RESUMO Objetivo: Avaliar a cor de diferentes resinas ortodônticas expostas a três enxaguantes bucais, por um intervalo de tempo prolongado (simulação de 10 anos de envelhecimento). Métodos: 160 espécimes foram distribuídos em quatro grupos, de acordo com a resina de colagem ortodôntica (Concise, Transbond XT, Transbond Plus Color Change e Natural Ortho). Cada grupo foi exposto a diferentes tipos de enxaguantes bucais: à base de álcool (Listerine®), isento de álcool (Oral-B®), clorexidina (Periogard®) ou água destilada, como controle. Os espécimes foram submetidos a dois ciclos de manchamento e envelhecimento artificial. A cor foi avaliada por meio de um espectrofotômetro digital no início do experimento e após cada ciclo. O sistema utilizado para avaliar as alterações de cor foi o CIE L*a*b*. Os dados foram analisados utilizando-se o teste ANOVA e o teste post-hoc de Tukey. Resultados: Após a simulação de 10 anos de envelhecimento, as resinas Transbond XT e Natural Ortho não apresentaram diferenças estatisticamente significativas no ∆E, quando expostas a diferentes enxaguantes bucais. Os espécimes do grupo Concise expostos ao enxaguante bucal sem álcool apresentaram diferença significativa quando comparados aos espécimes do mesmo grupo expostos aos outros enxaguantes bucais. Os espécimes do grupo Transbond Plus Color Change expostos à clorexidina e ao enxaguante bucal à base de álcool apresentaram diferença significativa quando comparados aos espécimes dos grupos expostos à água e ao enxaguante bucal sem álcool. Conclusão: Todas as resinas ortodônticas avaliadas apresentaram alterações de cor clinicamente perceptíveis quando expostas a pelo menos um dos enxaguantes bucais, com exceção da resina ortodôntica Natural Ortho. A resina Concise exposta à solução isenta de álcool foi a que apresentou os maiores valores de alteração de cor.

ABSTRACT Objective: To assess the color of different orthodontic resin bonding agents exposed to three antiseptic mouthrinses for a prolonged time interval (10-year aging simulation). Methods: 160 specimens were distributed into four groups, according to the orthodontic resin bond agent (Concise, Transbond XT, Transbond Plus Color Change, and Natural Ortho). Each group was exposed to different antiseptic mouthrinses: alcohol-based (Listerine®), alcohol-free (Oral-B®), chlorhexidine (Periogard®) and distilled water as the control. Specimens were submitted to two cycles of staining and artificial aging. Color was evaluated by means of a digital spectrophotometer at the beginning of the experiment and after every cycle. The system used to assess color changes was the CIE L*a*b*. Data was analyzed using the ANOVA and Tukey post-hoc test. Results: After simulation of 10 years of aging, Transbond XT and Natural Ortho composites presented no statistically significant differences in ∆E when exposed to different mouthrinses. The Concise composite specimens exposed to alcohol-free mouthrinse presented a significant difference when compared with specimens from the same group exposed to other antiseptic mouthrinses. Transbond Plus Color Change specimens exposed to chlorhexidine mouthrinse and to alcohol-containing mouthrinse presented a significant difference when compared with the specimens from the group exposed to water and alcohol-free antiseptic. Conclusion: All orthodontic resin bonding agents tested presented clinically perceptible color changes when exposed to at least one of the mouthrinses, except for the Natural Ortho composite. The Concise composite exposed to the alcohol-free solution was the resin that presented the highest color change values.

