In the criminal sphere, it is extremely important to identify perpetrators of crimes based on latent fingerprints (invisible to the naked eye) revealed at crime scenes and their corresponding objects. The present work aimed to evaluate four synthetic analogues of curcumin as possible IDL developers, and to compare their results with those of carbon black developer, as well as to reach the most adequate parameters in the use of the LTQ and FT-ICR mass spectrometers with the paper spray ionization (PS) source to study the chemical composition of the endogenous substances contained in the IDL. For this, a 24-1 factorial design was developed, where it was verified that the distance and voltage factors were the most influential for the increase in the response of signals, in the analysis of latent fingerprints by PS. Among the detected substances we can mention around 20 fatty acids, and squalene. Finally, four potential developers, synthetic analogues of curcumin, were compared with carbon black developer. The revelation of latent fingerprints occurred efficiently, allowing the visualization of minutiae, such as bifurcation and end of line, making it possible to classify them, according to the Vucetich Fingerprint Classification System.

Natural formulations have attracted great interest of many researchers regarding their use as latent fingermark developers powders due their important characteristics as the presence of natural pigments in these materials that offer a good contrast on the applied surface and also luminescent properties, which facilitates the visualization of minutiae in problematic substrates such as multicolored surfaces. In addition, natural powders present low toxicity, are widely available and economically viable. In this sense, the present work addresses the application of several natural products to enhance fingermarks visualization. The natural products were obtained from various sources such as seaweed, spices as well as other sources such as terrestrial and herbaceous plants. The evaluated powders are composed by compounds as chlorophyll, phycocyanins, curcumins, lawsone, fatty acids, coumarins, flavonoids and terpenes. These powders showed good adhesion to latent fingermarks, with similar or superior efficiency to the available powders on different surfaces with clear visualization of the minutiae. The development of new powders applicable to papiloscopy are extremely important since the conventional available powders, besides being expensive, are imported and within the national context there is a great lack of these revealing materials within forensic investigations by the Federal Police and in laboratories of research.

The use of anabolic androgenic steroids is largely restricted worldwide since they are associated with innumerous side effects and health damage. However, apprehensions of formulations of anabolic agents have been extensively increasing throughout the world, making their analysis a common task in the forensic field. In this sense, a set of three experiments was developed and applied to undergraduate students of Forensic Chemistry dealing with visual inspection of apprehended formulations of anabolic androgenic steroids as well as chemical identification by Infrared Spectroscopy and Gas Chromatography-Mass Spectrometry. Moreover, the classroom evaluated the extraction of steroidal active ingredients by ultrasonic and microwave-assisted extraction. The experimental procedures allied with the theory behind these topics provided an important background to the students on distinct extraction methods and analytical techniques used in the analysis of anabolic agents. Finally, the classroom was led to critically evaluate and interpret the results as well as to question the adequacy of experimental methods used in forensic analysis to stimulate their critical thinking.

Fingerprints are unique to each individual, contributing to human identification in forensic cases. The powder technique being widely used is considered one of the most important in latent fingermarks analysis. In this sense, the present work aimed to synthesize 1-thiocarbamoyl-4,5-dihydro-1H-pyrazoles and apply them as powder agents to develop latent fingermarks. The compounds were prepared from an effective and green synthesis via the condensation of chalcones with thiosemicarbazide in ethanol under microwave irradiation. Pyrazoles were tested and compared with a standard white powder (Sirchie®) on glass surfaces using sebaceous and natural fingermarks so that molecule 2c has been shown to be more promising providing image clarity. The derivatives of pyrazoles were promising as an alternative latent fingermark, presenting high quality images for fingermarks, proving to be a great tool for forensic sciences.

This work aims the synthesis of amidino pyrazolines by the cyclocondensation reaction between 3-(hetero)aryl-1-(2-hydroxyphenyl)enones and aminoguanidine hydrochloride under sonochemical conditions. Thirteen new compounds were synthesized in 15-83% of yield after sonication for 30 min without purification by chromatography. Furthermore, antimicrobial activities of the synthesized compounds were investigated by in vitro minimum inhibitory concentration (MIC) in a panel of four bacterial strains and four Candida yeasts. As result, the 5-(4-bromophenyl)-3-(2-hydroxyphenyl)-4,5-dihydro-1H-pyrazole-1-carboximidamide hydrochloride was identified as the most active against gram-positive S. aureus and E. faecalis with MIC of 7.8 µg mL−1, similar to the value showed by chloramphenicol, which was used as standard.

