Resumo Novos depósitos de argila bentonítica foram descobertos no estado brasileiro da Paraíba, sendo o mais recente no município de Olivedos. Estudos recentes descobriram a presença de altos níveis de minerais não argilosos que podem produzir resultados insatisfatórios ao tentar usar essas argilas em fluidos de perfuração. Para torná-los adequados para esse fim, utilizaram-se MgO e CaCl2 como aditivos químicos e analisaram-se suas influências nas propriedades reológicas dessas argilas, utilizando técnica de planejamento experimental e análise estatística. As amostras foram obtidas utilizando modelagem experimental pela técnica de delineamento de misturas; inicialmente as argilas foram transformadas com compostos de sódio e posteriormente dosadas com MgO e CaCl2. As propriedades reológicas, viscosidade aparente (AV) e viscosidade plástica (PV), foram determinadas de acordo com a normativa da Petrobras (AV≥15 cP; PV≥4 cP). Os resultados mostraram que os valores de AV e PV aumentaram consideravelmente e que o MgO foi o aditivo que mais contribuiu para a melhoria dessas propriedades, tornando-os adequados para uso em fluidos de perfuração à base de água.

Abstract New deposits of bentonite clays have been discovered in the Brazilian State of Paraíba; the most recent was at the municipality of Olivedos. Recent studies have discovered the presence of high levels of non-clay minerals that can produce unsatisfactory results when attempting to use these clays in drilling fluids. In order to make them suitable for this purpose, the MgO and CaCl2 as chemical additives were used and their influences on the rheological properties of these clays were analyzed, using an experimental planning technique and statistical analysis. The samples were obtained using experimental modeling by the delineation of mixtures technique; first, the clays were transformed with sodium carbonate and then dosed with MgO and CaCl2. The rheological properties, apparent viscosity (AV) and plastic viscosity (PV) were determined according to the Petrobras standard (AV≥15 cP; PV≥4 cP). The results showed that the values of AV and PV increased considerably and that MgO was the additive that contributed most to the improvement of these properties, making these additives suitable for use in water-based drilling fluids.

Filogenias baseadas em seqüências totais têm baixo conteúdo informativo. Erros comuns são acreditar que a qualidade dos caracteres pode ser ignorada e que é suficiente confiar nos algoritmos computacionais. Apesar de ampla preferência por métodos a posteriori para a avaliação de caracteres, métodos a priori tornam-se necessários para produzir séries de transformação independentes das topologias das árvores. Propomos um método qualitativo passo a passo para analisar seqüências de proteínas. Codons informativos são selecionados, séries de transformação alternativas de aminoácidos são analisadas e as transformações mais parcimoniosas são hipotetizadas. Conduzimos quatro análises filogenéticas em cobras Phylodrininae. A árvore baseada em todos os nucleotídeos produz a menor resolução. Árvores baseadas na exclusão das terceiras posições, numa matriz de passos assimétrica, e em nosso protocolo de análise produzem resultados similares. Nosso método elimina ruído ao hipotetizar séries de transformação explícitas para cada aminoácido informativo para a codificação de proteínas. Essa abordagem se aproxima de métodos qualitativos para dados morfológicos, nos quais apenas caracteres interpretados com sucesso num contexto filogenético são usados em análises cladísticas. O método permite utilizar informação de caracteres contidos no alinhamento original da seqüência e, portanto, tem maior poder de resolução para inferir árvores filogenéticas que alguns métodos tradicionais (como métodos de distância).

Total sequence phylogenies have low information content. Ordinary misconceptions are that character quality can be ignored and that relying on computer algorithms is enough. Despite widespread preference for a posteriori methods of character evaluation, a priori methods are necessary to produce transformation series that are independent of tree topologies. We propose a stepwise qualitative method for analyzing protein sequences. Informative codons are selected, alternative amino acid transformation series are analyzed, and most parsimonious transformations are hypothesized. We conduct four phylogenetic analyses of philodryanine snakes. The tree based on all nucleotides produces least resolution. Trees based on the exclusion of third positions, on an asymmetric step matrix, and on our protocol, produce similar results. Our method eliminates noise by hypothesizing explicit transformation series for each informative protein-coding amino acid. This approaches qualitative methods for morphological data, in which only characters successfully interpreted in a phylogenetic context are used in cladistic analyses. The method allows utilizing character information contained in the original sequence alignment and, therefore, has higher resolution in inferring a phylogenetic tree than some traditional methods (such as distance methods).

Increasing restrictions on the use of artificial pigments in the food industry, imposed by the international market, have increased the importance of raw materials containing natural pigments. Of those natural substances with potential applications turmeric rhizomes (Curcuma longa L), are one of the most important natural sources of yellow coloring. Three different pigments (curcumin, desmetoxycurcumin, and bis-desmetoxycurcumin) constitute the curcuminoids. These pigments are largely used in the food industry as substitutes for synthetic dyes like tartrazin. Extraction of curcuminoids from tumeric rhizomes with supercritical CO2 can be applied as an alternative method to obtain curcuminoids, as natural pigments are in general unstable, and hence degrade when submitted to extraction with organic solvents at high temperatures. Extraction experiments were carried out in a supercritical extraction pilot plant at pressures between 25 and 30 MPa and a temperature of 318 K. The influence of drying pretreatment on extraction yield was evaluated by analyzing the mass transfer kinetics and the content of curcuminoids in the extracts during the course of extraction. The chemical identification of curcuminoids in both the extract and the residual solid was performed by spectrophotometry. Mass transfer within the solid matrix was described by a linear first-order desorption model, while that in the gas phase was described by a convective mass transfer model. Experimental results showed that the concentration profile for curcuminoids during the supercritical extraction process was higher when the turmeric rhizomes were submitted to a drying pretreatment at 343 K.