Utilizouse a metodologia solgel para obtenção de uma matriz de sílica modificada com íons de cálcio e fosfato. Preparouse a matriz, por hidrólise e condensação dos precursores trietil fosfato, nitrato de cálcio, e tetraetilortosilicato, que foram as fontes de fosfato, de cálcio, e de silício, respectivamente. As amostras foram secas e tratadas termicamente a 110 e 900°C e colocadas em contato com fluido corporal simulado (SBF) por três dias. Realizouse microscopia eletrônica de varredura, difração de raios X, espectroscopia na região do infravermelho, o que evidenciou que a amostra tratada a 110°C continha silicato de cálcio, fosfato e hidroxiapatita, antes e após o contato com SBF, respectivamente. A amostra tratada a 900°C exibiu a fase hidroxiapatita, antes e após o contato com SBF, mas a fase cristalina foi mais evidente após o contato. Em conclusão, o método de solgel forneceu amostras bioativas para regeneração óssea.

We employed the solgel methodology to obtain a silica matrix modified with calcium and phosphate ions. We prepared the matrix by hydrolysis and condensation of the precursors triethyl phosphate, calcium nitrate, and tetraethylorthosilicate, which were the sources of phosphate, calcium, and silicon, respectively. We dried and heattreated the samples at 110 or 900°C and placed them in simulated body fluid (SBF) for three days. We conducted scanning electron microscopy, Xray diffraction, and infrared spectroscopy analyses, which evidenced that the sample treated at 110°C contained calcium phosphate silicate and hydroxyapatite before and after contact with SBF, respectively. The sample treated at 900°C exhibited a hydroxyapatite phase before and after contact with SBF, but the crystalline phase was more evident after the contact. In conclusion, the solgel methodology provided bioactive samples for bone regeneration.

Um novo material a base de poliamida revestida com fosfato de cálcio foi desenvolvido visando potencial aplicação como biomaterial. O revestimento foi obtido pelo método sol-gel e o fosfato de cálcio foi obtido após contato com solução de fluído corpóreo. A poliamida revestida (antes e depois de contado com fluído corpóreo) foi caracterizada através de análises termogravimétrica e térmica diferencial (TGA/DTA), calorimetria diferencial de varredura (DSC), microscopia eletrônica de varredura (SEM) e espectrometria de reflexão total atenuada no infravermelho com transformada de Fourier (ATR-FTIR). As caracterizações revelaram a formação de fosfato de cálcio com uma espessura menor que 3 µm, o que proporcionou um aumento no ponto de fusão além de melhorar a estabilidade térmica da poliamida. Após contato com o fluído corpóreo, as interações entre o revestimento e o substrato se mantiveram, e houve formação de fosfatos cristalinos e amorfos na superfície de poliamida.

A new type of material from polyamide coated with calcium phosphate was developed aiming to have potential application as biomaterial. Coating was obtained by the sol-gel method and calcium phosphate was obtained after contact with body fluid solution. The coated polyamide (before and after contact with body fluid solution) was characterized by thermogravimetric and differential thermal (TGA/DTA) analyses, differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). These characterizations revealed that the calcium phosphate coating has a thickness of less than 3 µm, which resulted in an increase in the melting point and improved the thermal stability of polyamide. After contact with body fluid, the interactions between the coating and the substrate remained, and there was formation of crystalline and amorphous phosphates on polyamide surface.

Indium tin oxide nanoparticles were synthesized in two different sizes by a nonhydrolytic sol-gel method. These powders were then transformed into ITO via an intermediate metastable state at between 300 and 600 ºC. The presence of characteristic O-In-O and O-Sn-O bands at 480 and 670 cm-1 confirmed the formation of ITO. The X-ray diffraction patterns indicated the preferential formation of metastable hexagonal phase ITO (corundum type) as opposed to cubic phase ITO when the reflux time was less than 3 h and the heat treatment temperature was below 600 ºC. Particle morphology and crystal size were examined by scanning electron microscopy.

This work aimed at the synthesis and characterization of particles of modified silica containing the organic filter dibenzoylmethane (DBM) by the hydrolytic sol-gel method, with modifications to the Stöber route. The structures of the resulting Xerogels were characterized by diffuse reflectance UV-VIS spectroscopy in the solid state, infrared absorption spectroscopy, Scanning Electron Microscopy (SEM) and 29Si Nuclear Magnetic Resonance (29Si NRM). The results showed favorable formation of hybrid organic-inorganic nanoparticles with efficient absorption/reflectance of radiation in the UV / VIS range, which enables their potential use as sunscreen.

An evaluation was made of the properties of sugarcane bagasse during the storage process for subsequent burning in a boiler. Samples of bagasse were collected over a period of 150 days from the Caeté sugar mill (MG) at various points of the stockpile soon after the sugarcane was pressed to extract its juice, as well as from natural bagasse, dry and damp. Thermal analyses of the samples were carried out and the results indicated that, during the storage of bagasse, dry or damp, the biomass loses up to 32% of its calorific power, due to decomposition of the hemicellulose.

The thermal stability of vegetable oils is an important factor that affects their quality. In this study, we investigated the thermal stability of oil and lecithin extracted from soybeans by two distinct processes: mechanical extraction (pressing) and physical extraction (solvent). Thermal analysis was used to obtain information about different methodologies of extraction. The physically extracted products proved more stable than those extracted mechanically. Raman and UV-Vis techniques were applied to underpin the discussion of process differences.

Silica gel was functionalised with chloropropyl groups through the sol-gel process and then a beta-diketone was incorporated into the support. Afterwards, Eu3+ ion and its chelates of 1,10-phenantroline (phen) and 2,2'-bipyridine (bpy), red phosphors, were supported on such silica. Luminescence studies of Eu3+ bound to this new material have shown that there is an increase in the intensity of the emission when the ion is isolated by ligands in the silica matrix. The energy transfer from the ligands phen and bpy to Eu3+ ion was observed in the excitation spectra, which present new bands ascribed to the ligands and/or complex. The Eu3+-functionalised silica was characterised by TGA and FTIR. TGA analysis showed that there is a large loss of mass around 300 °C, which is ascribed to the organic part of the material. The FTIR spectra presented the vibration modes for Si-C and -CH2-. The luminescent properties of the ions surrounding the Eu3+ ion were studied. The decay curve displayed a bi-exponential behaviour, indicating that there is more than one site of Eu3+ on the surface of the silica.