The development of fingermarks is an important step in criminal cases. Latent fingermarks require applications of reagents to be developed before they can be visualized. Different techniques to enhance fingermarks’ visualization have been employed and the powder dusting is the most common among them. The use of food spices as latent fingermarks developers could be an alternative method of experiment in chemistry teaching, considering that they are low cost and accessible. In this work, an experimental methodology was developed and can be applied in undergraduate chemistry teaching for the extraction of components from food spices, their chromatographic analysis and application on the development of latent fingermarks.

Fingerprints are unique for each individual contributing to human identification in forensic cases. Visualization of latent fingerprints usually involves the use of a chemical substance that creates a contrast between fingerprint residues and the surface on which the print was deposited. Commercial powders used as fingerprint developers by papilloscopy have relatively high costs due to their importation and chemical composition. (E-1,3-diphenylprop-2-en-1-one, E-1-phenyl-3-(4-methylphenyl))prop-2-en-1-one but only one compound was highlighted, E-3-(3-nitrophenyl)-1-phenylprop-2-em-1-one). The composite was selected for its suitable properties (adhesion and texture) of visualization of the digital, providing the obtaining of clear revelations with identification of minutiae and singular points of the fingerprints. Identification, magnetic resonance, granulometry and contact surface evaluation with chalcones such as sebaceous and natural deposition with development in different materials such as plastic, metal and glass were applied for the application of fingerprint development. The compound was tested in eight volunteers regardless of gender and age, presenting satisfactory results for fingerprint development on glass and metal surfaces.

3-(Thiophen-2-yl)-4,5-dihydro-1H-pyrazole-1-carboximidamides were efficiently prepared through a cyclocondensation of thiophenylchalcones with aminoguanidine hydrochloride under ultrasonic conditions in the presence of KOH and ethanol as a green solvent in short reaction times (15-35 min) and good yields (62-95%). All compounds produced were evaluated against the human Jurkat and RS4;11 acute lymphoblastic leukemia cell lines of T- and B-cell origin, respectively, and the K562 myelogenous leukemia cell line. Six compounds presented half maximal inhibitory concentration (IC50) values around 15 µmol L-1 and five compounds presented IC50 values around 40 µmol L-1 for at least one of the three cell lines analyzed. One compound was not significantly cytotoxic, presenting IC50 value > 100 µmol L-1.

RESUMO O caruncho-do-feijão e o gorgulho do milho podem causar grandes prejuízos aos grãos armazenados. Entre as alternativas de controle está a utilização de óleos essenciais de plantas com propriedades inseticidas; objetivou-se, assim, avaliar a eficiência do óleo essencial de cravo-da-índia no controle de S. zeamais e A. obtectus em condições de laboratório. O óleo essencial foi extraído por processo clássico de hidrodestilação e seus constituintes químicos foram identificados por cromatografia gasosa. A eficiência deste óleo foi testada nas doses 35; 17,9; 8,9; 3,6; 1,8; 0,4 e 0,2 μL g-1 (oriundas de um trabalho piloto) no controle dos insetos e determinada a CL50. Os resultados mostraram que o eugenol foi o composto majoritário. O óleo essencial causou 100% de mortalidade para as duas espécies 48 h após o tratamento com as concentrações de 17,9 e 35 μL g-1. A CL50 para A. obtectus foi 9,45 μL g-1 contra 10,15 μL g-1 do S. zeamais. A utilização do óleo essencial de cravo-da-índia representa uma alternativa promissora a ser usada em condições de armazenagem para o manejo integrado de pragas de grãos armazenados.