RESUMO Objetivo: Realizar simulação pelo método de elementos finitos (MEF) para determinar a tensão e o deslocamento dos mini-implantes e do aparelho expansor durante a expansão rápida da maxila, variando a quantidade e localização dos mini-implantes. Métodos: Para realização da simulação computacional, foi utilizada uma malha tridimensional para a maxila, mini-implantes e aparelho expansor. As comparações foram feitas em seis configurações de MARPE (Mini-implant Assisted Rapid Palatal Expander), com quantidades e localização diferentes dos mini-implantes. Foram modeladas uma sutura fechada, que recebeu duas ativações de 0,25 mm, e outra sutura com abertura de 0,5 mm, que recebeu 20 ativações, também de 0,25 mm. Resultados: Para a sutura fechada, os valores máximos de deslocamento nos mini-implantes foram entre 0,253 e 0,280 mm, e as tensões, entre 1348,9 e 2948,2 MPa; e no aparelho expansor, os valores de deslocamento foram entre 0,256 e 0,281 mm, e as tensões, entre 738,52 e 1207,6 MPa. Para a sutura aberta, os valores máximos de deslocamento nos mini-implantes foram entre 2,57 e 2,79 mm, e as tensões, entre 5.765,3 e 10.366 MPa; e no aparelho os deslocamentos máximos foram entre 2,53 e 2,89 mm, e as tensões, entre 4.859,7 e 9.157,4 MPa. Conclusões: Ocorreram maiores concentrações de tensão no mini-implante do que no braço do aparelho expansor. Nas simulações com configuração de três mini-implantes, foi observada sobrecarga de tensão no mini-implante isolado. Os deslocamentos dos mini-implantes e braços do aparelho foram semelhantes em todas as simulações.

ABSTRACT Objective: In this study, simulations were performed by the finite element method (FEM) to determine the tension and displacement in mini-implants and in expander appliance during rapid maxillary expansion, by varying the number and location of the mini-implants. Methods: For the computational simulation, a three-dimensional mesh was used for the maxilla, mini-implants and expander appliance. Comparisons were made on six different Mini-implant Assisted Rapid Palatal Expander (MARPE) configurations, by varying the amount and location of mini-implants. A closed suture was design and received two activations of 0.25 mm, and an open suture had a 0.5-mm aperture that received 20 activations, also of 0.25 mm. Results: For the closed suture, the maximum displacement values in the mini-implants were between 0.253 and 0.280 mm, and stress was between 1,348.9 and 2,948.2 MPa; in the expander appliance, the displacement values were between 0.256 and 0.281 mm, and stress was between 738.52 and 1,207.6 MPa. For the open suture, the maximum displacement values in the mini-implants were between 2.57 and 2.79 mm, and stress was between 5,765.3 and 10,366 MPa; in the appliance, the maximum displacements was between 2.53 and 2.89 mm, and stress was between 4,859.7 and 9,157.4 MPa. Conclusions: There were higher stress concentrations in the mini-implant than in the expander arm. In the simulations with a configuration of three mini-implants, stress overload was observed in the isolated mini-implant. Displacements of the mini-implants and arms of the appliance were similar in all simulations.

Resumo A leitura literária se modificou com a cultura digital, por meio de obras diferentes daquelas produzidas pela cultura impressa. Neste artigo, apresentamos um recorte dos resultados de uma pesquisa realizada com jovens brasileiros de 15 a 17 anos. Apresentamos as experiências de leitura literária digital de jovens leitores, procurando identificar as formas de busca e de acesso às obras literárias digitais e digitalizadas lidas por eles. A investigação adotou uma perspectiva quantitativa, com aplicação de questionários, e qualitativa, com acompanhamento das práticas de leitura literária digital de leitores jovens. Verificamos que os ambientes digitais de busca são diversos, mas nem sempre fáceis de serem conhecidos pelos jovens leitores. Para cada tipo de leitura literária digital, existem formas específicas de aceso nos ambientes digitais que as disponibilizam, bem como para cada ambiente digital que disponibiliza obras literárias são necessários procedimentos específicos para localização das obras.

Abstract The literary reading has changed with the digital culture through digital works different from those produced by the printed culture. In this article we present a summary of the results from a survey conducted with young Brazilians aging from 15 to 17 years old. We present the experiences of digital literary reading of young readers seeking to identify the forms of search and access to digital and digital literary works read by them. The investigation adopted a quantitative perspective, with application of questionnaires, and qualitative, with follow-up of the practices of digital literary reading of young readers. For each type of digital literary reading there are specific ways to access them in the digital environments that make them available, as well as for each digital environment that provides digital literary works, specific procedures of localization of works are necessary.

