Abstract Inflammation-related immune responses and bone metabolism lead to extensive tooth loss in periodontitis. Objective: This study aims to investigate the effect of peroxisome proliferator-activated receptor (PPAR) alpha agonist anti-inflammatory treatment in vitro and in ligature-induced experimental periodontitis in vivo . Methodology: Splenocytes were isolated from C57BL/6J mice and cultured for 48 hours under the following conditions: control, P. gingivalis lipopolysaccharide (LPS) (1 µg/ml); experimental, LPS (1 µg/ml) + PPARα agonist (fenofibrate) at 1, 10, 50, 100 µM. MRNA and secreted protein levels of TNF-α expression were detected by RT-qPCR and ELISA, respectively. Silk ligatures (7-0) were tied around maxillary second molars of C57BL/6J mice for two weeks. Optimized doses of fenofibrate (50 µM) and vehicle control were injected into the contralateral side of the palatal gingiva on days three, six, and nine. At day 14, bone resorption, osteoclastogenesis, and gingival mRNA expression levels of TNF-α, IL-1β, IL-6, and RANKL/OPG were measured by micro-computed tomography, Tartrate-resistant acid phosphatase (TRAP) staining, and Real-time quantitative PCR, respectively. Results: TNF-α expression in cultured spleen cells were significantly increased in the presence of LPS, when compared with the control group, and significantly reduced by fenofibrate treatment in a dose-dependent manner from 1-100 µM (p<0.05). Gingival mRNA levels of TNF-α, IL-1β, IL-6, and the ratio of RANKL/OPG, were significantly decreased after injection of fenofibrate, when compared to the control side (p<0.05). Periodontal bone loss and TRAP positive cell formation were significantly decreased on the side with an injection of fenofibrate, as compared to the control side (p<0.05). Conclusions: An anti-inflammatory treatment, PPARα agonist, inhibited inflammation and periodontal bone loss in ligature-induced experimental periodontitis.

Abstract The charm of food photos plays a decisive role in advertising because people search and buy food on the Internet more frequently than ever. Photos with appealing food design elements can immediately attract people's attention. The same food with different design features will attract different consumer groups through photos on the web. They greatly affected consumers' feel, and purchase decisions. This study uses Taiwanese mango ice as an example to explore the perceptual reasons why consumers are attracted to existing mango ice products, their attractive design features, and the relationship between the two. Miryoku engineering was used to explore the relationship between consumers and the appeal of food design revealed by photos, the Evaluation Grid Method (EGM) was used to extract the attractive factors of food design, and the Quantification Theory Type 1 (QTT1) is used to analyze the weight of each design feature that affects the charm of food. Three Kansei factors and 16 concrete design elements were obtained through EGM, and the weights of food design elements that influence the charm were found using QTT1. The results show that the obtained regression models can explain the relationship between the design elements of food photos and the perception of customers. The application have important reference value for evaluating food design elements and market segmentation of consumer groups. This research proves the feasibility of using Kansei engineering to explore the charm of food design, and has reference value for future related research.

Abstract Objective To explore the molecular mechanism of neuropathologic damage induced by radiofrequency ablation at different temperatures. Methods This is basic research, and 36 SD rats were used to construct the neuropathological injury model. The rats were subjected to radiofrequency stimulation at different temperatures and were divided into 6 groups according to the temperature injury: 42°, 47°, 52°, 57°, 62°, and 67°C groups. Conduction time, conduction distance, and nerve conduction velocity were recorded after temperature injury. HE-staining was used to observe the histopathological morphology of the sciatic nerve. The expression of SCN9A, SCN3B, and NFASC protein in sciatic nerve tissue were detected by western blot. Results With the increase in temperature, nerve conduction velocity gradually decreased, and neurons were damaged when the temperature was 67°C. HE-staining showed that the degrees of degeneration of neurons in rats at 47°, 52°, 57°, 62°, and 67°C were gradually increased. The expression of SCN9A, SCN3B protein in 57°, 62°, 67°C groups were much higher than that of NC, 42°, 47°, 52°C groups. However, the expression of NFASC protein in 57°, 62°, 67°C groups was much lower than that of the NC, 42°, 47°, 52°C groups. Conclusion There was a positive correlation between temperature caused by the radiofrequency stimulation to neuropathological damage. The mechanism is closely related to the expression of SCN9A, SCN3B, and NFASC protein in nerve tissue caused by heat transfer injury.

