Resumo Objetivou-se com este estudo desenvolver bebidas alcoólicas fermentadas de melão de diferentes variedades. As polpas extraídas do melão das variedades amarelo e cantaloupe foram diluídas com água (proporção 8:2), sendo corrigido o teor de sólidos solúveis totais para 15 °Brix com sacarose. As misturas tiveram o pH corrigido para 4,5 e foram adicionados 200 mg/L de metabissulfito de sódio e 4 g/L do inócuo. Obtiveram-se, assim, dois mostos para fermentação: F1 (mosto melão amarelo) e F2 (mosto melão cantaloupe). Os mostos foram colocados nos reatores, que foram mantidos a 32 °C durante toda a fermentação. Após a fermentação, foram determinados os parâmetros fermentativos do processo e a caracterização físico-química das bebidas. A amostra F1 apresentou o maior rendimento do processo de fermentação (96,56%), se sobressaindo também, quando comparada a F2, em relação aos parâmetros de produtividade de etanol e biomassa. Os parâmetros físico-químicos apresentaram-se em conformidade com a legislação em sua maioria, com destaque para o teor alcoólico (5,03% e 6,80% v/v), em que a bebida F1 apresentou o maior valor. Conclui-se que as bebidas elaboradas são como alternativas viáveis para diminuir o desperdício de melão, principalmente no pico da safra, e que F1 é a mais indicado para reprodução em escala industrial.
Abstract The objective of the study was to develop fermented alcoholic beverages from different melon varieties. The pulps extracted from melons of the yellow and cantaloupe varieties were diluted with water (ratio of 8:2), and the total soluble solids contents corrected to 15 °Brix with sucrose. The pH values of the mixtures were adjusted to 4.5, sodium metabisulphite (200 mg/L) added and the inoculum (4 g/L) added, thus obtaining two fermentation musts, F1 (yellow melon must) and F2 (cantaloupe melon must). The musts were placed in the reactors, which were maintained at 32 °C throughout fermentation. The fermentation parameters of the process and the physicochemical characteristics of the beverages were determined. The F 1 sample presented the highest fermentation process yield (96.56%), also standing out from F2 in relation to the parameters of ethanol and biomass productivity. The majority of the physicochemical parameters complied with the legislation, with emphasis on the alcoholic content (5.03% and 6.80% v/v), for which the F1 drink presented the highest value. It was concluded that these beverages were viable alternatives to reduce the waste of melon, mainly at the peak of the harvest, and that F1 was the most suitable variety for industrial scale reproduction.