RESUMO Objetivo: avaliar o volume e a morfologia da porção média da faringe (PMF) em adolescentes com diferentes padrões esqueléticos no sentido anteroposterior. Método: para esse estudo transversal, foram selecionados cento e vinte e seis pacientes (56 homens e 70 mulheres) que tinham tomografia computadorizada de feixe cônico (TCFC) em seus registros. Os participantes foram classificados de acordo com o valor do ângulo ANB, em Classe I (1o ≥ ANB ≤ 3o), Classe II (ANB > 3o) e Classe III (ANB < 1o). O volume total (Vt), a área axial mínima (AxMin) e a morfologia da PMF e de suas subdivisões - velofaringe (VF) e orofaringe (OF) - foram avaliados na TCFC e em software de reconstrução tridimensional (3D) de imagens. As comparações intergrupos foram realizadas por meio dos testes ANOVA e post-hoc de Tukey. As correlações entre os valores de Vt e Axmin das vias aéreas com os valores do ângulo ANB foram testadas por meio de análise de regressão linear, considerando-se o sexo como uma covariável. Resultados: diferença estatisticamente significativa entre os grupos foi observada apenas no Vt da VF; indivíduos Classe II apresentaram Vt significativamente menor (6.863,75 ± 2.627,20 mm3) do que indivíduos Classe III (9.011,62 ± 3.442,56 mm3) (p< 0,05). Não foram observadas diferenças significativas entre os grupos em nenhuma outra variável avaliada, nem na PMF, nem na OF (p> 0,05). Foi evidenciada uma correlação negativa significativa entre Vt e Axmin e os valores do ângulo ANB; dimorfismo sexual foi observado para algumas variáveis. Conclusões: indivíduos Classe II apresentam o menor Vt da VF. O Vt e a Axmin tenderam a diminuir quando os valores do ângulo ANB aumentaram, em todas as regiões avaliadas.

ABSTRACT Objective: To assess the volume and morphology of the middle region of the pharynx (MRP) in adolescents with different anteroposterior craniofacial skeletal patterns. Methods: One hundred twenty-six patients (56 male and 70 female), who had cone-beam computed tomography (CBCT) within their records, were selected for this cross-sectional study. Participants were classified, according to their ANB angle value, in Class I (1o ≤ ANB ≤ 3o), Class II (ANB > 3o) and Class III (ANB < 1o). The total volume (tV), minimum axial area (AxMin) and morphology of the MRP and its subdivisions - velopharynx (VP) and oropharynx (OP) - were characterized by CBCT and 3-dimensional image reconstruction software. Intergroup comparisons were performed by ANOVA and Tukey post-hoc tests. Correlations between tV and Axmin with the ANB angle values were tested using linear regression analysis, considering sex as covariable. Results: Statistically significant difference between groups were observed in tV only for the VP region; Class II individuals presented significantly lower tV (6863.75 ± 2627.20 mm3) than Class III subjects (9011.62 ± 3442.56 mm3) (p< 0.05). No significant differences were observed between groups for any other variable assessed, neither in MRP nor in the OP region (p> 0.05). A significant negative correlation was evidenced between tV and Axmin and the ANB angle values; sexual dimorphism was observed for some variables. Conclusions: Class II subjects have smaller tV in the VP region. tV and Axmin tend to decrease in all evaluated regions when the ANB angle values increase.

