Abstract The main purpose of this paper is introducing a new method based on the transmission line approach for designing FSS-backed reflecarray antennas. For this reason a dual band reflectarray antenna is designed. This antenna contains a conventional single layer RA and a FSS backed double layer RA with 54% and 50% efficiency operating at X band and K band, respectively. A double layer FSS is used between RAs to isolate them. K band cell element is designed and analyzed using transmission line method and consideration of equivalent circuit for elements of each layer. Then the results obtained using this technique is compared to those found by CST and ADS. The comparison shows a good agreement. Jerusalem cross dipole with variable size is employed as radiation element in both bands. The most important properties of our suggested array are low cross polarization and high efficiency.

Abstract A novel FSS-Backed reflectarray unit cell is introduced to design a dual-band X/Ku Reflectarray Antenna (RA). A Ku-band RA based on this FSS-Backed cell element is designed and located on the top of a conventional X-band RA. Actually, the band-stop Frequency Selective Surface (FSS) property is applied to a wideband element to create isolation between X and Ku band RAs which utilizing the same radiating element. A wideband cell element with attached quasi-spiral phase delay line is employed for phase compensation in both bands. As a FSS-backed cell element, the remarkable feature of the proposed dual band unit cell compared to previous works is its possibility of operation in closer frequency bands in comparison with other dual band FSS-backed RAs. Two reflectarrays with aperture size of 7.65λ×7.65λ and 7.35λ×7.35λ are designed, fabricated and measured for X band and Ku band, respectively. Measured results show 1-dB gain bandwidth of 12% for X band and 11% for Ku band which demonstrate wideband operation of this dual-band reflectarray antenna.