Abstract Saccharomyces cerevisiae (S. cerevisiae) has been studied as a model microorganism to understand the mechanism of glutathione (GSH) production. Furthermore, magnetic field (MF) application is a novel approach to stimulate microorganism metabolism to increase growth and produce more biomolecules. This study aimed to evaluate whether GSH production by S. cerevisiae ATCC 7754 would be affected by different pressure levels and MF application in an airlift bioreactor. Influence of pressure (0.0 - 0.15 MPa), medium recycle velocity (3.0 and 15.0 cm s-1) and MF application (0.0 and 3.0 mT) was evaluated. Biomass and GSH concentrations at high pressure and medium recycle velocity were higher than the ones in the control, whereas MF decreased biomass and GSH concentrations. The best results of biomass concentration and GSH production were 17.79 g L-1 and 162.92 mg L-1, respectively. at 0.05 MPa, 15.0 cm s- 1 and without any MF application. Results of the pressured airlift bioreactor showed that this kind of reactor may be used for producing GSH and for reducing energy costs.

ABSTRACT Spirulina is a microalgal genre that has the capacity to produce various bioproducts with applications in several areas including the energy sector. The study aimed to assess the ability of CO2 biofixation, biodiesel and other biocompounds production by Spirulina sp LEB 18 cultured in air-lift photobioreactor. The microalgae presented a rich macronutrient composition: protein (47.3%), carbohydrates (13.4%) and a high lipid content (32.7%) in a media with nitrogen reduction, CO2 using air-lift photobiorector. Furthermore, 160 mg.L.d-1 of CO2 was biofixed, generating a maximum biomass yield of 0.02 g.L.d-1. The lipids evaluated for biodiesel production presented a theoretical yield of 19.8% for in situ transesterification and 47.9% for conventional transesterification. The microalgal biomass has potential for producing biodiesel that can be applied instead or in mixture with traditional diesel fuel. The study of obtaining energy associated with the production of other high value-added biocompounds from the microalgal biomass is of high importance because in this way, the viability of biofuel production by this microorganism can be increased.

This study includes the synthesis of a new natural plasticizer obtained through esterification reaction of rice fatty acid and polyols, its physicochemical characterization and its preliminary application in polyvinyl chloride (PVC). Monopropylene glycol, octanol and diethylene glycol were used as polyols for esterification reaction. Catalyst Fascat® 4100, was also added. Viscosity, acidity and hydroxyl index, moisture content, molar mass, chemical composition (by FTIR) and color were determined to characterize the natural plasticizer synthesized. The results were compared with a commercial plasticizer (DOA: di-octyl adipate) derived from petrochemical source and synthesized in laboratory. According to the results, except from color, the natural plasticizer presented similar properties of commercially available plasticizers, such as DOA. Mechanical tests indicated that the addition of the natural plasticizer to PVC films resulted in a significant increase on its elongation at break (371.2%) compared to pure PVC film, indicating a possible application for this plasticizer.

This work aimed to evaluate the effect of sugar cane molasses and glycerol on glutathione (GSH) fermentation by Saccharomyces cerevisiae ATCC 7754 in flask culture using response surface methodology. Under optimized conditions (80 g/L of molasses and 60 g/L of glycerol), the highest GSH and biomass concentration achieved were 119.6 mg/L and 25.3 g/L, respectively. Further studies done in 5 L bioreactor resulted 241.3 mg/L GSH after 96 h in batch fermentation without amino acids addition and the concentration of biomass was 12.1 g/L. In batch fermentation with the addition of the three amino acids (4 mM cysteine, glycine and glutamic acid at 32 h), biomass reached to 25 g/L and GSH, 236.1 mg/L at 96 h of fermentation. The strategy of precursor amino acids addition is a key aspect in increasing the synthesis of GSH.

The objective of this work was to study the production of GSH by Saccharomyces cerevisiae ATCC 7754 in a fermentor (5 L) using a cell recycle system with magnets. The fermentation conditions were 20°C, 500 rpm, 5% (v/v) of inoculum, pHinitial 5, 1.1 vvm aeration and total fermentation time of 72 h. The time of application of MF ranged from 24, 48 or 72 h. In comparison to the control experiment, the best results were obtained with 72 h of application of MF. The cell concentration reached 19.5 g/L and GSH concentration was 271.9 mg/L that corresponded to an increase of 2.63 and 32.1% compared to the control experiment, respectively.