A tea made with the leaves or stem bark of Bauhinia pulchella Benth (Fabaceae) is used in the treatment of diabetes. Ethanol (EEF) and aqueous (EAF) extracts were obtained from the leaves and the antioxidant and citotoxic activities were tested, as well as quantify the content of flavonoids and phenolic compounds (TPC). EEF and EAF showed similar profiles by HPLC, with the presence of three compounds. Column chromatography reverse phase (C18) and Sephadex LH-20, followed by semi preparative HPLC-C18 of EAF resulted in three flavonoids. Their structures were identified by 1H and 13C NMR as myricitrin (1), quercitrin (2) and afzelin (3). In assay of determination of reactive substances to thiobarbituric acid (TBARS), with DPPH, ABTS and nitric oxide (NO•) free radicals, EAF showed antioxidant potential higher than the EEF. This is the first report of the occurrence of the flavonoids 1-3, in the species B. pulchella. EEF and EAF were inactive in the cytotoxicity assays. In short, the polar extracts from the leaves of B. pulchella proved to be promising sources of biomolecules phenolic, with antioxidant potential, which may, in the future, be used as chemical markers for species and validation of therapeutic use.

ABSTRACT Introduction: In dental practice, low-level laser therapy (LLLT) and high-intensity laser therapy (HILT) are mainly used for dental surgery and biostimulation therapy. Within the Orthodontic specialty, while LLLT has been widely used to treat pain associated with orthodontic movement, accelerate bone regeneration after rapid maxillary expansion, and enhance orthodontic tooth movement, HILT, in turn, has been seen as an alternative for addressing soft tissue complications associated to orthodontic treatment. Objective: The aim of this study is to discuss HILT applications in orthodontic treatment. Methods: This study describes the use of HILT in surgical treatments such as gingivectomy, ulotomy, ulectomy, fiberotomy, labial and lingual frenectomies, as well as hard tissue and other dental restorative materials applications. Conclusion: Despite the many applications for lasers in Orthodontics, they are still underused by Brazilian practitioners. However, it is quite likely that this demand will increase over the next years - following the trend in the USA, where laser therapies are more widely used.

Objetivo: testar a hipótese nula de que o processo de envelhecimento em braquetes autoligáveis não é superior ao de braquetes convencionais. Métodos: Vinte e cinco braquetes metálicos convencionais (GN, 3M/Unitek; GE, GAC; VE, Aditek) e 25 autoligáveis (SCs, 3M/Unitek; INs, GAC; ECs, Aditek) de três fabricantes (n = 150) foram submetidos ao envelhecimento em solução de NaCl à temperatura constante de 37 ± 1ºC, durante 21 dias. O conteúdo de íons níquel, cromo e ferro na solução coletada com 7, 14 e 21 dias foi quantificado por meio de espectrofotometria de absorção atômica. Depois de completado o processo de envelhecimento, os braquetes foram analisados com microscópio eletrônico de varredura (MEV), em magnificações de 22x e de 1.000x. Resultados: comparando-se a liberação de metais por braquetes autoligáveis e convencionais do mesmo fabricante, observou-se que o grupo SCs liberou mais níquel (p < 0,05) que o grupo GN após 7 e 14 dias, mas menos cromo (p < 0,05) após 14 dias e menos ferro (p < 0,05) nos três períodos experimentais. O grupo INs liberou menos ferro (p < 0,05) que o grupo GE após 7 dias, e menos níquel, cromo e ferro (p < 0,05) após 14 e 21 dias. O grupo ECs liberou mais níquel, cromo e ferro (p < 0,05) que o grupo VE após 14 dias; entretanto, liberou menos níquel e cromo (p < 0,05) após 7 dias e menos cromo e ferro (p < 0,05) após 21 dias. A análise no MEV demonstrou alterações na topografia da superfície de braquetes convencionais e autoligáveis. Conclusões: o processo de envelhecimento em braquetes autoligáveis não foi superior ao de braquetes convencionais do mesmo fabricante. A hipótese nula está aceita.

