Conductive polymers are versatile materials that can be applied in many different technology fields, especially green energy. They have several advantages, such as easy synthesis, low density, and cost. However, its electric conduction property is also related to material aging with great loss of their characteristics, limiting their applicability. The in-depth study of electrochemical aging can provide useful information for new strategies to overcome this problem. Thus, this work describes the use of factorial design to evaluate the influence of some synthesis variables on the aging of poly(3-hexylthiophene): electrolyte and monomer concentration and water in the synthesis of non-aqueous solution. For this, the properties of the films were evaluated by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The accelerated electrochemical aging was performed by applying a potential higher than the superoxidation potential for 20 min steps. It was possible to identify two extreme cases, the conventionally synthesized polymer aged more, while the polymer obtained with the three altered parameters suffered fewer aging effects. It was possible to identify a range of different aging pathways among these. The mechanical stress caused by the several oxidation/reduction cycles of the material aligned to the increasing loss of polymer properties, potentiates aging.

<p>This work reports the building of a low-cost experimental setup for high temporal resolution data acquisition. The setup is useful for different applications, especially for voltage data acquisition during electrochemical experiments. The proposed setup performed two hundred thousand measurements per second (5 µs time resolution) and revealed unknown curve characteristics during chronopotentiometry of the anodization of valve metals. This information can serve as a starting point for further investigations on the nature of voltage oscillations in the breakdown region during valve metal anodization.</p>

In this work, a detailed chemical route to prepare thermally stable polyaniline (PANI)/carbon black (CB) composites is described. The syntheses were performed by chemical polymerization of aniline over CB particles, using different PANI/CB mass ratios. The thermal and electrical properties were characterized. Composites with mass ratio up to 65:35 (PANI:CB) showed excellent thermal stability maintaining their conducting properties when thermally treated at 230 °C for two hours, which is adequate to process these materials. Moreover, the results showed an important reduction in the surface area of the composites which have a good relationship with the improvement of the rheological properties in melt processing.

In this technical note, we describe the construction of a low-cost computer controlled device for layer-by-layer film fabrication. The software allows to control multiple material deposition, washing and drying steps and the time for each operation. To test the device, we produced and characterized self-assembled films of conductive polymers by alternating poly(o-methoxyaniline) (POMA) and poly(3-thiophene acetic acid) (PTAA) via the layer-by-layer technique.