Silicon carbide has been extensively used in structural applications, especially at high temperatures. In this work, Y2O3, Al2O3 and SiO2 were added to beta-SiC in order to obtain highly dense ceramics. Sintering was conducted in a dilatometer and in a graphite resistance furnace and the densification behaviour was studied. Sintered samples were characterised by density measurements, the crystalline phases were identified by X-ray diffraction. Microstructural observation of polished and polished/etched samples was carried out with help of scanning electron microscopy. Silicon carbide ceramics with more than 90% of the theoretical density were obtained by pressureless sintering if a suitable proportion of the additives is used.

Microstructure development and phase formation processes during sintering of silicon carbide based materials with AlN-Y2O3, AlN-Yb2O3, and AlN-La2O3 sintering additives were investigated. Densification of the materials occurred by liquid-phase sintering mechanism. Proportion of alpha- and beta-SiC powders in the initial mixtures was a variable parameter, while the molar ratio of AlN/RE2O3, and the total amount of additives (10 vol. %) were kept constant. Shrinkage behavior during sintering in interrelation with the starting composition of the material and the sintering atmosphere was investigated by high temperature dilatometry. Kinetics of b-SiC to a-SiC phase transformation during post-sintering heat treatment at temperatures 1900-1950 °C was studied, the degree of phase transformation being determined by quantitative x-ray analysis using internal standard technique. Evolution of microstructure resulting from beta-SiC to alpha-SiC transformation was followed up by scanning electron microscopy on polished and chemically etched samples. Transformation-controlled grain growth mechanism similar to the one observed for silicon nitride based ceramics was established. Possibility of in-situ platelet reinforced dense SiC-based ceramics fabrication with improved mechanical properties by means of sintering was shown.