Austenitic stainless steels processed by rolling are widespread in technological applications, since they have excellent mechanical and corrosion properties. This study investigated the effect of the cooling rate, microstructure and properties of 316L austenitic stainless steel under cold rolled conditions and by rapid solidification. The microstructure of the cold rolling processing steel was composed of austenite and a low percentage of delta ferrite. For the rapid solidification condition, the microstructure evolved from columnar and acicular dendrites to equiaxed dendrites with decreasing cooling rates, without the presence of delta ferrite due to the high cooling rate. Furthermore, thermal analyses in both routes revealed that oxidation kinetics was slower after rapid solidification in synthetic air. The microhardness in the cold rolling condition was lower than in the rapid solidification condition since the microstructure under the solidification condition is more refined. The sample in the rapid solidification condition region RS1 presented the highest corrosion resistance considering the pit potential. The passivation current density in the cold rolled condition was 5.72x10-5A/cm2, while under the rapid solidification condition, regions RS1 and RS2 were 2.24x10-5 A/cm2 and 3.72x10-6 A/cm2, respectively, and region RS3, did not present a passivation region in a broad range of potentials.

Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation produce coatings with many defects, which in turn reduce the resistance to wear, especially under severe conditions. High Power Impulse Magnetron Sputtering is a novel physical vapor deposition technique that produces homogeneous coatings. In this study, CrN and CrAlN monolayer coatings were deposited on AISI 304 stainless steel substrates using HiPIMS. X-Ray Diffraction, Scanning Electron Microscopy, Atomic Force Microscopy were used to evaluate the microstructure, phase composition, morphology and chemical composition of the coating. Results showed that HiPIMS is a promising technique to deposit CrN and CrAlN homogeneous coatings with high hardness and good adhesion to the substrate.

The effect of a travel speed of 200 mm/min as well as a tool rotational speed of 1200 rpm on butt joint quality of friction stir welding (FSW) ZK60 magnesium casting alloy containing 1.5 wt.% rare earths (ZK60-1.5RE) was investigated to determine microstructure and residual stresses. FSW results in the generation of heterogeneous metallurgical structures consisting of the base material (BM), stirred zone (SZ) and thermo-mechanical affected zone (TMAZ). The stirring action also produced a non-uniform distribution and segregation of intermetalics. The transversal distribution of the longitudinal welding stresses exhibits a "M-like" shape with mostly tensile stresses under the shoulder region and only one compressive stress peak in the advancing side of the SZ and TMAZ. It could be demonstrated that FSW of ZK60-1.5RE alloy was successful in the welding conditions applied during the present work.

In this paper we studied the influence of pre-treating the surface of 100Cr6 steel by ion beam nitriding at low temperature (380°C) on the surface topography and wear resistance of thin TiN coatings deposited by reactive ion beam assisted deposition. The specimens were characterized by grazing incidence X-ray diffraction, scanning electron microscopy and atomic force microscopy. The wear resistance of the TiN-coated specimens was evaluated by means of ball on disc tests. The results showed that application of a preliminary ion beam nitriding treatment slightly increased the surface roughness but improved the wear resistance of the 100Cr6 steel due to the formation of a diffusion zone containing the γ'-Fe4N nitride combined with the TiN coating.

Rare earth elements reportedly improve high temperature strength and creep resistance of Mg alloys. In the present work, ZK60 Mg alloys containing different amounts (0.5, 1.5 and 2.5 wt.%) of rare earth additions were prepared by thixocasting and submitted to solution and ageing heat treatments (T4, T5 and T6). The as-cast and heat treated microstructures were investigated by scanning electron microscopy and hardness was evaluated as a function of heat treatment parameters. In the as-cast state, the alloys are formed by globular α-Mg grains reinforced by a network of composite Mg-Zn-RE precipitates with either smooth or lamellar/acicular morphologies. Solution of the smooth precipitates took place in alloys containing 0.5 and 1.5wt.%RE for T4-500 ºC but no precipitates were dissolved with T4-380 ºC. The optimum temperature for T5 and T6 was identified as 175 ºC, while T6-500 ºC led to the highest hardness, followed by T5 and T6-380 ºC, respectively.