Abstract Titrimetric and spectrophotometric assay of pantoprazole sodium (PPS) using permanganate as the oxidimetric reagent is described. In titrimetry, PPS is treated with a measured excess of permanganate in H2SO4 medium followed by the determination of unreacted oxidant by back titrating with a standard iron(II) solution. Spectrophotometry involves addition of a known excess of permanganate to PPS in H2SO4 medium followed by the measurement of absorbance of the residual permanganate at 545 nm. In both the methods, the amount of permanganate reacted corresponds to the PPS content. Experimental conditions that provide wide linear range, maximum sensitivity and selectivity, and accuracy and precisions have been optimized. In titrimetry, the calculations are based on a 1:1 (PPS : KMnO4) reaction stoichiometry and the method is applicable over 1.0-7.0 mg range. In spectrophotometry, Beer's law is obeyed over the concentration range 15.0-150.0 µg mL-1. The linear regression equation of the calibration graph is A = 0.78 + 0.005 C with a regression coefficient (r) of 0.9982 (n = 11). The apparent molar absorptivity is calculated to be 2.213 × 10³ l mol-1cm-1 and the Sandell sensitivity is 0.1954 µg cm-2. The limits of detection (LOD) and quantification (LOQ) calculated as per the ICH guidelines are 0.73 and 2.21 µg mL-1, respectively. Accuracy and precision of the assays were determined by computing the intra-day and inter-day variations at three different levels of PPS; the intra-day and inter-day RSD was < 3.09 % and the accuracy was better than 3.5 %. The methods were successfully applied to the determination of PPS in three different brands of tablets with good accuracy and precision, and without detectable interference by excipients. The accuracy was further ascertained by placebo blank and synthetic mixture analyses and also by recovery experiments via standard-addition procedure.

En este trabajo se describe la cuantificación de pantoprazol sódico (PPS) mediante una valoración redox usando permanganato como agente oxidante siguiendo la determinación potenciométrica y espectrofotométricamente. En potenciometría, se adiciona un exceso de permanganato en medio H2SO4 y el PPS es cuantificado valorando el excedente de permanganato con una solución estándar de Fe(II). La determinación espectrofotométrica se realiza agregando permanganato a una concentración que asegure un exceso conocido y se mide la absorbancia del permanganato residual a 545 nm. En ambos métodos la cantidad de permanganato que reacciona con PPS esta relacionada con el contenido de PPS. Fueron optimizadas las condiciones experimentales que proporcionan un rango lineal, selectividad y sensibilidad máxima, precisión y exactitud. En potenciometría, los cálculos se basan en una estequiométrica de reacción 1:1 (PPS: KMnO4) y el método es aplicable en un intervalo de 1.0-7.0 mg. En espectrofotometría, la ley de Beer es lineal en un intervalo de concentración de 15.0-150.0 µg mL-1. La regresión lineal para la curva de calibración es A = 0.78 + 0.005 C con un coeficiente de regresión (r) de 0.9982 (n = 11). El coeficiente de absorbitividad molar calculado fue de 2.213 × 10³ l mol-1 cm-1 y la sensibilidad de Sandell de 0.1954 µg cm-2. Los límites de detección y cuantificación calculados de acuerdo con la guía ICH son 0.73 y 2.21 µg mL-1, respectivamente. La precisión y exactitud de los ensayos fueron determinadas calculando la variación intra-día e inter-día a tres niveles de PPS; la desviación estándar relativa intra-día e inter-día fue < 3.09 % y la exactitud fue mejor que 3.5 %. Los métodos fueron exitosamente aplicados para la determinación de PPS en tres diferentes marcas de tabletas con buena exactitud y precisión y sin interferencia detectable por los excipientes. La exactitud fue asegurada realizando el análisis de un placebo blanco y una muestra sintética y también por los experimentos de recuperación vía el procedimiento de adiciones estándar.

Descrevem-se três novos métodos para o ensaio de estavudina (STV) na matéria-prima e nas formulações utilizando-se clroamina-T (CAT) e dois corantes, alaranjado de metila e índigo carmim como reagentes. A titulação envolve o tratamento de STV com excesso medido de CAT em meio de ácido clorídrico, e, quando a oxidação se completar, o oxidante que não reagiu é determinado iodometricamente. Os métodos espectrofotométricos compreendem a adição de excesso conhecido de CAT ao STV em ácido clorídrico, seguida da determinação do oxidante residual por meio da reação com quantidade fixada de alaranjado de metila, medindo-se a absorvância a 520 nm (Método A) ou índigo carmim, medindo-se a absorvância a 610 nm (Método B). Em todos os métodos, a quantidade de CAT que reagiu corresponde à quantidade de STV. No método titulométrico, a reação segue a estequiometria 1:1 (STV:CAT) e é aplicável na faixa de 1,5 a 10 mg de STV. Nos métodos espectrofotométricos, a absorvância aumenta linearmente com a concentração de STV. Os sistemas obedecem a lei de Beer nos intervalos de 0,2 a 2,0 mg/mL e 1,0 a 10,00 mg/mL para os métodos A e B, respectivamente, e os valores de sensibilidade de Sandell correspondentes são 0,004 e 0,015 µg/cm². Os limites de detecção e de quantificação são apresentados para ambos os métodos. A precisão e a exatidão intra-dia e inter-dia dos métodos desenvolvidos são avaliadas de acordo com as normas ICH. Os métodos foram aplicados com êxito aos ensaios de STV em comprimidos e em cápsulas e os resultados foram comparáveis com aqueles obtidos com o método de referência, utilizando-se o teste t de Student e o teste F. Não se observou interferência dos adjuvantes comuns em comprimidos. A exatidão e a confiabilidade dos métodos foram ajustadas por meio de experimentos de recuperação via método de adição de padrão.

Three new methods are described for the assay of stavudine (STV) in bulk drug and in dosage forms using chloramine-T (CAT) and two dyes, methyl orange and indigocarmine, as reagents. Titrimetry involves treating STV with a measured excess of CAT in hydrochloric acid medium, and after the oxidation of STV is judged to be complete, the unreacted oxidant is determined iodometrically. Spectrophotometric methods entail the addition of a known excess of CAT to STV in hydrochloric acid medium followed by determination of residual oxidant by reacting with a fixed amount of either methyl orange and measuring the absorbance at 520 nm (Method A) or indigo carmine and measuring the absorbance at 610 nm (Method B). In all the methods, the amount of CAT reacted corresponds to the amount of STV. In titrimetric method, the reaction follows 1:1 stoichiometry (STV: CAT), and is applicable over the range 1.5-10 mg of STV. In spectrophotometric methods, the absorbance is found to increase linearly with concentration of STV. The systems obey Beer's law for 0.2-2.0 and 1.0-10.0 mg/mL for method A and method B, respectively. The apparent molar absorptivities are calculated to be 5.7x10(4) and 1.5x10(4) L/mol/cm for method A and method B, respectively, and the corresponding Sandell sensitivity values are 0.004 and 0.015 µg/cm². The limits of detection and quantification are reported for both methods. Intra-day and inter-day precision and accuracy of the developed methods were evaluated as per the current ICH guidelines. The methods were successfully applied to the assay of STV in tablet and capsule formulations and the results were compared with those of a reference method by applying Student's t-test and F-test. No interference was observed from common tablet adjuvants. The accuracy and reliability of the methods were further ascertained by performing recovery experiments via standard-addition method.