Abstract Orally disintegrating films (ODFs) were prepared from hydroxypropyl methylcellulose (HPMC E6 1.5%, 2.0%, and 2.5%), plasticizers ((glycerin (Gly), propylene glycol (PP), or polyethylene glycol (PEG)), and isosorbide dinitrate using the solvent casting method. Design of experiments (DoE) was used considering the amount of film-forming agent (HPMC) and the nature of the plasticizers as independent variables and thickness, mechanical properties, disintegration time, and dissolution efficiency as dependent variables. The best formulation was selected based on the desirability function ( f D). Color analysis was performed using CIE- L a b coordinates. DSC curves and XRPD diffractograms showed ISDN amorphization, probably due to complexation with polymers (HPMC E6 and HPβCD). The polymer (HPMC E6) and plasticizer played a critical role in the mechanical and optical properties of the films; however, these factors had no significant effect on the dissolution efficiency of ISDN. Principal component analysis revealed a more defined distinction of the ODFs according to their chromatic characteristics. ODFs prepared with Gly and PEG 400 were translucent, whereas the other films were transparent. The dissolution efficiency values of the ODFs (F1-9) were higher than those observed for the reference product (88.35(0.01%), indicating increased solubility of ISDN, probably due to complexation with polymers (HPMC E6 and HPβCD). The maximum value obtained for desirability function ( f D ) was 0.86, which corresponded to the use of 1.5% to 2.0% polymer (HPMC E6) and Gly or PP as plasticizers. The F5 formulation showed adequate thickness (85.00(6.38 (m), elongation at break (4.82(0.01%), adhesiveness (0.23(0.09 mJ), dissolution efficiency (95.97(0.01%), and high transparency.

Abstract In this study, orodispersible films formed from hydroxypropyl methylcellulose (HPMC) E6 (2, 2.5, and 3%) and plasticizers ((glycerin (Gly), propylene glycol (PP), or polyethylene glycol (PEG)), containing doxazosin mesylate, were prepared by the solvent casting method and characterized. Design of experiments (DoE) was used as a statistical tool to facilitate the interpretation of the experimental data and allow the identification of optimal levels of factors for maximum formulation performance. Differential scanning calorimetry (DSC) curves and X-ray powder diffraction (XRPD) diffractograms showed doxazosin mesylate amorphization, probably due to complexation with the polymer (HPMC E6), and the glass transition temperature of the polymer was reduced by adding a plasticizer. Fourier transformed infrared (FTIR) spectroscopy results showed that the chemical structure of doxazosin mesylate was preserved when introduced into the polymer matrix, and the plasticizers, glycerin and PEG, affected the polymer matrix with high intensity. The addition of plasticizers increased the elongation at break and adhesiveness (Gly > PEG > PP), confirming the greater plasticizer effect of Gly observed in DSC and FTIR studies. Greater transparency was observed for the orodispersible films prepared using PP. The addition of citric acid as a pH modifier was fundamental for the release of doxazosin mesylate, and the desirability formulation had a release profile similar to that of the reference product.

Abstract In this study, we investigated the influence of the olfactive stimulus on visual attention. Two groups of 30 subjects participated in two experiments. Both experiments presented two arrays of fruits stimulus intercalated by an olfactive intervention. The stimulus was received in the form of images by the first group and in the form of words by the second group. An eye-tracking device monitored the timekeeping of visual attention dispensed in each stimulus. The results showed that olfactive priming influenced visual attention in both cases but with a greater degree in the images stimulus group. This study shows for the first time that image information is more susceptible to priming olfactive information than wording information. This effect may be associated with the formation of mental images in working memory, aroused by fragrances.