Objective: To test the null hypothesis that the aging process in self-ligating brackets is not higher than in conventional brackets. Methods: Twenty-five conventional (GN-3M/Unitek; GE-GAC; VE-Aditek) and 25 self-ligating (SCs-3M/Unitek; INs-GAC; ECs-Aditek) metal brackets from three manufacturers (n = 150) were submitted to aging process in 0.9% NaCl solution at a constant temperature of 37 ± 1ºC for 21 days. The content of nickel, chromium and iron ions in the solution collected at intervals of 7, 14 and 21 days was quantified by atomic absorption spectrophotometry. After the aging process, the brackets were analyzed by scanning electron microscopy (SEM) under 22X and 1,000X magnifications. Results: Comparison of metal release in self-ligating and conventional brackets from the same manufacturer proved that the SCs group released more nickel (p < 0.05) than the GN group after 7 and 14 days, but less chromium (p < 0.05) after 14 days and less iron (p < 0.05) at the three experimental time intervals. The INs group released less iron (p < 0.05) than the GE group after 7 days and less nickel, chromium and iron (p < 0.05) after 14 and 21 days. The ECs group released more nickel, chromium and iron (p < 0.05) than the VE group after 14 days, but released less nickel and chromium (p < 0.05) after 7 days and less chromium and iron (p < 0.05) after 21 days. The SEM analysis revealed alterations on surface topography of conventional and self-ligating brackets. Conclusions: The aging process in self-ligating brackets was not greater than in conventional brackets from the same manufacturer. The null hypothesis was accepted.

OBJETIVO: Reportar complicações precoces numa série de transplantes endoteliais realizados por estagiários de córnea. MÉTODOS: Revisão retrospectiva dos transplantes endoteliais realizados por estagiários de córnea do segundo ano. Descritas as complicações precoces e respectivo tratamento. RESULTADOS: Foram realizados 34 transplantes endoteliais pelos estagiários de córnea entre julho de 2007 e agosto de 2008. Destes, 29 foram realizados pela técnica de "Descemet stripping endothelial keratoplasty" e 5 "Descemet stripping automated endothelial keratoplasty". Foram realizadas 15 cirurgias combinadas, 14 associadas a facoemulsificação com implante de lente intraocular e 1 associada a facectomia com implante de lente intraocular. A principal indicação foi por distrofia de Fuchs com 18 casos, 11 foram indicados por ceratopatia bolhosa após cirurgia de catarata, 4 por falência primária após transplante endotelial e 1 por distrofia endotelial congênita hereditária. A complicação mais encontrada foi descolamentos do botão doado em 8 olhos (23,5%). Falência primária foi encontrado em 7 olhos (20,6%). Glaucoma agudo por bloqueio pupilar foi encontrado em 1 paciente (2,9%). CONCLUSÕES: O alto número de complicações encontradas nestas cirurgias, que foram as primeiras de um grupo de 6 estagiários de córnea, mostra a longa curva de aprendizado para este procedimento cirúrgico. A orientação das primeiras cirurgias por cirurgiões mais experientes pode diminuir a curva de aprendizado e a taxa de complicações.

PURPOSE: To report early complications in endothelial keratoplasty performed by cornea fellows. METHODS: Retrospective study of endothelial keratoplasty performed by second-year cornea fellows. Described the early complications and its treatments. RESULTS: Thirty four endothelial keratoplasty were performed by cornea fellows, from July 2007 to August 2008. From this, 29 were Descemet stripping endothelial keratoplasty and 5 Descemet stripping automated endothelial keratoplasty; 14 combined with phacoemulsification and 1 with extracapsular cataract surgery. The main indication was Fuchs' dystrophy (18 cases), followed by bullous keratopathy (11 cases), primary failure after endothelial keratoplasty (4 cases) and congenital hereditary endothelial dystrophy (1 case). Main surgery complication was donor button detachment in 8 eyes (23.5%), followed by primary graft failure in 7 eyes (20.6%) and acute glaucoma after pupillary block in 1 eye (2.9%). CONCLUSIONS: The complication rate in this series, which were the first ever in a group of six cornea fellows, was high. This shows the steep learning curve for this surgical procedure. The assistance of an experienced surgeon could help to achieve a less steep learning curve with a lower complication rate.

