Abstract A hemispherical dielectric lens antenna is proposed to provide beam-steering for communication networks operating in X-band. Two different printed antennas are simultaneously used to guarantee high performance and diversity of applications, one a wideband linear polarized antenna, and the other a narrowband circular polarized antenna. To ensure this, the design relies on adding printed angled feeders correctly positioned in relation to the center of a homogeneous dielectric lens. A prototype was simulated, fabricated and tested. The measured results show that the antenna is capable of operating from 8.0 GHz to 12 GHz (gain of 14.2 dBi) or 9.5 GHz to 10 GHz (gain of 17.52 dBi).

Abstract This work reports the development of a simple, low-profile and ultra-wideband printed antenna. The proposed antenna is based on a truncated ground plane and an impedance matching structure formed by a round junction and two chamfers; these modifications significantly increase the antenna frequency bandwidth compared to conventional microstrip antennas and ultra-wideband printed monopoles published in literature. An antenna prototype was fabricated using an Arlon DiClad 880 substrate with an electrical permittivity of 2.2. A bandwidth of 176% was attained at a central frequency of 14.9 GHz (ranging from 1.79 to 28.02 GHz). Numerical simulations and experimental results of the antenna's radiation pattern are also reported and exhibit good agreement. To the best of our knowledge, this is the widest bandwidth from a printed antenna that has been published in the literature.

Abstract In Brazil, about 25-30% of the population has some degree of intolerance to lactose, a disorder associated with the inability of the body to digest lactose due to a disability or absence of the enzyme lactase. The goal of this study was to evaluate the performance of adsorption of lactose from fresh milk using a fixed bed column of molecularly imprinted polymer (MIP). The polymeric material was characterized using Scanning electron microscopy (SEM) analysis, thermal analysis (e.g., differential scanning calorimetric (DSC) and thermogravimetric analysis (TGA), Fourier Transform Infrared Spectroscopy (FTIR), and the method of Braunauer, Emmet and Teller (BET). The adsorption column dynamics and performance were studied by the breakthrough curves using a 24-1 fractional factorial design. The chemical and structural characterization of the pure matrix and imprinted polymers confirmed the molecularly imprinted polymer (MIP) imprinted with lactose. The highest capacity was 62.21 mgg-1, obtained at 307.1 K and a flow rate of 12.5 mL.min-1, with central point conditions, 320.1 K and 9 mL.min-1, with an average value of 50.9 mg.g-1. The results indicate that the molecularly imprinted polymer is efficient.

We aimed to evaluate knowledge of first aid among new undergraduates and whether it is affected by their chosen course. A questionnaire was developed to assess knowledge of how to activate the Mobile Emergency Attendance Service - MEAS (Serviço de Atendimento Móvel de Urgência; SAMU), recognize a pre-hospital emergency situation and the first aid required for cardiac arrest. The students were also asked about enrolling in a first aid course. Responses were received from 1038 of 1365 (76.04%) new undergraduates. The questionnaires were completed in a 2-week period 1 month after the beginning of classes. Of the 1038 respondents (59.5% studying biological sciences, 11.6% physical sciences, and 28.6% humanities), 58.5% knew how to activate the MEAS/SAMU (54.3% non-biological vs 61.4% biological, P=0.02), with an odds ratio (OR)=1.39 (95%CI=1.07-1.81) regardless of age, sex, origin, having a previous degree or having a relative with cardiac disease. The majority could distinguish emergency from non-emergency situations. When faced with a possible cardiac arrest, 17.7% of the students would perform chest compressions (15.5% non-biological vs 19.1% biological first-year university students, P=0.16) and 65.2% would enroll in a first aid course (51.1% non-biological vs 74.7% biological, P<0.01), with an OR=2.61 (95%CI=1.98-3.44) adjusted for the same confounders. Even though a high percentage of the students recognized emergency situations, a significant proportion did not know the MEAS/SAMU number and only a minority had sufficient basic life support skills to help with cardiac arrest. A significant proportion would not enroll in a first aid course. Biological first-year university students were more prone to enroll in a basic life support course.

