In this work, alkaline and nickel-metal hydride spent batteries were used as precursors of metals for the synthesis of polymetallic materials. These materials were synthesized via chemical reduction. Materials produced from nickel-metal hydride spent batteries (PM-NiMH) have a nanometric size, whereas the alkaline spent batteries (PM-Alk) have a micrometric size. PM-NiMH consists mainly of Ni, Co, and Cu and the PM-Alk consists mainly of Mn and Zn. The surface areas of PM-NiMH and PM-Alk were 82 m2g-1 and 109 m2 g-1, respectively. The synthesized materials were applied in the removal of reactive blue dye 4 (RB4). Parameters such as initial pH of the system, dose of the materials, and initial concentration of the dye were optimized. For both materials, the removal capacity of RB4 was constant over a wide pH range of (4-10). The removal capacity increases with the decrease of the materials dose and increase of the dye concentration until saturation of the active sites. The RB4 removal by PM-NiMH occurs by adsorption and degradation processes, whereas PM-Alk occurs only by adsorptive processes. The RB4 removal process follows the Langmuir adsorption isotherm model with maximum removal capacities of 331 and 127 mg g-1 for PM-NiMH and PM-Alk, respectively.

The restricted availability of water sources suitable for consumption and high costs for obtaining potable water has caused an increase of the conscience concerning the use. Thus, there is a high demand for "environmentally safe methods" which are according to the principles of Green Chemistry. Moreover, these methods should be able to provide reliable results for the analysis of water quality for various pollutants, such as phenol. In this work, greener alternatives for sample preparation for phenol determination in aqueous matrices are presented, which include: liquid phase microextraction, solid phase microextraction, flow analysis, cloud point extraction and aqueous two-phase systems.