Abstract Objective The purpose of this study is to investigate the pathogenic role of PPARα in periodontal antigen treated gingival cells in vitro and in experimental periodontitis in vivo . Methodology Gingival fibroblasts, gingival epithelial cells and splenocytes were isolated from C57BL/6J wild type (WT) mice and treated with fixed P. gingivalis at for 48 hours. The mRNA levels of PPARs, TNFα, IL-1β and IL-10 were detected by Real-time quantitative PCR. Silk ligatures after being soaked in the P.gingivalis suspension were tied around both maxillary second molars of WT mice or PPARα knock-out (KO) mice for two weeks. PPARα agonist fenofibrate and vehicle control were injected into the different side of the palatal gingiva on days 3, 6, and 9. At day 14, bone resorption and gingival mRNA expression levels of PPARs, TNFα, IL-1β and IL-10 were measured by micro-computed tomography and RT-qPCR respectively. Results P. gingivalis treatment downregulated the expression of PPARα, but not PPARβ or PPARγ, and increased the expression of TNF-α and IL-1β in Gingival fibroblasts, gingival epithelial cells and splenocytes from WT mice. Gingival mRNA levels of PPARα were significantly decreased in experimental periodontitis in WT mice. The bone loss of PPARα KO mice in experimental periodontitis was significantly higher than WT mice and was not reduced by fenofibrate treatment. Gingival TNFα protein expressions were significantly increased by P. gingivalis associated ligation and decreased by fenofibrate treatment in WT mice but not in PPARα KO mice. Conclusion This study suggests that PPARα plays an essential role in periodontitis.

Reportedly, circular RNAs (circRNAs) are crucial regulators in cancer progression. Nonetheless, the molecular mechanism of circRNAs in hepatocellular carcinoma (HCC) has not been fully clarified. Gene expression omnibus (GEO) database was employed to screen out the differentially expressed circRNAs in HCC. qRT-PCR and western blot were executed to detect circ_0001806 expression, miR-193a-5p expression, and MMP16 mRNA and protein expressions in HCC. The effect of circ_0001806 on HCC was analyzed by the CCK-8 method and Transwell experiment. RIP assay, pull-down experiment, and dual-luciferase reporter gene experiment were applied to validate the targeting relationships among circ_0001806, miR-193a-5p, and MMP16. Circ_0001806 was up-modulated in HCC tissues and cell lines. Knockdown of circ_0001806 impeded the multiplication, migration, and invasion of HCC cells. Circ_0001806 could up-regulate MMP16 expression through repressing miR-193a-5p, thereby facilitating the malignant biological behaviors of HCC. Circ_0001806 promoted HCC progression by regulating miR-193a-5p/MMP16 axis.

Abstract The fruits of Xanthium strumarium L., Asteraceae, have been used for various diseases in Chinese folk medicine, including allergic rhinitis, tympanitis, arthritis, ozena etc. The current study was aimed to investigate the therapeutic effects of caffeoylquinic acids from fruits of X. strumarium on allergic rhinitis in animals. The toxicity test indicated that the caffeoylquinic acids have no obvious toxicity. By using HPLC assays combined with reference standards, ten caffeoylquinic acids were identified as the predominant constituents. Anti-allergic activities of the caffeoylquinic acids were evaluated using passive cutaneous anaphylaxis test and Schultz-Dale test; dimethylbenzene induced ear edema test was performed to evaluate its anti-inflammatory effect. Then, the allergic rhinitis model in rats was established to evaluate the therapeutic effects of the caffeoylquinic acids against allergic rhinitis with the following indexes: allergic rhinitis symptom scores, serum levels of pro-inflammatory cytokines, histopathological examination, and histamine release. Our study revealed that the caffeoylquinic acids showed obvious anti-allergic and anti-inflammatory properties, and its treatments were beneficial for ameliorating the nasal symptoms, decreasing pro-inflammatory cytokines, and inhibiting the releases of histamine. Collectively, the caffeoylquinic acids might be utilized as effective and safe disease therapeutic agents for allergic rhinitis.

