Os Fios Diamantados são ferramentas de corte aplicadas ao desmonte de rochas ornamentais, bem como a cortes de blocos de concreto, e podem ser utilizadas em substituição a serras em geral. Estas ferramentas são compostas de um fio alma (aço inoxidável), sobre o qual são dispostos segmentos anulares diamantados (pérolas diamantadas) igualmente espaçadas. Em geral, as pérolas de fios diamantados são processadas através das técnicas da Metalurgia do Pó, onde se produz compósitos tendo como partícula abrasiva o diamante, e normalmente um ligante metálico para aderir os diamantes. As pérolas diamantadas do presente trabalho foram produzidas via Metalurgia do Pó convencional, utilizando como matriz metálica ligante uma liga de Fe-20%pCu, com adição de 1% em peso de SiC. Foram feitas análises de retração/inchaço e microestrutural após a sinterização, testes de dureza Brinell, e foram medidas as resistências ao desgaste das pérolas aqui produzidas em confronto com as pérolas comerciais importadas. Os resultados mostram que conseguiu-se processar pérolas de mesmo desempenho das pérolas comerciais importadas.
Diamond wires are cutting tools used in the slabbing of ornamental stones, such as marbles and granites, as well as in the cutting of concrete structures. This kind of tool consists of an AISI 316 stainless cable on which annular diamond segments (beads) are set up with a regular gap between them. Normally, diamond wire beads are processed following Powder Metallurgy techniques (MP), which enables the processing of composites with metal matrix diamond embbedded. The beads of the present work, had been produced by conventional Powder Metallurgy, using Fe-20wt%Cu alloy with addition of 1wt% of SiC as the matrix metallic bond. It was carried out shrinkage/swelling and microstructural analyses after sintering, Brinell hardness measurements, as well as the abrasion resistance of beads produced here in confrontation with that imported ones. The results indicate that it was achieved, besides generating technology in terms of diamond tools manufacture, to process beads with similar abrasion resistance and performance than those of the commercial diamond beads, what suggests a reduction in the production cost and it proves to be possible the nationalization of such technology.