OBJETIVO: verificar se o mini-implante no palato é eficaz como ancoragem direta para distalização dos molares superiores. MÉTODOS: foi utilizado um modelo em acrílico da arcada superior. Após a confecção da canaleta na região correspondente aos alvéolos dentários, os dentes em acrílico foram fixados com cera #7, montado aparelho ortodôntico com a técnica Edgewise e inserido um mini-implante (SIN, São Paulo) no local correspondente à rafe palatina. Foram colocados arco 0,19" x 0,25" e barra transpalatina, soldados na barra dois ganchos para retenção de dois elásticos em cadeia de dois elos, a uma carga de 150g/f de cada lado (Unitek), que se estenderam dos ganchos até o mini-implante. O modelo da maxila foi mergulhado 40 vezes em banheira e fotografado após cada mergulho para observação da movimentação dentária. Os dados foram analisados pela análise da variânçia (ANOVA) e teste de Tukey. RESULTADOS: os molares deslocaram-se distalmente 3,1mm, em média, com inclinação distal entre 3 e 5mm. CONCLUÕES: a movimentação dos molares ocorreu pela inclinação distal, com leve rotação, mas sem efeito extrusivo.

OBJECTIVE: To assess whether palatal mini-implants are effective as direct anchorage for distal movement of the upper molars. METHODS: It was used an acrylic model of the upper dental arch. After making a groove in the region corresponding to dental alveolus, acrylic teeth were fixed in groove with #7 wax, with the roots being previously immersed in adhesive wax. The orthodontic appliance was placed according to the Edgewise technique and then a mini-implant (SIN, São Paulo, Brazil) was inserted at the site corresponding to the palatal raphe. A 0.019 x 0.025-in stainless steel archwire was made and attached to the upper arch with elastics. A transpalatal arch bar (0.019 x 0.025in) was mounted and two hooks were soldered to it in order to retain chain elastics (Unitek, Brazil) to be connected to the mini-implant under a force of 1.5 N on each side. The maxillary model was immersed in water 40 times and photographed after each immersion, for observation of dental movements. Analysis of variance (ANOVA) and Tukey's test were employed for analyzing the obtained data. RESULTS: Molars displaced distally 3.1 mm, in average, with distal inclination ranging from 3 to 5 mm. CONCLUSIONS: Molar movements occurred due to distal inclination, with a slight rotation and no extrusive effect.

INTRODUÇÃO: diferentes protocolos de irradiação por laser de baixa potência (LBP) têm sido testados para potencializar o movimento ortodôntico; entretanto, há resultados divergentes. Foi sugerido que seu efeito bioestimulador ocorre nas fases de proliferação e diferenciação celular, não agindo em estágios tardios. OBJETIVO: avaliar o efeito de dois protocolos de irradiação do LBP na movimentação ortodôntica: um com irradiações diárias e outro em que irradiações foram realizadas apenas nos períodos iniciais. MÉTODOS: trinta e seis ratos Wistar foram divididos em grupos controles (GC1, GC2 e GC3) e irradiados (GIr1, GIr2 e GIr3), de acordo com a presença de dispositivo ortodôntico, a presença de irradiação, o tipo de protocolo de irradiação e a data de eutanásia (3º ou 8º dia de experimento). Ao final dos períodos experimentais, foram realizadas mensurações da movimentação dentária, análise qualitativa das reações celulares e teciduais do periodonto e contagem de vasos sanguíneos no ligamento periodontal. RESULTADOS: a quantidade de movimentação não diferiu entre os grupos num mesmo tempo experimental (p < 0,05). A análise qualitativa revelou maior atividade absortiva nos grupos irradiados ao final de 7 dias, especialmente quando as irradiações foram diárias. Nos grupos irradiados diariamente, a contagem de vasos foi aumentada em relação aos animais isentos de dispositivo ortodôntico e de aplicações de LBP (p < 0,05). CONCLUSÃO: apesar de verificada angiogênese em certos grupos irradiados, os protocolos de irradiação testados não foram capazes de acelerar a movimentação dentária, e foi possível verificarem-se absorções radiculares.