Urea’s thermal instability and burning on sensitive skin can cause problems for cosmetic formulations. To overcome these drawbacks, urea was incorporated into ordered mesoporous silica (SBA-15). SBA-15 was synthesized using tetraethyl orthosilicate and Pluronic® P123 in an acid medium. Urea (20 wt.%) was incorporated into calcined SBA-15 by the incipient wetness impregnation method. Several techniques were used to characterize the samples. Skin hydration and transepidermal water loss were measured using Corneometer® CM 825 PC and Tewameter® 300 TM. Results showed that the structural properties of SBA-15Urea were similar to pure SBA-15, indicating that SBA-15 remained structured even after urea incorporation. Nitrogen physisorption data showed the volume and surface area of the pores in SBA-15Urea were much lower than those in SBA-15, demonstrating that urea was deposited inside the mesopores. In vivo moisturization studies revealed that SBA-15Urea was not able to reduce transepidermal water loss compared to the other products and control, while forming a non-occlusive surface film on the skin. We conclude that incorporation of urea in the pores of the inorganic SBA-15 matrix is a promising approach to enhancing its stability and providing a prolonged moisturizing effect.

ABSTRACT The search for new pharmaceutical dosage forms and different drug delivery systems already used in therapeutics is a global trend, serving as an opportunity to expand the portfolio for the pharmaceutical industry. In this context, multiparticulate systems, such as pellets, granules, and minitablets, represent an attractive alternative, given the range of possibilities they provide. Among the methods used in the production of these systems, we highlight the process of extrusion-spheronization for pellet manufacture, wet granulation and hot-melt extrusion for the obtention of granules, and direct compression for minitablets. Although highly versatile, depending on the technology chosen, many processes and formulation variables can influence the ensuing stages of manufacture, as well as the final product. Therefore, the characterization of these small units is of fundamental importance for achieving batch homogeneity and optimal product performance. Analyses, including particle size distribution, morphology, density, porosity, mechanical strength and disintegration, are example tests used in this characterization. The objective of this review was to address the most widely used tests for the physical evaluation of multiparticulate systems.

<p>USP aparato 3 (cilindros recíprocos) é um equipamento bastante versátil para a avaliação das características de liberação <italic>in vitro</italic> de formas farmacêuticas sólidas orais, pois permite que o produto seja submetido a diferentes meios de dissolução e condições de agitação, em um único ensaio. Neste trabalho, são apresentados um breve histórico e a descrição desse sistema, suas aplicações no desenvolvimento de produtos de liberação imediata e modificada, assim como sua utilização na simulação dos estados não alimentado e alimentado com o emprego de meios biorrelevantes. Além disso, uma comparação é estabelecida com o cesto e a pá, com destaque para a hidrodinâmica superior do USP aparato 3, que faz com que os resultados não sejam influenciados por fatores como o uso de sondas de coleta de amostras ou presença de bolhas de ar no meio de dissolução.</p>

<p>USP Apparatus 3 (reciprocating cylinder) is a very versatile device for the <italic>in vitro</italic> assessment of release characteristics of solid oral dosage forms, because it enables the product to be subjected to different dissolution media and agitation speeds in a single run. In this paper, a brief history and a description of this system are presented, along with its applications in the development of immediate and modified release products and in the simulation of fasted and fed states using biorelevant media. Furthermore, a comparison is made with the basket and paddle apparatus, especially highlighting the superior hydrodynamics of USP apparatus 3, since the results are not sensitive to factors such as the presence of sample collection probes or air bubbles in the dissolution medium.</p>

In this study, fluid bed granulation was applied to improve the dissolution of nimodipine and spironolactone, two very poorly water-soluble drugs. Granules were obtained with different amounts of sodium dodecyl sulfate and croscarmellose sodium and then compressed into tablets. The dissolution behavior of the tablets was studied by comparing their dissolution profiles and dissolution efficiency with those obtained from physical mixtures of the drug and excipients subjected to similar conditions. Statistical analysis of the results demonstrated that the fluid bed granulation process improves the dissolution efficiency of both nimodipine and spironolactone tablets. The addition of either the surfactant or the disintegrant employed in the study proved to have a lower impact on this improvement in dissolution than the fluid bed granulation process.