ABSTRACT The overuse of land has resulted in a sharp decline in ecological functions, affecting the environment as it relates to the existence and sustainable development of the whole biosphere. This work aims to evaluate the ecological and economic efficiencies of the land-use structure. A simulation model, CLUE-S (Conversion of Land-Use and its Effects at Small Region Extent), and an integrated model based on the MOP (Multi-Objective Program) and CLUE-S were applied to assess the suitability of unutilized lands in Huanghua City, China. This was to simulate the optimal structure of land-use in the research zone to avoid loss of the land ecological service functions and the decreasing values with rapid changes in the land-use structure. By the year 2020, the simulation of the single model shows that the economic efficiency is expected to increase, but the ecological efficiency will decline. Depending on the evaluation of the suitability of unutilized land and the optimization results of the integrated MOP- and CLUE-S-based models, the ecological and economic efficiencies are expected to increase by 1.17 and 2.23 %, respectively, compared with those in 2012. In addition, the sum of the two land functions will increase for the integrated MOP- and CLUE-S-based model by the year 2020 compared with the single model. Consequently, the ecological efficiency will significantly increase. However, the optimization solution based on the integrated MOP and CLUE-S model is better than the one based on the CLUE-S model.

ABSTRACT Brazil has a Microgravity Program mainly based on experiments using sounding rockets. Up to now, four missions have been carried out with approximately 35 experiments submitted in total. In all flights, the Associate Laboratory of Sensors and Materials of the Brazilian Space Research Institute (LABAS/INPE) participated with a fast solidification furnace, capable of producing temperatures up to 900 °C, which was tested with semiconductor and metal alloys. This paper describes the construction and the performance of that furnace during the last parabolic flight, Rio Verde Mission, occurred in 2016. The solidification furnace is now qualified and ready to be used by other institutions in sounding rocket flights.

Abstract The effects of allelochemicals and aqueous extracts from different Pogostemon cablin (Blanco) Benth., Lamiaceae, parts and rhizosphere soil on growth parameters, leaf membrane peroxidation and leaf antioxidant enzymes were investigated in patchouli. P. cablin seedlings were incubated in solutions containing allelochemicals and aqueous extracts from different patchouli parts and its rhizosphere soil at several concentrations. Firstly, the growth parameters were significantly reduced by the highest concentration of leaves, roots and stems extracts (p < 0.05). As compared to the control, plant height was reduced by 99.8% in the treatment with leaves extracts (1:10). The malondialdehyde content increased greatly when patchouli seedlings were subject to different concentrations of leaves, roots and stems extracts; meanwhile, the superoxide dismutase and peroxidase activities showed an increase trend at the low concentration, followed by a decline phase at the high concentration of roots and leaves extracts (1:10). What's more, leaves and roots extracts had a more negative effect on patchouli growth than stems extracts at the same concentrations. Secondly, the total fresh mass, root length and plant height were greatly reduced by the highest strength of soil extracts. Their decrements were 22.7, 74.9, and 33.1%, respectively. Thirdly, growth parameters and enzymatic activities varied considerably with the kinds of allelochemicals and with the different concentrations. Plant height, root length and total fresh weight of patchouli were greatly reduced by p-hydroxybenzoic acid (200 μM), and their decrements were 77.0, 42.0 and 70.0%, respectively. Finally, three useful measures on reducing the autotoxicity during the sustainable patchouli production were proposed.