INTRODUCTION: Different low-level laser (LLL) irradiation protocols have been tested to accelerate orthodontic tooth movement (OTM). Nevertheless, divergent results have been obtained. It was suggested that the stimulatory action of low level laser irradiation occurs during the proliferation and differentiation stages of bone cellular precursors, but not during later stages. OBJECTIVE: The purpose of this study was to determine the effect of two protocols of LLL irradiation on experimental tooth movement: One with daily irradiations and another with irradiations during the early stages. METHODS: Thirty-six rats were divided into control groups (CG1, CG2, CG3) and irradiated groups (IrG1, IrG2, IrG3) according to the presence of: experimental tooth movement, laser irradiation, type of laser irradiation protocol and date of euthanasia (3th or 8th day of experiment). At the end of experimental periods, a quantitative evaluation of the amount of OTM was made and the reactions of the periodontium were analyzed by describing cellular and tissue reactions and by counting blood vessels. RESULTS: The amount of OTM revealed no significant differences between groups in the same experimental period (p < 0.05). Qualitative analysis revealed the strongest resorption activity in irradiated groups after seven days, especially when using the daily irradiation protocol. There was a higher number of blood vessels in irradiated animals than in animals without orthodontic devices and without laser irradiation (p < 0.05). CONCLUSION: Moreover, angiogenesis was verified in some of the irradiated groups. The irradiation protocols tested were not able to accelerate OTM and root resorption was observed while they were applied.

The aim of this study was to test the hypothesis that there is a direct relationship between surface structure and tensile strength of orthodontic alloys submitted to different levels of welding current. Three types of alloys were assessed. One hundred and eight cross-sectional test specimens ("X") were made, 18 for each wire combination, and divided into 6 groups: SS (steel-steel); SN (steel-NiTi); SB (steel-Beta-Ti); NN (NiTi-NiTi); NB (NiTi-Beta-Ti) and BB (Beta-Ti-Beta-Ti), submitted to 6 spot-welding procedures at different levels of current (Super Micro Ponto 3000). Student-Newman-Keuls, Wilcoxon signed-rank, and Kruskal-Wallis tests were used (p < .05). Statistical difference was found between SN group and all the other alloy combinations (p < .05). Initial roughness of alloys ranged from .04 to .55 Ra, with statistical difference between groups (p < .001). The hypothesis was rejected and the tensile strength of Ti-alloys combinations Steel × Beta-Ti was significantly affected by the current level at P50, which changed the properties and structure of the wires.

OBJECTIVE: To assess and compare the number of Streptococcus mutans and Candida albicans colonies in patients with Haas and Hyrax appliances before and after insertion. METHODS: The sample consisted of 84 patients requiring orthodontic treatment. For all patients a midpalatal suture expansion was indicated. Patients were randomly divided into Group HA, who used the Haas appliance (n = 42) and Group HY, who used the Hyrax appliance (n = 42). Initially and thirty days after appliance insertion all patients were submitted to saliva collections. The saliva was diluted followed by seeding in Mitis Salivarius and CHROMagar media, for growth of S. mutans and C. albicans respectively. RESULTS: Results showed statistically significant difference between groups HA and HY for Streptococcus mutans and Candida albicans (p <0.05). Haas appliance promoted greater S. mutans and C. albicans proliferation when compared to Hyrax appliance. CONCLUSION: The Haas appliance favored greater proliferation of S. mutans and C. albicans when compared with the Hyrax appliance. Insertion of the appliances resulted in greater buildup of microorganisms.

