Fullerene is considered to be the third carbon allotrope after diamond and graphite. The study of fullerene derivatives has been growing due to their exceptional electron affinity. This work proposes th study of three different fullerene derivatives, being phenyl-C61-butyric acid methyl ester (PCBM), oligo {(phenyl-C61-butyric acid methyl ester)-alt-[1,4-bis(bromomethyl)-2,5-bis(octyloxy)benzene]} (OPCBMMB) and poly {[bispyrrolidino(phenyl-C61-butyric acid methyl ester)]-alt-[2,5-bis(octyloxy)benzene]} (PPCBMB), and their application as NH3 sensors. Experimental results showed that these materials have a reproducible response to NH3, with PCBM resulting in the highest observed current peak, followed by OPCBMMB and PPCBMB. These results imply that PCBM, OPCBMMB and PPCBMB can be used to produce NH3 sensors.

In this paper, devices fabricated with a diode-like structure (electrode/polymer/electrode) from spin-coated and nanostructured (Langmuir-Schaefer) films of polythiophene derivatives were characterized by impedance spectroscopy and studied by theoretical fitting to reach a better understanding of the physical processes in the devices. The materials used for this research were the polyalkylthiophene (P3AT) derivatives poly(3-butylthiophene) (P3BT), poly(3-hexylthiophene) (P3HT), poly(3-octylthiophene) (P3OT) and poly(3-decylthiophene) (P3DT). Electrical measurements were performed from 1 Hz to 1 MHz (100 mV ac) while increasing the dc bias in the range from 0 to 2.5 V. The fittings of the experimental results were performed using equivalent circuits. By plotting the theoretical and experimental spectra on a single graph, it was possible to obtain information related to the film morphology, interfacial effects, resistance, capacitance and conductivity of the polymer, thereby enhancing the understanding of this particular type of device. Among the P3AT films, those grown by the Langmuir-Schaefer technique showed higher electrical conductivity, with the only exception being that of P3BT.

A study is reported on Langmuir and Langmuir-Blodgett (LB) films obtained by adding different percentages of stearic acid (SA) to poly(3-octylhiophene) (P3OT). Surface pressure - mean molecular area (π - A) isotherms, ultraviolet-visible (UV-Vis) absorption spectrum, atomic force microscope (AFM) and dc electrical measurements have been used for characterization. From π - A isotherms, the area per monomer for condensed films (of SA) increased according to P3OT amount. Good transfer ratios were obtained for LB deposition from P3OT/SA films with higher percentage of SA. LB films revealed linear growth as monitored by UV-Vis absorption spectra. Electrical characterization showed higher conductivity for LB film with 54 wt.% of SA. AFM images of the same film revealed high roughness and presence of large size agglomerates. Finally, interdigitated electrodes (IDE) coated with P3OT/SA LB films showed to be sensitive to the presence of volatile organic compounds.