Sesquiterpenes Essential oil produced by patchouli was one of the most important naturally occurring base materials used in the perfume industry, containing various sesquiterpenes. Three different parts (leaves, stems and roots) of Pogostemon cablin (Blanco) Benth., Lamiaceae, were profiled in relation to different maturation phases in this paper, evaluating the variations in content of the major sesquiterpenes in the essential oil. Twelve sesquiterpenes were analyzed by GC-MS throughout the maturity of P. cablin. Patchouli alcohol (37.54%-51.02% in leaves, 28.24%-41.96% in stems and 14.55%-35.12% in roots) was the major sesquiterpene during the maturation of the plant. The average content of several other sesquiterpenes (α-bulnesene, α-guaiene, seychellene, β-humulene and caryophyllene) were higher than 3% among leaves, stems and roots. The content of essential oil, patchouli alcohol, α-bulnesene and several other compounds were highly accumulated at 210 days of maturation after cultivation of P. cablin. Thus, this period was the best moment to exploit the maximum level of these high value-added compounds in P. cablin. Furthermore, our results indicated that the essential oil extracted from leaves of P. cablin has the highest potential to be used in the perfume industry.

Battery production is one of the main sources of heavy metals that present great harm to human health even in low concentrations. Chromium (Cr), Cadmium (Cd) and Lead (Pb) were measured in edible portions of vegetables and soils around a battery production area in China, and the potential health risk of heavy metal contamination to the local population via vegetable consumption was evaluated. Their concentrations in edible portions of vegetables were 2.354 (0.078-14.878), 0.035 (0.003-0.230) and 0.039 (0.003-0.178) mg kg-1, respectively. Approximately 3 % of the Cd in the vegetable samples exceeded the maximum concentration allowable by national food safety criteria, although Pb content in all samples were within the criteria. Transfer factors (TF) from soils to vegetables were dependent on vegetable species. Leguminous vegetables were more likely to accumulate Cr, while leaf vegetables tended to show higher levels of concentration of Cd and Pb. Melon vegetables demonstrated a relatively low capacity for accumulating the heavy metals studied. TF were positively correlated with soil organic matter and negatively correlated with soil pH. The mean estimated daily intake of Cr, Cd and Pb via dietary consumption of vegetables was 0.011, 1.65 × 10-4 and 1.84 × 10-4 mg kg-1 of body weight per day, respectively, levels that were much lower than the reference doses recommended by USEPA (U.S. Environmental Protection Agency) and JECFA (Joint FAO/WHO Expert Committee on Food Additives), indicating that the potential health risk of Cr, Cd and Pb exposure via vegetable consumption to the local population around this battery production area could be negligible.

Abstract: The Brazilian Microgravity Program is mainly based on experiments carried out on sounding rockets. Up to present days, three missions carrying a total of 25 experiments were made. In all flights, a fast solidification furnace, capable of producing temperatures up to 900º C, was used to process metal and semiconductor alloys in microgravity environment. This paper has described the furnace and the solidification experiment made during the last parabolic flight, called Maracati Mission, which has occurred in December, 2010.

Abstract: The purpose of this study was the temperature monitoring at bonding interface during the rotary friction welding process of dissimilar materiais: AA1050 aluminum with AISI 304 stainless steel. As it is directly related to the mechanical strenght of the junction, its experimental determination in real time is of fundamental importance for understanding and characterizing the main process steps, and the definition and optimization of parameters. The temperature gradients were obtained using a system called Thermocouple Data-Logger, which allowed monitoring and recording data in real-time operation. In the graph temperature versus time obtained, the heating rates, cooling were analyzed, and the maximum temperature was determined that occurred during welding, and characterized every phases of the process. The efficiency of this system demonstrated by experimental tests and the knowledge of the temperature at the bonding interface open new Unes of research to understand the process of friction welding.

Abstract: The purpose of this work was to assess the development of solid state joints of dissimilar material AA1050 aluminum and AISI 304 stainless steel, which can be used in pipes of tanks of liquid propellants and other components of the Satellite Launch Vehicle. The joints were obtained by rotary friction welding process (RFW), which combines the heat generated from friction between two surfaces and plastic deformation. Tests were conducted with different welding process parameters. The results were analyzed by means of tensile tests, Vickers microhardness, metallographic tests and SEM-EDX. The strength of the joints varied with increasing friction time and the use of different pressure values. Joints were obtained with superior mechanical properties of the AA1050 aluminum, with fracture occurring in the aluminum away from the bonding interface. The analysis by EDX at the interface of the junction showed that interdiffusion occurs between the main chemical components of the materials involved. The RFW proves to be a great method for obtaining joints between dissimilar materials, which is not possible by fusion welding processes.