INTRODUCTION: Extraction decisions are extremely important in during treatment planning. In addition to the extraction decision orthodontists have to choose what tooth should be extracted for the best solution of the problem and the esthetic/functional benefit of the patient. OBJECTIVE: This article aims at reviewing the literature relating the advantages, disadvantages and clinical implications of asymmetric extractions to orthodontics. METHODS: Keywords were selected in English and Portuguese and the EndNote 9 program was used for data base search in PubMed, Web of Science (WSc) and LILACS. The selected articles were case reports, original articles and prospective or retrospective case-control studies concerning asymmetrical extractions of permanent teeth for the treatment of malocclusions. CONCLUSION: According to the literature reviewed asymmetric extractions can make some specific treatment mechanics easier. Cases finished with first permanent molars in Class II or III relationship in one or both sides seem not to cause esthetic or functional problems. However, diagnosis knowledge and mechanics control are essential for treatment success.

OBJETIVO: Medir a espessura ventricular direita e esquerda em falecidos com história de hipertensão arterial, submetidos a necropsias clínicas. MÉTODOS: Foram selecionados 90 casos do Serviço de Verificação de Óbitos de Recife -PE, de ambos os sexos, com história de hipertensão arterial essencial, com relação à espessura das paredes cardíacas, além da correlação com outros achados de necropsia e informes clínicos. RESULTADOS: Observouse associação significativa entre a presença de hipertrofia ventricular esquerda (HVE) e direita (HVD), e de cardiopatia hipertensiva grave e HVD. Houve predomínio da HVD e HVE em homens, na faixa etária dos 60-79 anos, com maior prevalência nas etnias parda e negra, e naqueles com estado nutricional adequado ou com sobrepeso e em obesos. CONCLUSÃO: Observou-se que a presença de HVD relaciona-se com HVE, sugerindo que há fatores patogênicos semelhantes envolvidos no desenvolvimento da hipertrofia bilateral. A HVD parece associar-se à doença cardíaca mais grave, podendo, a partir de outros estudos, ser considerada novo fator prognóstico na avaliação dos pacientes hipertensos.

OBJECTIVE: To measure the right and left ventricular thickness in deceased individuals with a history of hypertension submitted to clinical autopsies. METHODS: We selected 90 cases from the Death Verification Service of the city of Recife, state of Pernambuco, Brazil, of both sexes, with a history of essential arterial hypertension related to heart wall thickness, in addition to correlation with autopsy findings and other clinical reports. RESULTS: There was a significant association between the presence of left ventricular hypertrophy (LVH) and right ventricular hypertrophy (RVH) and between severe hypertensive cardiomyopathy and RVH. There was a predominance of RVH and LVH in men aged 60-79 years and a higher prevalence in the Brazilian mulatto and Black ethnic groups and in those with adequate nutritional status or overweight and obese individuals. CONCLUSION: It was observed that the presence of RVH was related to LVH, suggesting that there are similar pathogenic factors involved in the development of bilateral hypertrophy. The RVH seems to be associated with more severe heart disease and may, based on other studies, be considered as a new prognostic factor in the evaluation of hypertensive patients.

The aim of this study was to measure the thickness of the hard palate and its overlying mucosa using cone-beam computed tomography (CBCT), for purposes of miniscrew placement. The sample comprised 36 CBCT scans of patients aged 12 to 52 years from a database of the Orthodontics Department of the Federal University of Rio de Janeiro. Paracoronal views of the palatal region were reconstructed at 4, 8, 16 and 24 mm posterior to the incisive foramen. In each reconstruction measurements were taken at the suture, 3 mm and 6 mm bilaterally to it. Wilcoxon's test verified the differences between the selected regions. Total bone height decreased from the anterior to the posterior region. In cross sections 4, 16 and 24, bone height decreased from the suture laterally to the 3 mm region and then increased in the 6 mm region. The cortical thickness does not seem to be a concern because it presented a mean thickness of at least 1 mm at all sites evaluated. The measurements of the mucosa thickness decreased from lateral to median and from anterior to posterior regions. The most suitable areas for miniscrew placement in the palate are located 4 mm posterior to the incisive foramen, in the median or paramedian regions 3 mm adjacent to the suture.