The high Si and Al contents in the amorphous phase of coal fly ash have been used for its conversion into zeolites. This process converts a toxic low-value by-product into a product used in a number of environmental applications, but has the disadvantage of introducing contaminants. Despite the large number of studies on the conversion of fly ash into zeolites, few report this drawback or discuss the efficiency of the proposed processes from a technical or ecological perspective. In this respect, the present study conducts a detailed assessment of two routes for integrated hydrothermal synthesis of zeolites 4A and Na-P1 obtained from coal fly ash. The processes are evaluated and compared in relation to the presence of undesirable metals and elements in the different steps of synthesis, as well as the feedstock and final product. Different performance parameters are presented and applied in the assessment of both processes and the most sustainable is recommended.

The species and density of Eucalyptus wood poles installed in the electrical network are useful parameters which must be considered when it is necessary to establish the service life of these structures. In this work, eucalyptus poles samples were collected and analyzed by scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS). SEM image analysis showed that the lumen diameter average of fiber substantially is variable between the three species studied, in line with the wood density obtained in laboratory, for poles with several years in service in the electricity network, as well as for not used poles. In addition, EDS microanalysis was utilized for identify the presence of chemical preservatives employed in the conservation these poles. The analysis method proposed proved effective for characterization for this timber.

Classification of waste wood treated with chromated copper arsenate (CCA) and boron/fluorine preservatives, according to NBR 10004, was investigated. The leaching test (ABNT NBR 10005) for As and Cr, and solubilization test (ABNT NBR 10006) for F, were applied to out-of-service wooden poles. Concentrations of As and Cr in leachates were determined by ICP-MS and of F by ESI. Values for As were higher than 1 mg L-1 classifying the waste as hazardous material (Class I) whereas values for F (> 1.5 mg L-1) were non-hazardous but indicated non-inert material (Class IIA).