Resumo Estudos realizados com o pó de forno elétrico a arco (PAE) indicam um retardo no tempo de hidratação do cimento Portland. A incorporação de resíduos ricos em cálcio, como a lama de carbonato de cálcio (LCC), é uma das formas de redução deste retardo, a fim de suprimir a deficiência deste elemento para a produção de C-S-H. Este estudo teve como objetivo avaliar a influência do uso do PAE, combinado ou não com o LCC no processo de hidratação de pastas de cimento em relação ao tempo de pega e calor de hidratação. A metodologia utilizada envolve a caracterização física, química e microestrutural das amostras de resíduos, a formulação e produção de pastas de cimento com diferentes teores de substituição de resíduos e sem substituição (amostra de referência) e a avaliação das propriedades das pastas de cimento em relação ao tempo de pega e à evolução do calor de hidratação. Os resultados mostraram que a substituição de 1% de PAE combinado ou não com LCC apresentaram um calor de hidratação semelhante à amostra referência, sugerindo que nessa quantidade, a incorporação de PAE+LCC não afetaria significativamente as reações de hidratação do cimento, possibilitando a reciclagem destes resíduos em materiais de construção.

Abstract Studies have indicated that the use of electric arc furnace dust (EAFD) results in a delay in the hydration time of Portland cement. Calcium-rich waste such as lime kiln waste (LKW) is one of the techniques used to offset this delay as it accounts for the lack of this element in calcium silicate hydrate (C-S-H) production in the mixture. The objective of this study was to evaluate the influence of electric arc furnace dust (EAFD) and lime kiln waste (LKW) in the hydration process of Portland cement pastes and their influence in setting time and hydration heat. The methodology used required several steps: physiochemical and micro-structural characterization of waste samples; definition and production cement pastes with different levels of waste substitution and a reference paste and evaluation of the cement pastes with respect to setting time and hydration heat. Results showed that the substitution of 1% EAFD with or without LKW presented similar hydration heats as the reference paste. This indicated that EAFD+LKW substitution would not affect substantially the hydration reactions of cement and could allow waste recycling in construction materials.

Abstract The clay minerals have characteristics and properties that allow their applicability in the cosmetic area, being incorporated into formulations as an active principle. Therefore, the aim of this work is characterizing and evaluating the influence of a clay from Miracema do Norte, Tocantins, Brazil, named Clay V, on the physicochemical characteristics of a hydrophilic gel of Aristoflex®, a copolymer of the neutralized acryloyldimethyltaurate and vinylpyrrolidone sulphonic acid. Clay V was decontaminated and characterized through microbiological evaluation, crystalline phases present by X-Ray Diffraction (XRD), chemical composition by X-Ray Fluorescence (XRF), thermogravimetric analysis (TGA) and granulometric distribution by sieving. Gels were prepared using Clay V with particles in the range ≤ 180 μm in three different concentrations: 1%, 3% and 5% (w/w) and a standard gel without clay. The formulations were evaluated according to organoleptic characteristics, pH, viscosity, spreadability and the centrifugation test. The microbiological evaluation showed that the clay sample is in compliance with the parameters established by the legislation. The following mineral phases were identified by XRD: kaolinite, illite, vermiculite and quartz, mainly composed of silica and alumina according to XRF. Thermal analysis showed that the clay has two thermal decomposition reactions, the largest being 547.6°C. The granulometric analysis identified that the largest fraction (63.22%) was of particles with sizes greater than 710 μm. The organoleptic characteristics presented by the formulations were suitable, with characteristic gel odor, homogeneous appearance, soft and refreshing texture and staining based on the concentration of Clay V used. The obtained pH values were within the range between 5.5 and 6.5, and it was verified that the gel has high spreadability, distributing evenly on the skin. The values obtained for viscosity showed that the formulations are non-Newtonian fluids with pseudoplastic behavior. The centrifugation test showed that the formulations are stable, with no phase separation. The results obtained with the tests showed that the natural clay V material is beneficial in cosmetic products and can be used for incorporation in cosmetic gel formulations of Aristoflex® type.

This study aims to evaluate the influence of pro-oxidant additive and accelerated aging on the degradation of polyethylene (PE) samples in simulated soil, in accordance with ASTM G160-03. Films of polyethylene with and without pro-oxidant additive were studied, before and after 72 hours of accelerated aging. The films were initially characterized by analyses of Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) (to evaluate the Carbonyl Index (CI)). The films were exposed for 30, 60 and 90 days in simulated soil, with controlled moisture and soil pH. The results showed the degradation of polyethylene films through an increase of CI in samples with additive and accelerated aging after 30 days of exposure, and a decrease, after 60 and 90 days, indicating the uptake of material oxidation by-products by microorganisms. The polyethylene films without pro-oxidant additive after accelerated aging showed greater structural and surface modifications, as compared to films with the additive.