A estrutura de um biomaterial para regeneração óssea é fator chave para seu sucesso clínico. Não existe um único biomaterial usado para reparo e regeneração óssea capaz de preencher todos os requisitos para um enxerto ósseo ideal. Assim, optou-se por utilizar neste estudo dois biomateriais largamente utilizados na engenharia de tecido ósseo, a policaprolactona (PCL) e cerâmica bifásica (BCP). Neste estudo, compósitos porosos tridimensionais de PCL:BCP (3:1 e 1:1 p:p) foram fabricados utilizando a combinação das técnicas de evaporação do solvente e lavagem de partículas de sal com ou sem a adição de Angiotensina (Ang)-(1-7). Os compósitos de PCL:BCP com alta porosidade e interconectividade obtidos foram analisados usando microtomografia computadorizada (µ-CT). A viabilidade dos compósitos com e sem a adição da Ang-(1-7) foram analisados utilizando osteoblastos de cultura primária nos períodos de 3 e 7 dias utilizando o teste de MTT e secreção de Fosfatase Alcalina. Diferenças significativas de todas as variáveis foram testadas através de análises multivariáveis (p<0,05). Demonstrou-se uma estrutura mais uniformemente distribuída quando a razão PCL/BCP foi aumentada. A conectividade dos poros foi mensurada através do índice de fragmentação (FI) demonstrando estruturas desconexas nas amostras analisadas possuindo valores de FI próximos. Quanto maior a razão PCL/BCP, maior a dimensão fractal (FD). Análises in vitro utilizando o teste do MTT demonstraram que as amostras contendo ou não Ang-(1-7) possuíram efeitos citotóxico médio e moderado, respectivamente. A análise da atividade de fosfatase alcalina não monstrou diferença entre as amostras no período de 3 dias decrescendo sua atividade nas amostras contendo Ang-(1-7) no período de 7 dias. Dessa forma, utilizando a combinação das técnicas de evaporação do solvente e lavagem do sal, obtiveram-se estruturas porosas tridimensionais, desejável para defeitos ósseos tendo capacidade para sistema de transporte de drogas podendo ser avaliada em futuros testes in vivo.

Highly porous three-dimensional biodegradable scaffolds was obtained from beta-tricalcium phosphate-hydroxyapatite bioceramic (BCP), PCL, and Angiotensin-(1-7). We used the solvent casting and particulate leaching methods (SC/PL). The processed scaffolds were characterized by X-ray microtomography (µ-CT). Biocompatibility tests in vitro were performed during three and seven days using MTT and Alkaline Phosphatase Activity (APA) assays. Both the MTT activity and APA were evaluated using a one-way ANOVA test. The µ-CT results showed that the increase of the PCL:BCP weight ratio leads to structures with lower pore sizes. The pore interconnectivity of the processed scaffolds was evaluated in terms of the fragmentation index (FI). We observed that the obtained composites present poorly connected structures, with close values of FI. However, as the polymer phase is almost transparent to the X-rays, it was not taken into consideration in the µ-CT tests. The MTT activity assay revealed that scaffolds obtained with and without Angiotensin-(1-7) present mild and moderate cytotoxic effects, respectively. The APA assay showed that the rat osteoblasts, when in contact for three days with the PCL composites, presented an APA similar to that observed for the control cells. Nevertheless, for an incubation time of seven days we observed a remarkable decrease in the alkaline phosphatase activity. In conclusion, using the solvent casting and salt leaching method we obtained 3D porous that are composites of PCL, BC and Ang-(1-7), which have suitable shapes for the bone defects, a high porosity and interconnect pores. Furthermore, the viability in vitro showed that the scaffolds have potential for drug delivery system and could be used in future in vivo tests.