll (Chl) a fluorescence parameters were evaluated on the leaflets of plants at 96 h after inoculation. The Chl a parameters were also evaluated in noninoculated leaflets at the same time. Fungal mycelial growth was abundant in the absence of phosphites, but inhibited in the presence of the three phosphites indicating their direct effect. The lesion area in the leaflets of plants sprayed with K, Ca, and Zn phosphites were 90, 98, and 68% lower, respectively, compared to plants sprayed with water. The functionality of the photosynthetic apparatus was more preserved on the leaflets of plants sprayed with phosphites due to the lower lesions size, especially for the Ca phosphite. In conclusion, the K, Ca, and Zn phosphites were effective in reducing white mold symptoms mainly through a contact effect on the fungal mycelial growth.