RESUMO Considerando as tecnologias relacionadas aos revestimentos de paredes nas edificações, releva-se a importância de preparo da base chapisco. Entretanto, não se pode desconsiderar a importância das demais camadas do sistema de revestimentos de argamassas na resistência de aderência à tração, com maior ênfase nos casos das fachadas. A aderência relaciona-se basicamente à técnica executiva empregada e aos materiais utilizados, destacando o teor de cimento e água adicionada no traço, tendo em vista que a penetração da água coloidal nos poros da base, propicia a microancoragem (travamento mecânico de cristais de sulfoaluminato de cálcio hidratado ou etringita e silicato de cálcio hidratado, conforme princípio dos poros ativos) que governa à aderência. Podem-se destacar alguns benefícios do chapisco na aderência dos revestimentos: (i) resistência ao cisalhamento, função da rugosidade (macroancoragem); (ii) uniformização da absorção; (iii) parte da barreira física do sistema de revestimento da fachada. Essa pesquisa objetivou verificar a influência da adição de cal em relação a massa de cimento, no chapisco e no sistema chapisco mais reboco, nos teores (0%, 5%, 10% e 15%) em paredes com blocos cerâmicos e de concreto. Os resultados obtidos indicaram a importante contribuição da adição de cal como incremento da resistência de aderência à tração de revestimentos argamassados[1].
ABSTRACT Considering the technologies related to wall coverings in buildings, the importance of preparing the base roughcast is important. However, the importance of the other layers of the mortar coating system cannot be disregarded in the tensile strength, with more emphasis on the cases on the facades. Adherence is basically related to the executive technique employed and the materials, highlighting the cement and water content added in the trace, considering that the penetration of colloidal water in the pores of the base, providing microancorating (mechanical locking of sulfo-aluminate crystals of hydrated calcium or ethringtite and hydrated calcium silicate, according to the principle of the pores active) and governs in bond. It can be highlighted some benefits of roughcast on the adhesion of coatings: (i) shear resistence of the, function of Roughness (macroarmage); (ii) uniformity of coating absorption; (iii) part of the physical barrier of the façade cladding system. This research aimed to verify the influence of pure lime addition in relation to cement mass, roughcast and roughcast more plaster system, on the contents (0%, 5%, 10% and 15%) on walls with ceramic and concrete blocks. The results indicated the importance of adding lime as an increase in tensile bond strength of mortar coatings [1].