ABSTRACT Bean weevil and maize weevil can cause considerable damage to stored grains. These insects are mainly controlled with synthetic chemical insecticides, which may bring serious problems to human and environmental health. Therefore, this study aimed to evaluate the efficiency of the essential oil of clove [Syzygium aromaticum (L.) Merrill & Perry (Myrtaceae) (origin: Bahia, season Sep.2014-Feb.2015)] in the control of S. zeamais and A. obtectus under laboratory conditions. The essential oil was extracted through the classic hydrodistillation process and its chemical components were identified via gas chromatography. Oil efficiency was tested at the doses of 35, 17.9, 8.9, 3.6, 1.8, 0.4 and 0.2 μL g-1 (derived from a pilot study) for insect control and the LC50 was determined. The results showed that eugenol was the major compound. The essential oil caused mortality of 100% for both species 48 h after treatment with the concentrations of 17.9 and 35 μL g-1. The LC50 for A. obtectus was 9.45 μL g-1, against 10.15 μL g-1 for S. zeamais. The use of clove essential oil represents a promising alternative to be used under storage conditions for the integrated management of stored grains pests.

A series of twelve novel 2-(pyrazol-1-yl)pyrimidine derivatives was easily obtained under ultrasonic conditions by the cyclocondensation reaction of 1-carboxamidino-pyrazoles with 4-methoxyvinyl-trifluoromethyl ketones using ethanol as an environment-friendly solvent in the presence of potassium hydroxide. Comparison of the ultrasound-promoted reaction with classical methodology shows that the former is faster and gives better yield. The products were isolated in excellent purity grades without purification by chromatography or recrystalization.

A green method was developed for the synthesis of chalcones using glycerin as solvent. Subsequently, the potential microbiology activity of these molecules was evaluated by testing them against the Gram-positive bacteria Staphylococcus aureus (S. aureus) ATCC 19095 and Enterococcus faecalis (E. faecalis) ATCC 4083, the Gram-negative bacteria Escherichia coli (E. coli) ATCC 29214 and Pseudomonas aeruginosa (P. aeruginosa) ATCC 9027, and the fungus Candida albicans (C. albicans), which includes ATCC 62342 and three clinical strains of C. albicans from human oral cavities. The results showed that some chalcones exhibited moderate inhibitory activity, the most prominent being those acting against the fluconazole-resistant strains of C. albicans.

The discovery of ferrocene marked one of the points of departure for modern organometallic chemistry. In general, the compounds of ferrocene derivatives are widely applied in several areas. One of the most important applications of ferrocene is the development of more active drugs, especially in cases where there is resistance to current drugs. Bioactive agents containing ferrocene have proven effective in combating diseases such as cancer, malaria, HIV, Alzheimer and conditions caused by fungi and bacteria. In this context, the present paper aims to highlights the synthesis of heterocycles containing ferrocene moiety and their use in medicinal chemistry.

Currently, algae and algae products are extensively applied in the pharmaceutical, cosmetic and food industries. Algae are the main organisms that take up and store heavy metals. Therefore, the use of compounds derived from algae by the pharmaceutical industry should be closely monitored for possible contamination. The pollution generated by heavy metals released by industrial and domestic sources causes serious changes in the aquatic ecosystem, resulting in a loss of biological diversity and a magnification and bioaccumulation of toxic agents in the food chain. Since algae are at the bottom of the aquatic food chain, they are the most important vector for transfer of pollution to upper levels of the trophic chain in aquatic environments. Moreover, microalgae are also used for the bioremediation of wastewater, a process that does not produce secondary pollution, that enables efficient recycling of nutrients and that generates biomass useful for the production of bioactive compounds and biofuel.

Microalgae are a promising source of raw material for biodiesel production. This review discusses the latest developments related to the application of microalgae biomass for biodiesel production. Characterization of fatty acid of microalgae and comparisons with other sources of raw materials and processes are presented. Furthermore, technological perspectives and approaches for growing microalgae in photobioreactors, microalgal oil extraction techniques, and procedures for synthesizing biodiesel are reviewed.

In this work we described the cultivation of Chlorella vulgaris in a photobioreactor to algal biomass production. The dried biomass was used as feedstock for biodiesel production, it presented 26% lipids and via sonocatalysis stage of the methodology resulted in 60% of fatty acid methyl esters (FAME). The FAME content was confirmed by Gas Chromatography (GC).